Sprayon S00351000 User Manual

MR™351 Mold Cleaner Aerosol

Not available.
Aerosol.

US / Canada: [phone]
Mexico: SETIQ 01-800-00-214-00 / (52) 55-5559-1588 24 hours / 365 days a year

SAFETY DATA SHEET

Product name

Other means of
identification

Product type

Emergency telephone
number of the company

Section 1. Identification

:

:
:

:

Manufacturer

:

Sprayon Products Group
101 W. Prospect Avenue,
Cleveland, Ohio 44115

Relevant identified uses of the substance or mixture and uses advised against

Paint or paint related material.

S00351000

S00351000

Product code

:

Product Information
Telephone Number

:

US / Canada: [phone]
Mexico: Not Available

Regulatory Information
Telephone Number

:

US / Canada: [phone]
Mexico: Not Available

Transportation Emergency
Telephone Number

:

US / Canada: [phone]
Mexico: SETIQ 01-800-00-214-00 / (52) 55-5559-1588 24 hours / 365 days a year

Section 2. Hazards identification

GASES UNDER PRESSURE - Compressed gas
SKIN CORROSION/IRRITATION - Category 2
SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2A
GERM CELL MUTAGENICITY - Category 2
CARCINOGENICITY - Category 1A
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract
irritation) - Category 3
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Narcotic effects) ­Category 3
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 1

Classification of the
substance or mixture

:

GHS label elements

Percentage of the mixture consisting of ingredient(s) of unknown acute oral toxicity:

4.9%
Percentage of the mixture consisting of ingredient(s) of unknown acute dermal toxicity:

29.9%
Percentage of the mixture consisting of ingredient(s) of unknown acute inhalation
toxicity: 29.9%

OSHA/HCS status

:

This material is considered hazardous by the OSHA Hazard Communication Standard
(29 CFR 1910.1200).

Date of issue/Date of revision

:

12/20/2019

Date of previous issue

:

11/30/2019

Version

:

7.01

1/16

S00351000

MR™351 Mold Cleaner Aerosol

SHW-85-NA-GHS-US

Section 2. Hazards identification

Signal word

:

Danger

Hazard pictograms

:

Precautionary statements

Prevention

:

Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Wear protective gloves. Wear eye or face protection.
Wear protective clothing. Use only outdoors or in a well-ventilated area. Do not breathe
dust or mist. Do not eat, drink or smoke when using this product. Wash hands
thoroughly after handling.

Response

:

Get medical attention if you feel unwell. IF exposed or concerned: Get medical
attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Call a POISON CENTER or physician if you feel unwell. IF ON SKIN: Wash with plenty
of soap and water. Take off contaminated clothing and wash it before reuse. If skin
irritation occurs: Get medical attention. IF IN EYES: Rinse cautiously with water for
several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If
eye irritation persists: Get medical attention.

Storage

:

Store locked up. Protect from sunlight. Store in a well-ventilated place.

Disposal

Dispose of contents and container in accordance with all local, regional, national and
international regulations.

This product contains a Significant New Use Rule (SNUR) Chemical. Do not allow this
product to enter drains, sewers, wastewater treatment systems, groundwater, streams,
lakes or ponds. See Environmental Data Sheet (EDS) for additional details.

Hazards not otherwise
classified

:

None known.

Contains gas under pressure; may explode if heated.
Causes serious eye irritation.
Causes skin irritation.
May cause cancer.
Suspected of causing genetic defects.
May cause respiratory irritation.
May cause drowsiness or dizziness.
Causes damage to organs through prolonged or repeated exposure.

:

Hazard statements

Please refer to the SDS for additional information. Keep out of reach of children. Keep
upright in a cool, dry place. Do not discard empty can in trash compactor.

Supplemental label
elements

DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which
can cause permanent brain and nervous system damage. Intentional misuse by
deliberately concentrating and inhaling the contents can be harmful or fatal. WARNING:
This product contains chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm. FOR INDUSTRIAL USE ONLY.

:

Section 3. Composition/information on ingredients

Other means of
identification

:

Not available.

Substance/mixture

CAS number/other identifiers

:

Mixture

Date of issue/Date of revision

:

12/20/2019

Date of previous issue

:

11/30/2019

Version

:

7.01

2/16

S00351000

MR™351 Mold Cleaner Aerosol

SHW-85-NA-GHS-US

Section 3. Composition/information on ingredients

Trichloroethylene

≥50 - ≤75

79-01-6

Tetrachloroethylene

≥10 - ≤25

127-18-4

Carbon Dioxide

≤3

124-38-9

Mineral Spirits 140-Flash

≤3

64742-88-7

Heavy Paraffinic Oil

≤1

64742-65-0

Ingredient name

CAS number

% by weight

There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health and hence require reporting in this section.

Occupational exposure limits, if available, are listed in Section 8.

Any concentration shown as a range is to protect confidentiality or is due to batch variation.

Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and
keep at rest in a position comfortable for breathing. If material has been swallowed and
the exposed person is conscious, give small quantities of water to drink. Stop if the
exposed person feels sick as vomiting may be dangerous. Do not induce vomiting
unless directed to do so by medical personnel. If vomiting occurs, the head should be
kept low so that vomit does not enter the lungs. Get medical attention. If necessary,
call a poison center or physician. Never give anything by mouth to an unconscious
person. If unconscious, place in recovery position and get medical attention
immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt
or waistband.

