
WHOLE HOUSE FILTER &!
SALT-FREE WATER SOFTENER
MODELS: CSF1, CSF4
Installation Instructions
CUSTOMER SERVICE IS AVAILABLE MON-FRI 9AM-6PM EST
You get the best of both worlds when you combine the
benefits of our high-tech SpringWell FutureSoft and
environmentally-friendly salt-free water softener and our
whole house water filter, which uses the highest quality
coconut shell catalytic carbon that targets the
contaminants that we find in our water supplies today!

Additional Parts Included
PLEASE READ INSTRUCTIONS FULLY BEFORE INSTALLATION.
Be sure to follow all applicable plumbing codes. The system must be
installed on main water supply line.
CAUTION: Do not install on well water unless you have spoken to a
customer service representative first.
1. Bypass Valve
2. 1” MNPT Fittings (x2)
3. Mounting Bracket for Pre-Filter
4. Hose Bib Assembly
5. Pre-Filter Housing
6. Spanner Wrench for Pre-Filter Housing
7. O-Ring for Pre-Filter Housing with Lube
8. Sediment Filter

For replacement filters, please visit: www.springwellwater.com/replacements
Pre-Filter Change /
Replacement
Media Change /
Replacement
Every 6 Years or 1
Million Gallons
Pre-Filter Change /
Replacement
Media Change /
Replacement
Every 6 Years or 1
Million Gallons

If the tank is not perfectly straight, carefully lift the tank straight up a few inches and
tap it on the ground until the tank stands vertical and fits snuggly into the tank boot.