SPT WA-6022S, WA-1022S, WA-1222S, WA-8022S User Manual
WINDOW AIR CONDITIONERS
WA-6022S: 6,000 BTU
WA-8022S: 8,000 BTU
WA-1022S: 10,000 BTU
WA-1222S: 12,000 BTU
MULTI-STEP SPEED ELECTRONIC CONTROL
Important Safety Instructions ..........................1-3
Installation Instructions......................................4-7
Normal Sounds.................................................8
TA B LE O F C O N T E N T S
Air Conditioner Features..............................8-10
Care and Cleaning......................................10
Remote Control............................................11-13
Troubleshooting Tip......................................14
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
IMPORTANT SAFETY INSTRUCTIONS
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your air conditioner
properly. Just a little preventive care on your part can save you a great deal of time
and money over the life of your air conditioner. You'll find many answers to common
problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting
Tips first, you may not need to call for service at all.
To prevent injury to the user or other people and property damage, the following
instructions must be followed. Incorrect operation due to ignoring of instructions may
cause harm or damage. Please note the following symbols:
WARNING
CAUTION
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property.
Never do this.
WARNING
!
Plug in power plug
properly.
Otherwise, it may cause electric
shock or fire due to excess heat
generation.
!
breaker and a dedicated
power circuit.
Incorrect installation may cause
fire and electric shock.
!
!
Always ensure proper
grounding.
Incorrect grounding may cause
electric shock.
!
Do not open the unit
during operation
Do not operate or stop the
unit by inserting or
removing the power plug.
It may cause electric shock or fire
due to heat generation.
Do not operate with wet
hands or in damp
environment.
It may cause electric shock.
Do not allow water to run
into electric parts.
It may cause failure of machine
or electric shock.
Do not use the socket if it is
loose or damaged.
Always do this.
Do not damage or use an unspecified power
cord.
It may cause electric shock or fire.
If the power cord is damaged, it must be replaced by the
manufacturer or an authorised service center or a similarly
qualified person in order to avoid a hazard.
Do not direct airflow directly at room occupants.Always install circuit
This is not beneficial to one’s health.
!
Do not modify power cord length or share the
outlet with other appliances.
It may cause electric shock or fire due to heat generation.
Unplug unit immediately if strange sound, smell
or smoke is emitting from unit.
It may cause electric shock.
!
Keep firearms away.
It may cause fire.
!
If there was a gas leak from another appliance, ventilate
the room thoroughly before operating the unit.
It may cause explosion, fire and, burns.
It may cause fire and electric
shock.
Keep power cord away
from heat sources
It may cause fire and electric
shock.
It may cause fire and electric shock.
Do not use the power cord near flammable gas
or combustibles, such as gasoline, benzene,
thinner, etc.
It may cause an explosion or fire.
Do not disassemble or modify the unit.
It may cause failure and electric shock.
1
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
When removing and cleaning the
filter, be cautious of sharp edges
and corners.
It may cause an injury.
Do not use strong detergent
such as wax or thinner to
clean the unit.
Appearance may deteriorate
due to change of product color
or scratching of its surface.
!
Stop operation and close the
window during a storm or
hurricane.
Opened window may lead to
interior damage of furniture,
floor, and others.
!
Clean filters once every two
weeks. Be sure filter is replaced
properly.
Operation without filters may cause
failure.
Do not situate a pet or house
plant in front of unit’s direct
air flow.
This could injure the pet or plant.
Do not clean the air conditioner
with water or spray bottle.
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
!
Before cleaning and maintenance,
be sure power is turned off and
plug is disconnected.
Do not clean unit while operating.
May cause fire, electric shock or
injury.
!
Remove plug from outlet by
grasping the plug, never pull
on the cord.
It may cause electric shock and
damage.
!
Keep room well ventilated if used
together with a stove, etc.
An oxygen shortage may occur.
Not intended for special
purposes.
Do not use this air conditioner to
preserve precision devices, food,
pets, plants, and art objects. May
cause deterioration of quality, etc.
!
!
Inspect brackets frequently to ensure no
damages occurred due to prolonged
exposure to elements.
If bracket is damaged, there is
concern of damage due to falling
of unit.
!
Unplug from power source if
unit is not to be used for a
long time.
It may cause failure of product or
fire.
Do not block air inlets and
outlets.
Do not place heavy object on the power
cord and ensure that the cord is not
compressed.
It may cause failure of appliance
or accident.
!
Use caution when unpacking and
installing. Sharp edges can cause injury.
There is danger of fire or electric
shock.
!
If water enters the unit, turn the unit off and unplug
from outlet. Contact a qualified service technician.
CAUTION
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
2
Do not consume the water
drained from the air conditioner.
It contains contaminants and
could make you sick.
The appliance shall be installed in accordance
with national wiring regulations.
Do not operate your air conditioner in a wet room
such as a bathroom or laundry room.
Contact an authorized service technician for
repair or maintenance of this unit.
Contact the manufacturer or an installer if you
have questions regarding installation of this unit.
