Spring USA Max Induction SM-351C, Max Induction SM-353C Operation Manual

Operation

Manual

By

Models: SM-351C

&

SM-353C (International)

Buffet

Induction

Cookware

The Evolution of Intelligent Design®

Spring USA®

127 Ambassador Drive

Suite 147

Naperville, IL 60540-4079

Phone: [phone]

Fax: [phone]

Email: [e-mail]

Web: www.springusa.com

1

8

Before You Begin:

Read the following instructions in their entirety.

Use proper cookware. Your cookware must be induction-ready.

Check your ventilation. Your MAX Induction® Range must have the
proper ventilation in order to operate correctly. There must be at least 4”
of space available around your induction range.

Ensure that you have dedicated power to the installed location. Verify the
electrical requirements for your specific model induction range, as shown
on Page 4.

Suitable Cookware

Stainless Steel Multi-Ply
Cookware

Iron/Steel Frying Pan Cast Iron

Aluminum Cookware

with Induction Disc

Iron/Steel Tray

Enameled Ware

Copper, Bronze Or Aluminum
Cookware

Glass Cookware

Ceramic Cookware

Without Special Coating

Pans with a Concave Bottom

Bowl Shaped Cookware

Cookware with a
Diameter of Less

Than 4.5”

Unsuitable Cookware

2

www.springusa.com

(1) 630-527-8600

The Evolution of Intelligent Design®

7

Reinforced,
Tempered Glass
Surface

Features SmartScan®
Technology

Surface Responds
Faster, Without
Surges or Spikes in
Temperature

Increased Efficiency

Easy to Read LCD
Panel Readout

Tempered, Black­Smoked Glass
Faceplate

Durable, Brushed
Stainless Steel Body
Design

Features Leveling
Leg Design with Non­Skid, Non-Scratch
Base

Removable Mesh Air
Filter

208-240 Volts ~ 60Hz

3500 Watts

Safety Precautions:

Plug the power cord into a dedicated circuit. Note: Nothing else should be
plugged into this circuit. Each MAX Induction® Range must have its own,
sufficient power supply as outlined below. Once you have plugged the unit
in, it will beep, and an ‘EO’ code will appear in the display window.

To Begin:

Turn the unit on. An ‘EO’ code will appear next in the digital window,
indicating the induction range is searching for cookware.

Turn the knob clockwise to turn the unit on. Your MAX Induction® range
will always start out in the “Cook” mode. “Cook” is the default mode.

Place suitable cookware within the circle on top of the MAX Induction®
Range.

Select either the “Cook” Mode or the “Temp” Mode.

In “Cook” mode, turn the dial clockwise. The LED will display cook
power levels of 1 thru 20.

In “Temp” mode, turn the dial clockwise. The LED will display
temperature levels from 110° to 400° fahrenheit.

Turn the knob clockwise to set the power level or temperature.

To shut the induction range off, turn the knob counter clockwise until you
hear the unit ‘click’ and turn off.

Actual range temperatures may vary due to a number of variables, such as
ambient temperature in the immediate surrounding area, content and volume
of food being heated or cooked, and whether or not you are using a lid on
the serving vessel.

-----------------

Never attempt to service any part of your MAX Induction® Range on your
own. Contact our Service Department by calling (1) 630-527-8600.
Attempting to service your Induction Range on your own, or through an
unauthorized repair facility automatically voids your warranty. For service
forms, visit the Spring USA website.

For Limited Warranty Information, visit www.springusa.com

Note:

This equipment uses, generates and can radiate radio frequency energy. If
not installed correctly and used in accordance with the instructions, may
cause harmful interference to radio communications. Users or guests with
Pacemakers should contact their health care professional prior to using this
product.

NEMA 6-20P
6’ Cord

3500 Watts ~ 60 Hz208-220 Volts / 15 AmpsSM-351C

CEE 7/7 16A

1.8 m Cord

3000 Watts ~ 50 Hz220-240 Volts / 16 AmpsSM-353C

Plug TypePeak PowerVoltage / AmpsModel #

Specifications:

Induction Range Error Codes:

www.springusa.com

(1) 630-527-8600

Review your dedicated power
requirements. Each range must
operate with the power required on
Page 4.

