SPT AB-763B Operating Instructions Manual

OPERATING INSTRUCTIONS

AB-763B

Thank you for your purchase. Please read this instructions manual

thoroughly before use and keep in a safe place.

DEEP KNEADING FOOT MASSAGER

FEATURES

 Elegant and ergonomic design.
 Infrared for heating treatment.
 Four groups of massager discs for comfortable kneading experience.
 Foot rollers with pressure nodes target vital reflex points on your soles,

replicating the push and release technique used by professional
reflexologists.

 Stimulates blood circulation, relieves tension and reduces stress.
 Detachable fabric covering for easy cleaning.

NAME OF PARTS

CONTROL PANEL

DISPLAY PANEL

 Stand by mode: Power Indicator flashes and panel displays 00:00.
 When in session, panel alternately displays the remaining massage time

and selected mode and intensity:
12:58 = remaining session time
HE-L = Heat Low / HE-H = Heat High
P1 = Program 1 / P2 = Program 2
.01 / .02 / .03 / .04 / .05 = corresponding intensity level

OPERATING INSTRUCTIONS

Connect coupler
terminal of power
cord according to
direction of socket.

Plug the unit into a
properly grounded
wall outlet.

Choose a chair of
equal stature and
place feet into the
foot beds.

Press to select High
or Low infrared
heating treatment.

Press to select
massage mode:
I = Program 1
II = Program 2

Press to increase or
decrease massage
intensity:
1 = Lowest
5 = Highest

Foot rollers with
pressure nodes
stimulates
acupuncture points.

Press STOP button
to end session at
any time. Unplug
when not in use.

NOTE
 A 15-minute massage session is recommended. The unit will

automatically stop after 15 minutes.

 The massage may tickle, which is normal and a sign of blood circulation

improvement.

 IMPORTANT: Do not sit or stand on the unit or exert excessive pressure

on the foot beds. This may cause overheating and damage to the motor.

 The kneading discs will not stop instantaneously; they will complete one

final cycle before stopping and returning to “home position”.