SpringWell WS1, WS4 Installation Instructions Manual
1
WELL WATER FILTER SYSTEM
MODELS: WS1, WS4
Installation Instructions
CUSTOMER SERVICE IS AVAILABLE MON-FRI 9AM-6PM EST
800-589-5592
WWW.SPRINGWELLWATER.COM
SpringWell Water Systems has once again taken the
latest technologies in water filtration and designed a
more economical and environmentally friendly well
water system."
#
$
2
Additional Parts Included
PLEASE READ INSTRUCTIONS FULLY BEFORE INSTALLATION.
Be sure to follow all applicable plumbing codes. The system must be
installed on main water supply line.
CAUTION: Do not install on well water unless you have spoken to a
customer service representative first.
NOTE: This system does require electricity.
1. Electronic Head
2. 50’ Drain Line
3. Bypass Valve
4. Hose Clamp
123
4
8
If the tank is not perfectly straight, carefully lift the tank straight up a few
inches and tap it on the ground until the tank stands vertical and fits
snuggly into the tank boot.
3
Product Specs
WS1
Tank Width
10”
Tank Height
54” (64” with head)
Flow Rate
12 GPM Service
Connection Size
3/4”
Backwash Rate
5 GPM
Operating Pressure
25-80 PSI
Operating Temperatures
36 - 120 F
pH Range
6.8 - 10
For replacement filters, please visit: www.springwellwater.com/replacements
WS4
Tank Width
13”
Tank Height
54” (64” with head)
Flow Rate
18 GPM Service
Connection Size
3/4”
Backwash Rate
7 GPM
Operating Pressure
25-80 PSI
Operating Temperatures
36 - 120 F
pH Range
6.8 - 10
Loading...