SPT SPT7871SCU, SPT7871SIQ Datasheet
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
FEATURES
• 10-Bit, 100 MSPS Analog-to-Digital Converter
• Monolithic Bipolar
• Single-Ended Bipolar Analog Input
• -1.0 V to +1.0 V Analog Input Range
• Internal Sample-and-Hold
• Internal Voltage Reference
• Programmable Data Output Formats
• Single Ended TTL Outputs
• Differential ECL Clock Input
• ECL Version Available as the SPT7870
SPT7871
10-BIT, 100 MSPS TTL A/D CONVERTER
APPLICATIONS
• Professional Video
• HDTV
• Communications
• Imaging
• Digital Oscilloscopes
GENERAL DESCRIPTION
The SPT7871 is a 10-bit, 100 MSPS analog-to-digital converter, with a two stage subranging flash/folder architecture.
The bipolar, single-ended analog input provides an easy
interface for most applications. Programmable data output
formats provide additional ease of implementation and flexibility. The device supports high speed TTL outputs.
BLOCK DIAGRAM
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Analog Input
Signal Processing Technologies, Inc.
Phone: (719) 528-2300 FAX: (719) 528-2370 Website: http://www.spt.com E-Mail: sales@spt.com
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
V
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
IN
T/H
Σ
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
3-Bit
Flash
(MSB)
3-Bit
DAC
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
V
*
T
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
V
*
M
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
V
*
B
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
*
Provided for reference decoupling purposes only.
Internal
AAAAA
+1.0 V Reference
Reference
Ladder
Internal
-1.0 V Reference
AAAAA
4755 Forge Road, Colorado Springs, Colorado 80907, USA
The resolution and performance of this device makes it well
suited for professional video and HDTV applications. The onchip track-and-hold provides for excellent AC performance
enabling this device to be a converter of choice for RF
communications and digital sampling oscilloscopes. The
SPT7871 is available in a 44L cerquad package in the
industrial temperature range and in die form.
EE
T/H
Error Correction Logic
AV
CC
Timing and
8-Bit Folder
ADC
(LSB)
Control
AGND
DV
CC
D10 (Overrange)
D9 (MSB)
D8
D7
Output
Latches
and
Buffers
(TTL)
DGND
D6
D5
D4
D3
D2
D1
D0
MINV (CMOS/TTL)
LINV (CMOS/TTL)
CLK (ECL)
NCLK (ECL)
V
AAAAAAAAAAAAA
AAAAAAAAAAAAA
AAAAAAAAAAAAA
ABSOLUTE MAXIMUM RATING (Beyond which damage may occur)
Supply Voltages
AV
........................................................................
CC
DV
........................................................................
CC
V
.............................................................................
EE
0 to +6.5 V
0 to +6.5 V
0 to -6.5 V
Output
Digital Outputs ......................................... +30 to -30 mA
Temperature
1
Operating Temperature .............................-40 to + 85 °C
Input Voltages
Analog Input............................................. VEE≤VIN≤V
LINV/MINV Inputs .......................... -0.5 V to VCC +0.5 V
CC
Junction Temperature ........................................ + 175 °C
Lead, Soldering (10 seconds)............................ + 300 °C
Storage ....................................................-60 to + 150 °C
CLK/NCLK Inputs........................................... VEE to 0 V
Note: 1. Operation at any Absolute Maximum Ratings is not implied. See Electrical Specifications for proper nominal applied
conditions in typical applications.
