SPRI Push-Up Bars Assembly Instructions Manual

Push-Up Bars
Assembly Instructions
Step 1:
Each Push-Up Bars consists of (1) curved hand bar, (2) straight legs, and (2) hand screws.
Step 2:
Insert (1) leg into each end of hand bar and align screw holes.
NOTE! Legs are positioned perpendicular to hand bar.
Step 3:
Insert (1) hand screw into each of the screw holes located at the lower, inside portion of each side of the bar and hand tighten.
Step 4:
Before each exercise session, grasp top of each Push-Up Bars and apply direct downward pressure. Tighten hand screws if any bar instability is noted.
Consult your physician before beginning any type of exercise program.
Push Up Bar_IS_R2.indd 1 8/17/11 11:42 AM
Call our toll-free number or visit our website
for more information on SPRI products
or to receive your SPRI catalog.
SPRI Products
1769 Northwind Blvd. Libertyville, IL 60048
800-222-7774 – www.spri.com
The leading manufacturer and distributor of health, tness and wellness exercise products
SPRI Products, Inc. Libertyville, Illinois 60048
SPRI is a registered trademark of SPRI Products, Inc. ©2011 SPRI Products PL-PUB-C / v.2009
SPRI (A Gaiam Company) assumes no liability or responsibility for accidents or injury to person or property that may result from the improper use of this product. Be sure to consult your health professional before beginning these exercises or any type of exercise program.
Push-Up Bars
Assembly Instructions
Push Up Bar_IS_R2.indd 2 8/17/11 11:42 AM
Loading...