SPT SB-818 Instruction Manual

BABY BOTTLE STERILIZER & DRYER
Model: SB-818
(Blue or Pink)
INSTRUCTIONS MANUAL
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USE.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1.
Always place this appliance on a firm, flat and level surface.
2.
Place this appliance in an area where it is not accessible to children. Do not cover it.
3.
Do not place near any heat sources such as stoves, radiators, heaters or high moist, freezing areas.
4.
Do not move the appliance while it is operating.
5.
Do not over load or place too many heavy objects inside.
6.
Do not place painted or non-heat resistant items into the appliance, which may discolor and/or deform.
7.
Use only supplied rack. Do not use non-genuine layer rack for fear of deformation
8.
Do not block the heating outlet. This will damage the device itself.
9.
Do not immerse any part of the appliance in water or other liquid. Do not pour water onto the unit.
10.
Do not place items on top of the appliance.
11.
Avoid opening the door too frequently during operation to maintain product life.
12.
This appliance produces high heat (154°F). Do not p lace hand into the unit or touch inside surfaces during and immediately after use.
13.
DO NOT touch the heating outlet. Heating can cause burns.
14.
Please use dedicated socket with specified voltage. Before use, please check rating and confirm voltage.
15.
This appliance is not intended for use by person (including children) without operation knowledge or control ability, unless they have been given supervision. The person who operates this appliance is responsible for its safety and usage.
16.
Children should be supervised to ensure that they do not play with the appliance.
17.
Never pull the plug by the cord.
BEFORE NOT USE
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
using the appliance, check the power cord for any signs of damage. If the cord is found to be damaged,
and contact Sunpentown.
DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE.
DO
Loading...
+ 4 hidden pages