SpotOn PT-100, PT-60, PT-200 Product Manual

Product Manual

Features:

6 Measure nozzle supply pressure without shutting down
6 Easy handheld operation
6 Works with sprayer and irrigation nozzles

Innoquest, Inc.

910 Hobe Road
Woodstock, IL 60098
Phone: [phone]

www.SpotOnProducts.com

SpotOn Pressure Tester

Model: PT-60 Item # 26970
Model: PT-100 Item # 26620
Model: PT-200 Item # 26630

Specifications:

- Range: PT-60 Î 0-60 psi (0-4 Bar)
PT-100 Î 0-100 psi (0-7 Bar)
PT-200 Î 0-200 psi (0-14 Bar)

- Accuracy: +/- 2.5%

- Temp Range: 32 to 150*F (0 to 65*C)

- Size: 2.2” Dia.(5.6cm) x 5.0” Long(12.7cm)

- Weight: 0.4 lbs (180g)

- Made in USA

Taking a Measurement:

1. Remove needle from storage compartment and install on

white fitting with gentle twisting motion.

2. Insert needle into nozzle’s orifice - usually done while nozzle

is running. (Shown dry here for clarity of picture)

3. Fully insert needle inside nozzle to accurately measure

pressure supply to nozzle. Note: Air Induction nozzles will
require inserting the needle inside the primary orifice fully for
accurate pressure readings. This may require use of the extra
long needle. The bent needle is designed for use with irrigation
nozzles. (see next page for needle selection)

4. Read the pressure from the gauge. It may take a second or

two to reach full pressure due to the small diameter of the
needle.

Needle Selection:

Standard Needle Extra Long Needle

Bent Needle for Irrigation
Pitot Tube Method

Warranty:

This product is warranted to be free
from defects in materials or
workmanship for one (1) year from
the date of purchase.

Repair & Service Policy:

Product returned to Innoquest for repair or service must follow the
guidelines set forth as follows: Return of the product for warranty or service
repair will be the responsibility of the purchaser (Innoquest does not pay
inbound shipping charges). All returns must receive an RMA number by
calling Innoquest prior to return of the product. The RMA number must be
clearly marked on the outside of the shipping carton. Innoquest has the
option to repair, replace, or credit the customer for a warranty return. If the
customer is returning product for non-warranty related repair or service, a
minimum charge will apply for accessing the product’s repair needs and
further work will not be completed without the customer’s approval.

Innoquest, Inc. Toll Free: 800-637-1623
910 Hobe Road Phone: [phone]
Woodstock, IL 60098 Fax: [phone]
www.SpotOnProducts.com [e-mail]

© 2012 Innoquest, Inc. USA P/N 27360 Rev. 0