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention.

Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Wash contaminated clothing thoroughly with water before removing it, or wear
gloves. Continue to rinse for at least 10 minutes. Get medical attention. Wash clothing
before reuse. Clean shoes thoroughly before reuse.

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it
is suspected that fumes are still present, the rescuer should wear an appropriate mask
or self-contained breathing apparatus. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Get medical attention. If necessary, call a poison center or physician. If unconscious,
place in recovery position and get medical attention immediately. Maintain an open
airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case of
inhalation of decomposition products in a fire, symptoms may be delayed. The exposed
person may need to be kept under medical surveillance for 48 hours.

Section 4. First aid measures

Eye contact

Skin contact

Inhalation

Ingestion

:

:

:

:

Description of necessary first aid measures

Most important symptoms/effects, acute and delayed

Inhalation

:

Can cause central nervous system (CNS) depression. May cause drowsiness or
dizziness. May cause respiratory irritation.

Can cause central nervous system (CNS) depression.

:

Ingestion

Skin contact

:

Causes skin irritation.

Causes serious eye irritation.

:

Eye contact

Over-exposure signs/symptoms

Potential acute health effects

Date of issue/Date of revision

:

12/20/2019

Date of previous issue

:

11/30/2019

Version

:

7.01

3/16

S00351000

MR™351 Mold Cleaner Aerosol

SHW-85-NA-GHS-US

Section 4. First aid measures

Protection of first-aiders

:

No action shall be taken involving any personal risk or without suitable training. If it is
suspected that fumes are still present, the rescuer should wear an appropriate mask or
self-contained breathing apparatus. It may be dangerous to the person providing aid to
give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water
before removing it, or wear gloves.

Notes to physician

:

In case of inhalation of decomposition products in a fire, symptoms may be delayed.
The exposed person may need to be kept under medical surveillance for 48 hours.

Specific treatments

:

No specific treatment.

Skin contact

Ingestion

Inhalation

Adverse symptoms may include the following:
respiratory tract irritation
coughing
nausea or vomiting
headache
drowsiness/fatigue
dizziness/vertigo
unconsciousness

No specific data.

Adverse symptoms may include the following:
irritation
redness

:

:

:

Eye contact

:

Adverse symptoms may include the following:
pain or irritation
watering
redness

See toxicological information (Section 11)

Indication of immediate medical attention and special treatment needed, if necessary

Section 5. Fire-fighting measures

Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.

Hazardous thermal
decomposition products

Specific hazards arising
from the chemical

Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
halogenated compounds
carbonyl halides

In a fire or if heated, a pressure increase will occur and the container may burst.
Bursting aerosol containers may be propelled from a fire at high speed.

Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Special protective
equipment for fire-fighters

Use an extinguishing agent suitable for the surrounding fire.

Extinguishing media

:

:

:

None known.

Suitable extinguishing
media

:

Unsuitable extinguishing
media

:

Special protective actions
for fire-fighters

:

Date of issue/Date of revision

:

12/20/2019

Date of previous issue

:

11/30/2019

Version

:

7.01

4/16

S00351000

MR™351 Mold Cleaner Aerosol

SHW-85-NA-GHS-US

Section 6. Accidental release measures

Environmental precautions

Personal precautions, protective equipment and emergency procedures

Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash
spillages into an effluent treatment plant or proceed as follows. Contain and collect
spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or
diatomaceous earth and place in container for disposal according to local regulations
(see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated
absorbent material may pose the same hazard as the spilled product. Note: see
Section 1 for emergency contact information and Section 13 for waste disposal.

:

:

No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. In the case of aerosols being ruptured, care should be taken due to the rapid
escape of the pressurized contents and propellant. If a large number of containers are
ruptured, treat as a bulk material spillage according to the instructions in the clean-up
section. Do not touch or walk through spilled material. Avoid breathing vapor or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).

Large spill

:

Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of via a licensed waste
disposal contractor.

Small spill

:

Methods and materials for containment and cleaning up

For non-emergency
personnel

For emergency responders

:

If specialized clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For non­emergency personnel".

This product contains a Significant New Use Rule (SNUR) Chemical. Do not allow
this product to enter drains, sewers, wastewater treatment systems, groundwater,
streams, lakes or ponds. See Environmental Data Sheet (EDS) for additional
details.

Section 7. Handling and storage

Advice on general
occupational hygiene

Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.

:

Protective measures

Put on appropriate personal protective equipment (see Section 8). Pressurized
container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do
not pierce or burn, even after use. Avoid exposure - obtain special instructions before
use. Do not handle until all safety precautions have been read and understood. Do not
get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Avoid
breathing gas. Use only with adequate ventilation. Wear appropriate respirator when
ventilation is inadequate. Empty containers retain product residue and can be
hazardous.

:

Precautions for safe handling

Date of issue/Date of revision

:

12/20/2019

Date of previous issue

:

11/30/2019

Version

:

7.01

5/16

S00351000

MR™351 Mold Cleaner Aerosol

SHW-85-NA-GHS-US