Springtree Spatial
Wash COB RGBW
USER MANUAL AND
INSTALLATION GUIDE
Table of Contents
1. Before You Begin
What is included.......................................................................................................................3
If parts are missing or damaged...............................................................................................3
Safety precautions....................................................................................................................3
2. Product Information
Description................................................................................................................................4
Features....................................................................................................................................4
3. Installation
Power supply.............................................................................................................................5
Mounting....................................................................................................................................5
Rigging......................................................................................................................................5
DMX linking...............................................................................................................................6
4. Operation
Touch buttons...........................................................................................................................6
Operating modes...................................................................................................................6,7
LED display menu.................................................................................................................7,8
5. Maintenance
Cleaning your Spatial Wash COB RGBW................................................................................9
6. Technical Specications
Dimensions...............................................................................................................................9
Troubleshooting.......................................................................................................................10
Contact us...............................................................................................................................10
2
(615) 599-1505 www.springtree.net
Before You Begin
What is included
When you open your package, there should
be two items inside of the box:
1. One Spatial Wash COB RGBW light
2. One Powercon power cord
2.
*If any of these items is damaged or missing,
please contact Springtree Media Group immediately!
1.
Safety precautions
• To reduce the risk of electrical shock or re, do not expose this unit to moisture.
• Be sure that the local power outlet matches that of the required voltage for your unit
• Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt
to remove or break o the ground prong from the electrical cord. This prong is used to
reduce the risk of electrical shock and re in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user serviceable parts inside.
Never plug this unit into a dimmer pack.
• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6”
(15cm) between this device and a wall.
• This xture is intended for indoor use ONLY.
• During long periods of non-use disconnect the unit main power.
• Always mount this unit in a safe and stable matter.
• Keep this manual for as long as you own this product!
(615) 599-1505 www.springtree.net
3
Product Information
Description
The Spatial Wash COB RGBW is a light-weight xture
with 1 120 watt RGBW COB LED (chip on board).
With over 10,000 color combinations, this lamp is
a powerfully bright DMX controllable LED xture
that is perfect for wide stage wash or house lighting.
Multiples of this xture blend beautifully for unbeatable stage lighting that allows you to
switch between a warm white to a cool blue in just the push of a button. This xture is light
weight and can be daisy chained to multiples for power and DMX, for ease of installation.
Features
• 50 degree beam angle
• Professional three pin XLR jacks
• Powercon in and out for simple daisy
chaining of the power (a Powercon power
cord is included)
• Operates in 7 channel DMX mode
• Dual yoke for use as a oor base or traditional
pipe clamp
• Master/slave synchronization
• Color strobe
• LED operation menu with function buttons
• Electronic dimming from 0-100%
• Sound active mode
• DMX-512 protocol
• Daisy chain units together in DMX mode
• CE certication
4
(615) 599-1505 www.springtree.net
Installation
Power Supply
Before plugging your unit in, be sure the source voltage in your area matches the voltage
required for your lighting setup. Because line voltage may vary from venue to venue, you
should be sure your unit voltage matches the wall outlet voltage before attempting to operate
your unit.
* Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk
ofelectrocutionorre.
*To eliminate unnecessary wear and improve its lifespan, during periods of nonuse completely
disconnecttheproductfrompowerviabreakerorbyunpluggingit.
Mounting
The Spatial Wash COB RGBW may be mounted in any position, provided there is adequate
room for ventilation around it. Operating in an insuciently ventilated room can lead to an
overheating of the device and may cause serious accidents. Keep a minimum distance of
0.5m around and above the device. Do not operate this device with the top part of the
housing opened. Before deciding on a location, always make sure that it will be easy to ac-
cess the unit for maintenance and programming purposes. Make sure that the structure onto
which you are mounting this product can support its weight. Please see the Technical Spec-
ications section of this manual for weight information. When mounting this product over
head, always use a safety cable. Mount the xture securely to a rigging point, whether an
elevated platform or a truss.
Rigging
When rigging this product onto a truss, you should use a mounting clamp of appropriate
weight capacity. The bracket has a 13 mm hole, which is appropriate for this purpose.