Range will not turn on. Range is
experiencing temporary voltage
overload or is not on its own,
dedicated circuit.

E3

Remove the cookware from the
range and let the range cool. Make
sure the vents are clear. Verify you
are using induction-ready
cookware. Once the range has
cooled, restart.

The range has overheated.

E2

Clear vents, let range cool down,
then restart. If error message
continues, your range needs to be
serviced.

Range has overheated due to
blocked ventilation and has shut
down the range.

E1

Place an induction ready pan on
the range.

Induction range does not sense
induction-ready cookware has
been placed on the glass surface

E0

SolutionCauseError

4 5

All International Ranges ship with a CEE 7/7 16A plu

g. International
plugs must be changed to match the national standard, based on country
requirement.

Maintaining Your MAX Induction® Range:

Never touch the glass plate immediately after cooking. The surface of the
cooktop may remain hot due to the heat transferred from the cookware.

Do not damage the glass surface of the induction range. If the glass plate is
broken, turn the unit off and unplug it immediately. Call Spring USA at (1)
630-527-8600 for service or warranty. Be sure to have your Model # and
Serial Number available when you contact our office or when completing
the service form on the website.

To clean your MAX Induction® Range, unplug the unit from its power
source. Wipe the unit down with a sponge or cloth with a mild
dishwashing liquid. Dry with a clean, soft cloth.

Do not immerse the induction range directly in water for cleaning – this
will damage the unit.

Remember to clean the vent located on the underside and at the back of the
unit. Inspect the mesh air filter on the underside of the induction range,
each day. If it is soiled, remove the filter and wash it with dish washing
detergent. Dry and replace before operating the induction range.

Keep your induction range away from other ovens or stoves. If the
surrounding temperature is hot, your induction range may stop heating.

Never set items such as metal utensils or keys on top of an induction range,
as the range may sense the metal and begin to heat the object.

Note:

Spring USA is not responsible for poor performance or damage when
ranges are used in conjunction with non-approved materials.

Our Induction ranges have been designed and tested using Spring USA
Professional Cookware and Vessels. Spring USA cannot guarantee the
performance of other Vendors’ equipment being used with our MAX
Induction® Ranges.

As a safety precaution, make sure you have at least 4” of space at the
back of the Induction range. Induction ranges need ventilation to
operate efficiently.

6

How To Operate:

Your MAX Induction® Range is designed to operate in two modes: “Cook”
or “Temp”.

“Cook” Mode offers you high-speed heating, used for sautéing, omelet
stations, pasta bars or demonstration cooking.

“Temp” Mode offers you thermostatically controlled holding temperatures
for use with soups, sauces, buffets or pastry work. The LED display allows
for more accurate temperature selection.

In “Cook” Mode:

 An ‘E0’ code will flash until suitable cookware is placed on the glass

surface of the range.

 The LED panel will display a two-digit number indicating the power

level. Power levels run from 1 thru 20.

 As a safety precaution, if no cookware is placed on

the induction

range plate after 2-1/2 minutes, the unit will shut off.

 Once suitable cookware has been placed on the glass induction plate, the

unit will continue to cook until the range is manually shut down, or the
mode is changed over to “Temp” mode.

Note: As a safety precaution, make sure you have at least 4” of space at
the back of the Induction range. Induction ranges need ventilation to
operate efficiently.

In “Temp” Mode:

 An ‘E0’ code will flash until suitable cookware is placed on the glass

surface of the range.

 The LED panel will display a three-digit number indicating the

temperature setting. To increase the temperature setting, turn the dial
clockwise. To decrease the setting, turn the dial to the counter-clockwise.

 The induction range will continue to warm the food until the set

temperature has been reached. Once the temperature has been reached,
the range will maintain that pre-selected temperature setting.

 Temperature settings in “Temp” mode, in Fahrenheit are:

110°, 120°, 130°, 140°, 150°, 160°, 170°, 180°, 190°, 200°, 220°, 240°,
260°, 280°, 300°, 320°, 340°, 380° & 400°.
Celsius: 43°, 49°, 54°, 60°, 66°, 71°, 77°, 82°, 88°, 93°, 104°, 116°,
127°, 138°, 149°, 160°, 171°, 182°, 193° & 204°.

3