SpringWell FS1, FS4 Installation Instructions Manual

1
SALT-FREE WATER SOFTENER
MODEL: FS1, FS4
Installation Instructions
800-589-5592
WWW.SPRINGWELLWATER.COM
Our high-tech SpringWell FutureSoft salt-free water softener is a chemical-free, maintenance-free and
environmentally friendly alternative to salt-based softening. Eliminate scale, extend the life of your
appliances and make cleaning easier today!
2
Additional Parts Included
PLEASE READ INSTRUCTIONS FULLY BEFORE INSTALLATION.
Be sure to follow all applicable plumbing codes. The system must be installed on main water supply line.
CAUTION: Do not install on well water unless you have spoken to a customer service representative first.
The main tank sits in a “boot” and may need to be adjusted after shipping.
1. Pre-filter housing
2. 5 micron sediment filter
3. O-Ring for pre-filter housing
4. Mounting bracket for pre-filter housing
5. Spanner wrench for pre-filter housing
6. Hose bib assembly
7. Bypass valve
8. 1” MNPT fittings

123
4
567
8
#
3
Product Specs
FS1
Tank Width
6”
Tank Height
35” (39” with head)
Service Flow
12 GPM
Max Pressure
75 PSI
Operating Temps
35 - 110 F
Connection Size
1”
For replacement filters, please visit: www.springwellwater.com/replacements
If the tank is not perfectly straight, carefully lift the tank straight up a few inches and tap
it on the ground until the tank stands vertical and fits snuggly into the tank boot.
FS4
Tank Width
9”
Tank Height
48” (52” with head)
Service Flow
15 GPM
Max Pressure
75 PSI
Operating Temps
35 - 110 F
Connection Size
1”
Loading...
+ 6 hidden pages