ELECTRICAL SPECIFICATIONS
TA = +25 °C , DV
PARAMETERS CONDITIONS LEVEL MIN TYP MAX UNITS
DC Performance
Resolution 10 Bits
Differential Linearity f
Integral Linearity, Best Fit f
No Missing Codes f
Analog Input
Input Voltage Range V ±1.0 V
Input Bias Current I -100 25 100 µA
Input Resistance I 50 150 kΩ
Input Capacitance V 5 pF
Input Bandwidth Full Power IV 150 180 MHz
±FS Offset Error I ±20 ±100 mV
Timing Characteristics
Minimum Conversion Rate V 2 MSPS
Maximum Conversion Rate IV 100 MSPS
Pipeline Delay (Latency) IV 2 Clock
Transient Response V 10 ns
Overvoltage Recovery Time V 10 ns
Output Delay (td)V3ns
Aperture Delay Time V 1 ns
Aperture Jitter Time V 5 ps (rms)
Dynamic Performance
Effective Number of Bits
fIN = 10 MHz I 8.1 8.5 Bits
fIN = 25 MHz I 8.1 8.5 Bits
fIN = 25 MHz f
fIN = 50 MHz I 7.5 7.8 Bits
fIN = 50 MHz f
Signal-To-Noise Ratio
fIN = 10 MHz I 52 54 dB
fIN = 25 MHz I 52 54 dB
fIN = 25 MHz f
fIN = 50 MHz I 52 54 dB
fIN = 50 MHz f
Total Harmonic Distortion
fIN = 10 MHz I -56 -62 dBc
fIN = 25 MHz I -56 -60 dBc
fIN = 25 MHz f
fIN = 50 MHz I -48 -51 dBc
fIN = 50 MHz f
CC
=AV
= +5.0 V, V
CC
1
= -5.2 V, V
EE
= ±1.0 V, f
IN
TEST TEST
= 6.4 MHz I -1.0 ±0.5 ±1.25 LSB
Clock
= 6.4 MHz I ±1.0 ±2.0 LSB
Clock
Full Temperature V ±2.5 LSB
= 6.4 MHz I Guaranteed
Clock
Full Temperature V 100 kΩ
= 100 MHz V 8.0 Bits
clock
= 100 MHz V 7.5 Bits
clock
= 100 MHz V 51 dB
clock
= 100 MHz V 50 dB
clock
= 100 MHz V -56 dBc
clock
= 100 MHz V -50 dBc
clock
= 80 MHz, 50% clock duty cycle, unless otherwise specified.
clock
SPT
SPT7871
2 9/7/98
ELECTRICAL SPECIFICATIONS
TA = +25 °C , DV
PARAMETERS CONDITIONS LEVEL MIN TYP MAX UNITS
Dynamic Performance
Signal-to-Noise + Distortion (SINAD)
fIN =10 MHz I 51 53 dB
fIN = 25 MHz I 51 53 dB
fIN = 25 MHz f
fIN = 50 MHz I 47 49 dB
fIN = 50 MHz f
Spurious Free Dynamic Range
fIN = 10 MHz V 65 dB FS
fIN = 25 MHz V 63 dB FS
fIN = 50 MHz V 52 dB FS
Two-Tone IMD Rejection
Differential Phase V 0.5 Degree
Differential Gain V 1 %
Power Supply Requirements
AVCC Supply Voltage IV 4.75 5.0 5.25 V
DVCC Supply Voltage IV 4.75 5.0 5.25 V
VEE Supply Voltage IV -4.95 -5.2 -5.45 V
VCC Supply Current Full Temperature VI 210 248 mA
VEE Supply Current Full Temperature VI 128 151 mA
Power Dissipation Full Temperature VI 1.7 2.0 W
Power Supply Rejection Ratio IV 30 dB
Digital Inputs
LINV, MINV V CMOS/TTL Logic
Clock Inputs
Logic 1 Voltage (ECL) VI -1.1 V
Logic 0 Voltage (ECL) VI -1.5 V
Maximum Input Current Low VI -100 +100 µA
Maximum Input Current High VI -100 +100 µA
Pulse Width Low (CLK) IV 4.0 250 ns
Pulse Width High (CLK) IV 4.0 250 ns
Rise/Fall Time 20% to 80% IV 1.5 ns
Digital Outputs
Logic 1 Voltage (TTL) 2 mA VI 2.4 2.8 V
Logic 0 Voltage (TTL) 2 mA VI 0.5 0.8 V
t
Rise
t
Fall
1
2048 pt FFT using distortion harmonics 2 through 10.
2
Measured as a second order (f1-f2) intermodulation product from a two-tone test with each input tone at 0 dBm.
CC
=AV
= +5.0 V, V
CC
2
= -5.2 V, V
EE
= ±1.0 V, f
IN
TEST TEST
= 100 MHz V 50 dB
clock
= 100 MHz V 47 dB
clock
10% to 90% V 2.0 ns
10% to 90% V 2.0 ns
= 80 MHz, 50% clock duty cycle, unless otherwise specified.
clock
V -65 dBc
TEST LEVEL CODES
All electrical characteristics are subject to the
following conditions:
All parameters having min/max specifications
are guaranteed. The Test Level column indicates the specific device testing actually performed during production and Quality Assurance inspection. Any blank section in the data
column indicates that the specification is not
tested at the specified condition.
Unless otherwise noted, all tests are pulsed
tests; therefore, TJ = TC = TA.
SPT
TEST LEVEL
I
II
III
IV
V
VI
3 9/7/98
TEST PROCEDURE
100% production tested at the specified temperature.
100% production tested at TA = +25 °C, and sample
tested at the specified temperatures.
QA sample tested only at the specified temperatures.
Parameter is guaranteed (but not tested) by design
and characterization data.
Parameter is a typical value for information purposes
only.
100% production tested at TA = +25 °C. Parameter is
guaranteed over specified temperature range.
SPT7871
Loading...