IMPORTANT SAFETY INSTRUCTIONS
NOTE:
The power supply cord with this air
conditioner contains a current detection
device designed to reduce the risk of fire.
Please refer to the section Operation
of Current Device for details. In the event
that the power supply cord is damaged,
it cannot be repaired, it must be replaced
with a cord from the manufacturer.
WARNING
Avoid fire hazard or electric shock. Do not
use an extension cord or an adaptor plug.
Do not remove any prong from the power
cord.
Grounding type wall
receptacle
Do not , un der any
circ um stances, cut,
remo ve , or bypass
the gr ou nding prong.
Power supply c ord
with 3 -p rong grounding pl ug
and cu rr ent detection dev ice
WARNING
For Your Safety
Do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance.
For Your Safety
WARNING
Prevent Accidents
To reduce the risk of fire, electrical shock, or injury to persons when using your
air conditioner, follow basic precautions, including the following:
· Be sure the electrical service is adequate for the model you have chosen. This
information can be found on the serial plate, which is located on the side of the
the cabinet and behind the grille.
· If the air conditioner i s t o b e in stalled in a w indow, yo u w ill pr obably w ant to cl ean
both sides of the g lass f irst. I f th e w indow is a tri ple-track ty pe w ith a sc reen pa nel
included, remove the screen completely before installation.
· Be sure the air c onditioner h as b een s ecurely a nd c orrectly in stalled a ccording to
the installation instructions in this manual. Save this manual for possible future
use in removing or installing this unit.
· When handling the air conditioner, be careful to avoid cuts f rom s harp m etal f ins
(front and rear coils).
Prevent Accidents
WARNING
Electrical Information
The complete electrical rating of your new room air conditioner is stated on the
serial plate. Refer to the rating when checking the electrical requirements.
· Be sure the air conditioner is properly grounded. To minimize shock and fire
hazards, proper grounding is important. The power cord is equipped with a
three-prong grounding plug for protection against shock hazards.
· Your air conditioner must be used in a properly grounded wall receptacle. If the
wall receptacle you intend to use is not adequately grounded or protected by a
time delay fuse or circuit breaker, have a qualified electrician install the proper
receptacle. Ensure the receptacle is accessible after the unit installation.
· Do not run air conditioner without side protective cover in place. This could
result in mechanical damage within the air conditioner.
· Do not use an extension cord or an adapter plug.
Electrical Information
Oper ation of Curr ent Device
The power supply cord contains a current device that senses
damage to the power cord. To test your power supply cord do
the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug
head. Press the TEST button, you will notice a click as the
RESET button pops out.
3. Press the RESET button, again you will notice a click as
the button engages.
4. The power supply cord is now supplying electricity to the
unit. (On some products this is also indicated by a light on
the plug head.)
NOTE:
· Do not use this device to turn the unit on or off.
· Always make sure the RESET button is pushed in for
correct operation.
· The power supply must be replaced if it fails to reset
when TEST button is pushed or when it cannot be
reset. A new one can be obtained from the manufacturer.
· If power supply cord is damaged, it cannot be repaired. It
MUST be replaced by one obtained from the manufacturer.
NOTE: This air conditioner is designed to operate
under the following conditions:
Outdoor temp:
Cooling
Indoor temp:
Note: Perfo rmance may be redu ced outside of the se
operating t emperatures.
° °
64-109 F/18-43 C
° °
62-90 F/17-32 C
3
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT- Save these
instructions for local inspector’s use.
IMPORTANT- Observe all
governing codes and ordinances.
Note to Installer- Be sure to leave these
instructions with the Consumer.
Note to Consumer- Keep these
instructions for futrue reference.
Skill level- Installation of this appliance
requires basic mechanical skills.
Completion time- Approximately 1 hour.
We recommend that two people install
this product.
Proper installation is the responsibility
of the installer.
Product failure due to improper installation
is not covered under the Warranty.
You MUST use all supplied parts and use
proper installation procedures as described
in these instructions when installing this air
conditioner.
CAUTION
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
Do not change the plug on the power cord
of the air conditioner.
Aluminum house wiring may present special
problems- consult a qualified electircian.
When handling the unit, be careful to avoid cuts
from sharp metal edges and aluminum fins located
on the front and rear coils.
TOOLS YOU WILL NEED
Phillips
screwdriver
Leveler
TOOLS YOU MAY USE
WINDOW REQUIREMENTS
Your air conditioner is designed to install in
standard double hung windows with opening
widths of 23 to 36 inches(584mm to 914mm).
Lower sash must have sufficient vertical
opening for installation (Table 1)
OFFSET
EXTERIOR
WALL
INNER
WINDOW SILL
INTERIOR
WALL
Model
Min. Vertica l
Opening
WA-6022S/WA-8022S WA-1022S/WA-1222S
14” (356mm)
Table 1
H
Slotted screwdriver
Pencil
Ruler or tape measure
Scissors or knife
NOTE:
Save carton and these installation instructions
for future reference. The carton is the best way
to store unit during winter or when not in use.
15.5” (394m m)
4
Loading...