When power linking multiple xtures, you must always consider the length of the power
linking cable and mount the xtures close enough for the cable to reach them.
The bracket knobs allow for directional adjustment when aiming the xture to the desired
angle. Only loosen or tighten the bracket knobs using your bare hands. Using tools
could damage the knobs. The double bracket yoke/mounting brackets/feet also serve as oor
support(s) or surface mounting.
(615) 599-1505 www.springtree.net
5
Operation
DMX Linking
The Spatial Wash COB RGBW can be connected to a DMX controller using a 3-pin DMX
cable, allowing total control over one or more xtures. To do this, connect a DMX cable from
the DMX-output on your controller to the DMX-input (labeled DMX IN) of the lighting unit.
Connect a second light via its DMX-input to the rst unit’s DMX-output (labeled DMX OUT) to
control and synchronize multiple lighting units at once.
Powercon power cables
DMX IN
DMX IN DMX INDMX OUT DMX OUT
Rear View
Touch buttons
There are four touch buttons on the back of the xture: MENU, UP, DOWN, and ENTER.
Normally the LED will display the current DMX address code of the xture. Press UP and
DOWN to choose the desired function and press ENTER to conrm.
6
(615) 599-1505 www.springtree.net
Operation cont.
0-255 White intensity
Operating modes
The Spatial Wash COB RGBW can operate in seven modes:
• Automode- the unit will automatically chase through all of the dierent colors.
• Master-slavemode- one unit will work as the master and other units in the chain will work in
sychronization towards the master
• Sound-activemode- the unit will react to sound, chasing through the built-in programs
• Strobemode - this function allows various strobing speeds
• DMXcontrolmode- this function will allow you to control each individual unit with a standard
DMX 512 controller
• Staticcolormode - the unit has preset colors that can be cycled for quick color selection
• ColorFade - the unit fades through all colors
LED display menu
Main Menu Value Functions
A001
SL 0
AU00
Sd00
FA00
F 00
St00
r000
g000
b000
U000
001-512 DMX address
0-3 Slave
0-99 Auto
0-99 Sound active
0-99 Color fade
0-14 Static color
0-99 Strobe
0-255 Red intensity
0-255 Green intensity
0-255 Blue intensity
(615) 599-1505 www.springtree.net
7
DMX Traits
Function
Macro funtions
Channel Value
1 R Red intensity 0-255
2 G Green intensity 0-255
3 B Blue intensity 0-255
4 W White intensity 0-255
5 Dimmer Dimmer Off/On 0-255
6 Strobe Slow to Fast 0-255
7 Macro Various (see below) 0-255
8
0-10
10-129
130-249
250-255
Nothing
Cycle through colors, increasing speed
Cycle through colors with fade in / fade out, increasing speed
Nothing
(615) 599-1505 www.springtree.net
Maintenance
Cleaning your Spatial Wash COB RGBW
Due to fog residue, smoke, and dust, cleaning the internal and external optical lenses must
be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe o the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
*Cleaning frequency depends on the environment in which
theunitoperates(i.e.smoke,fogresidue,dust,dew).
TechnicalSpecications
Dimensions:
Weight: 8 lbs
(615) 599-1505 www.springtree.net
9
Troubleshooting
Listed below are a few common problems that you may encounter
when using this product:
UnitnotrespondingtoDMX:
1. Check that the DMX cables are
connected properly and are
wired correctly. DMXoutputDMXinput
2. Check that all cables are connected to the right connectors; it does matter
which way the inputs and outputs are connected.
Unitdoesnotrespondtosound:
1. Quiet or high pitched sounds will not activate the unit. If problems are not
resolved, contact your dealer for service.
Contact us
Springtree Media Group would like to thank you for choosing our company for
your lighting needs! If you have any questions or concerns, please contact us.
Ocehours:
Monday-Friday, 8:30
AM to 5:00 PM CT
Telephone:
(615) 599-1505
E-mail:
sales@springtree.net
Website:
www.springtree.net
10
(615) 599-1505 www.springtree.net
Loading...