SPT WA-1400H, WA-1410H, WA-1410E, WA-1400E User Manual

05-03-457 A029-OK.PDF

Instruction Manual

P O R T A B L E

Air Conditioner

Model No. WA-1400E Model No. WA-1410E
Model No. WA-1400H Model No. WA-1410H

ʳ

It is important that you read these
instructions before using your new
purchase and we strongly
recommend that you keep them in a
safe place for future reference.

05-03-457 A029-OK.PDF

TABLE OF CONTENTS

THANK YOU
ENERGY SAVING TIPS………..……………………………………………….. 2

SPECIFICATIONS..……………………………………………………………….3
BEFORE USE……….……………………………………………………………. 4
PARTS………..…………………………………………………………………….5
INSTALLATION.…………………………………………………………………...6
MOUNTING OF THE EXHAUST PIPE ………………………………………... 7
INSTALLATION OF THE CARBON FILTER…………………………………... 8
OPERATION ……………………………………………………………………… 9
NOTICE.…………………………………………………………………………..12
DRAINAGE………………………………………………………………………. 13
MAINTENANCE…………………………………………………………………. 15
TROUBLE SHOOTING…………………………………………………………. 16
DEFECTIVE NOTICE…………………………………………………………... 17
GUARANTEE……………………………………………………………………. 18
SAFETY POWER SUPPLY

CORD……………………………………………………………..19

1

05-03-457 A029-OK.PDF

THANK YOU

Thank you for choosing the portable air conditioner from SPT

USA

, a leading
brand in indoor air treatment. We would like you to enjoy the many benefits
this unit offers, so please take the time to read this manual carefully and take
full advantage of the many advanced features that your SPT

USA

Air

Conditioner offers you.
SPT

USA

specialize in complete indoor environment control, manufacturing
world-class air conditioners, dehumidifiers and air purifiers with innovative
technology.

In designing these advanced products, we have listened carefully to our
customers and have passed their views onto our research and development
laboratories.

We wish you many years of enjoyable use.
After reading this manual, please keep it in a safe place for future reference.

Energy Saving Tips

 Please use the unit in the recommended room size. (Refer to PAGE 3).
 Do not locate the air conditioner where furniture or other objects can

obstruct the airflow.

 Keep blinds/curtains closed during the sunniest part of the day.
 Close fireplace damper and floor or wall grills so that cool air does not

escape through the chimney or ductwork.

 Keep filters clean.

Set the unit to maximum cooling and high-speed fan initially, then adjust the
unit to a comfortable setting.

NOTE: It is recommended to turn on the air conditioner when the room
temperature is around 75˚F. Do not wait until the room is excessively hot.

2

05-03-457 A029-OK.PDF

SPECIFICATION

Model no.

WA-1400E
WA-1410E

WA-1400H
WA-1410H

Cooling capacity 14000 BTU/hr 14000 BTU/hr
Heating capacity -

Power/Ampere
consumption for cooling*

1250W/ 11.0A 1250W/ 11.0A

Power/Ampere
consumption for heating*

- 1250W/ 11.0A

14000 BTU/hr

Air volume (max. speed) 580m3/h 580m3/h
Humidity removal capacity 53.9 L/day 53.9 L/day
Recommended room size 500sq.ft. 500sq.ft.
Power supply 115V/60Hz/1phase
Compressor Rotary
Refrigerant R-22
Refrigerant load* 680 g
Fan speed 3
Timer 1~ 24 hours

o

Working temperature

Cooling: 64.4

Heating: 41o F~ 80.6oF

F~ 110oF

Thermostat 62 o F ~ 90 o F
Exhaust pipe 5 in x 59 in
Net Weight 86 lbs.
Dimension 14 x 21 x 30 in (WxDxH)

REMARK:

1. The data marked with '*' may vary for technical reasons.

2. Measuring condition for above is: Cooling – RT80.6
Heating – RT68

o

F, RH60%

o

F, RH60%
*RT means room temperature
*RH means room humidity.

• Un-insulated rooms such as sunrooms, garages, or attics should be less
than 500sq.ft.

• The following may effect the unit in reaching your set tempearature:
Outside Temperature, Room Size, Ceiling Height, Room Insulation,
Number of people in the room, Direct Sunlight and Source of Heat.

3

y

or

e a qualified

05-03-457 A029-OK.PDF

BEFORE USE

Important!

 Transport the unit in an upright position only or leave in upright position

for at least 2 hours before use. Keep at least 20 inches away from the
wall. (Figure 1 & 4)

 Always place the unit on an even surface.
 Make sure the unit is connected to a correctly grounded power suppl

(refer to the rating label located at the back of the unit).

 An opening in a window or wall is required to accommodate the

exhaust hose (kit supplied) to expel the warm air.

 Do not cover or obstruct the appliance inlet or outlet grilles (Figure2).
 To avoid the risk of shock, the product should never be used in

bathrooms, shower rooms or in any other steamy/wet areas (Figure 3).

 The unit will cool when the room temperature is between 64°F and

110°F depending on the thermostat setting.

 Do not sit or place objects on the unit.
 Do not touch the unit with wet/damp hands or when standing barefoot.
 Avoid all contact with chemical based materials.
 The filter must be used with the product at all times. When removing f

cleaning, always disconnect the power first.

 Turn off the appliance when not in use.
 For storage, drain all water and clean the unit / filters before storage.
 Drainage of the water container is required before moving the unit or

putting it into storage.

FIG. 1

FIG. 2

FIG. 3

 If the electric socket is different from the plug provided, hav

 Do not pull the power cord or place it near a source of heat; always

 If the power cord is damaged, it must be replaced by a service agent or

electrician replace the plug with a suitable one. Avoid the use of
adaptors, multiple sockets and/or extension cords; if their use is
necessary, ensure that they conform to the current safety regulations.

unroll it completely to avoid the possibility of dangerous overheating.

a similarly qualified person.
THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE

ABOVE INSTRUCTIONS ARE NOT FOLLOWED.

FIG. 4

4

05-03-457 A029-OK.PDF

PARTS

Front Back









1. Control Panel

2. Air outlet

3. Carrying handle

4. Caster

Accessories

10. Inward adaptor - for insertion over hose
and connect to back of the air conditioner.

11. Round connector - for insertion over hose
and into foam strip (or into hole in the
wall/window).

12. Exhaust hose:
Length: 14”-60”
Diameter: 4.75”

13. Round cap for to cover round connector
when unit not in use.

14. Foam strip - for filling the open window
space, with opening for inserting the hose
& round connector. 7” x 24” x .75”

15. Foam strip - for filling the open window
space: 7” x 24” x .75”

16. Drain tube for continuous drainage

17. Active carbon filter

18. Remote control

19. Water tray

FIG. 5



5. Air filter

6. Air inlet

7. Exhaust air outlet

8. Water stopper / drainage point

9. Cord storage























FIG.6





FIG. 7

5

19