SPT SD-9239SS, SD-9293W Instruction Manual

®
SD-9239SS-Stainless Steel
SD-9293W-White
Dishwasher Features
................ 1
Safety Information ...................... 2
Operating Instructions
Dishwasher Features ...................... 3
Wash Cycle Table .......................... 4
Detergent ................................ 5
Rinse Aid ................................ 5
All-in- 1 Program .......................... 6
Filtering System .......................... 9
Caring for the Dishwasher .................. 9
Electrical Connection ....................... 10
Troubleshooting Tips
Before calling for service ................ 11,12
O
DISHWASHER FEATURES
This electric dishwasher has the common characteristics of other house-hold dishwashers, as well as these unique specialties:
Time delay feature
Allows you to program the operation to begin at a later time, between 1 to 24 hours. Program to run during off-
peak hours helps reduce etetricity cost.
Error alarm
Fault codes display would inform the userof
abnormal status of the machine.
Rinse aid Warning Indicator
When the rinse aid is running low, a refill reminder will be displayed on the panel. This ensures the machin continues to operate at optimum performance.
Stainless steel tub
_6i;i_ 6 wash programs
Choose from 6 wash cycles, based on load and soiled IeveI:AtI-in-1, Heavy, Normal, Light, Rinse and Speed.
...........................................................NOTE:
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance of electric current. This appliance is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is installed and grounded in accordance
with all local codes and ordinances.
ZkWARNING!
Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified
electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance ;If it is not fit
for the outlet .have a proper outlet installed
by a qualified electrician.
WARNING! PROPER USE
Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher.
Do not touch the heating element during or immediately after use.
Do not wash plastic items unless they are marked
dishwasher safe or the equivalent. For plastic
items not so marked, check the manufactures
recommendations.
Use only detergent and rinse additives designed for an automatic dishwasher. Never use soap, laundry detergent, or hand washing detergent
in your dishwasher. Keep these products out of children's reach.
Keep child away from detergent and rinse aid, keep child away from the open door of the dishwasher, there could still be some detergent left inside.
The door should not be left in the open position since this could present a tripping hazards.
During installation, the power supply must not be excessively or dangerously bent or flattened.
Do not tamper with controls. The appliance is not intended for use by young
children or infirm persons without supervision.
Dishwasher detergents are strongly alkaline,they
can be extremely dangerous if swalIowed.Avoid
contact with skin and eyes and keep children away from the dishwasherwhen the door is open.
Do not operate your dishwasher unless all enclosure panels are properly inplace. Open the
door very carefully if the dishwasher is operating,
there is a risk of water squirting out.
Do not place any heavy objects of stand on the door
when it is open. The appliance could tip forward. When loading items to be washed:
1) Locate sharp items so that they are not likely to
damage the door seal;
2) Load sharp knives with the handles up to reduce the risk of cut-type injuries.
When using your dishwasher, you should prevent plastic item from contacting with heating element.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a
hazard.
Please dispose of packing materials properly.
Use the dishwasher only for its intended function.
Remove the door to the washing compartment when
removing an old dishwasher from service or discarding it.
Young children should be supervised to ensure that they do not play with the appliance.
Check that the detergent receptabte is empty after completion ofthewash cycle.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY
SAVE THESE INSTRUCTIONS
2
Control Panel
0 0 0 ;;
LI Display Program remaining time,
window:
delay time, running indicator, fault codes and etc.
[] Delay Button Press to program delay start.
I_1 rogram indicator lights: Indicates the
selected wash cycle.
_1 Wash Program Selector: Press to select one
of the six programs.
l_ Rinse aid Iowwarning light.
D Power indicator light.
D Power switch: To turn on/off the power supply.
D tart/Pause button: To start the selected
washing program or pause the washing program when the machine is working.
Dishwasher Features
J
Front View
(Door Open)
......................._ 9
10 ,i ,_
JJ
_°_ 1
2
Back View
1 Upper Basket 2 SprayArms 3 Lower Basket
4 Main Filter 5 Detergent Dispenser
6 Cup Shelf
7 Silverware Basket 8 Coarse Filter
9 RinseAid Dispenser
10 Portable FaucetAdapterAssembty 11 Power Cord 12 Caster
WASH CYCLE TABLE
All in 1
Normal
(AHAM)
Rinse
For all soiled loads, such as
pots,pans,casserole dishes and dishes that have been
sitting with dried food on for a while.
For normally soiled loads, such as pots, pIates,gtasse., and lightly soiled pans. standard daily cycle.
For dishes that just need a quick rinse.
Pre-wash Pre-wash
wash (136°F)
Rinse (154°F) Drying.
Pre-wash
Wash (136°F)
Rinse Rinse (149°F)
Drying
Pre-Wash Pre-Wash
All in1
18g
130
115
25
0.545
0.05
3.65
ERROR CODES
When un/Z experiences ma/funct/on, the app//ance wi// d/sp/ay error codes
Codes Meanh_gs Possible Causes
Faucets is not opened, or water intake is restricted,
E1 Long inlet time. or water pressure is too low.
Long heating time,
E3 unit not reaching the required temperature Malfunction of temperature sensor or of heating element.
4
Loading...
+ 9 hidden pages