Sprint Nextel 2422 User Manual

2.4GHZ DIGITAL SPREAD SPECTRUM CORDLESS TELEPHONE

Accessory Handset For Use With 2432 System

IntroductionIntroduction

Introduction

IntroductionIntroduction

IMPORTANT:

The 2422 is an Accessory Handset for use with the 2432 Sprint GIGAPHONE system. You must have the 2432 in order to use the 2422 Accessory Handset.

This manual is designed to familiarize you with the 2422 Accessory Handset setup, registration and basic functions. For detailed operational instructions, please refer to the 2432 manual.

To order additional system Handsets (model# 2422), battery packs, or headsets, call your nearest Sprint Business office, or visit one of Sprint's convenietly located Retail stores.

National Help Desk CALL Sprint TOLL FREE AT 1-800-949-4357

Important Safety InstructionsImportant Safety Instructions

Important Safety Instructions

Important Safety InstructionsImportant Safety Instructions

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners

or aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water (for example, near a bath tub, kitchen sink,

or swimming pool).

5. Do not place this product on an unstable cart, stand, or table. The product may

fall, causing serious damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided for

ventilation. To protect it from overheating, these openings must not be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation where proper ventilation is not provided.

7. This product should be operated only from the type of power source indicated

on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not locate this product where

the cord will be abused by persons walking on it.

9. Never push objects of any kind into this product through cabinet slots as they

may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

10. To reduce the risk of electric shock, do not disassemble this product, but take

it to an authorized service facility. Opening or removing cabinet parts other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassemb-ling can cause electric shock when the appliance is subsequently used.

11. Do not overload wall outlets and extension cords as this can result in the risk

of fire or electric shock.

12. Unplug this product from the wall outlet and refer servicing to a Sprint authorized

service facility under the following conditions:

A. When the power supply cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions, because improper adjustment of other controls may result in damage and will often require extensive work by an authorized technician to restore the product to normal operation.

E. If the product has been dropped and the cabinet has been damaged.

F. If the product exhibits a distinct change in performance.

13. Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lighting.

14. Do not use the telephone to report a gas leak in the vicinity of the leak.

SAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONS

Getting StartedGetting Started

Getting Started

Getting StartedGetting Started

Setup

Installation of Battery Pack in Handset

Registration And Operation Of The 2422 Accessory Handset

Your Sprint GIGAPHONE system can operate up to 4 Handsets. The accessory Handset consists of the following:

Handset

Belt Clip

Battery Pack

Charger Unit

Setup Of The 2422 Accessory Handset

1. Plug the AC power adapter into an

electrical outlet.

2. Remove the Handset battery cover

by pressing on the indent and sliding downward.

3. Place the new battery pack in the

Handset, with the metal contacts

aligned with the charge contacts in the battery compartment.

4. Replace the battery cover by sliding

it upward.

5. Place the Handset in the Charge

Cradle, and allow it to charge for 12

hours. After the initial charge, a maintenance charge of 8 hours should be sufficient.

Follow the steps below:

1. Remove the battery cover by pressing

on the indent and sliding downward.

2. Place the new battery pack in the

handset with the metal contacts aligned with the charge contacts in the battery compartment.

3. Replace the battery cover by sliding

it upwards.

4. If the new battery pack is not already

charged, place the handset in the base unit, or a remote charging stand, and allow it to charge for 12 hours. After initial charge, a maintenance charge of 8 hours should be sufficient.

The original Handset that is shipped with your Sprint GIGAPHONE system will be automatically registered to the Base. This Handset is HANDSET 1.

As you register additional Handsets to the system, they will be assigned extension numbers in the following order: HANDSET 2, HANDSET 3, and finally HANDSET 4.

Whenever a Handset battery pack is installed, the Handset will automatically begin

SEARCHING FOR BASE (if previously registered), or it will prompt you to ENTER BASE ID to register the new Handset.

+ 6 hidden pages