Sport-thieme 11 109 9212, PRO Operating Instructions Manual

The Sport-Thieme „Pro“ ball inflator is an essential equipment for all ball sports. It can be used also for air mattresses, car valves,
wheelchair tyres or camping gear – a real all-rounder! The inflator is ecient and oil-free. Includes needle valve and
2 plastic valve adapters.

Sport-Thieme GmbH · 38367 Grasleben · www.sport-thieme.de
Tel. [phone] · Fax [phone] · [e-mail]

Art.-Nr. 11 109 9212

0316705 · © 2016 Sport-Thieme GmbH

‘Pro’ ball inflator

Operating instructions

School Sports · Club Sports · Fitness · Therapy

2

Caution!

Read the manual and instructions carefully for safe operation.
These instructions come with the device. Keep this manual in a safe place.

Important!

Read the operating instructions before use. Keep these instructions for future reference.

General safety advice

1. Keep work space clean

Untidy areas or workbenches can lead to injuries.

2. Check the work space surroundings carefully

Keep electrical tools out of the rain. Do not use electrical tools in moist or wet areas. Ensure that the workspace is well illu­minated. Do not use tools near flammable liquids or gases. Motors in these tools usually generate sparks which could ignite
fumes.

3. Precautions against electric shock

Avoid contact with earthed surfaces such as pipes, radiators, cookers, refrigerators.

4. Keep other people away

Do not let other people, particularly children, who are not involved in the work, touch the tool or the extension cord and keep
these people away from the workspace.

5. Store tools that are not in use

Tools should be stored in a dry and lockable place where children cannot reach them.

6. Do not use beyond intended speed

The device will do the work better and safer when it is operated at the intended speed.

7. Do not put too much strain on the cable

Do not carry the tool by the cable and do not pull the cable to remove the plug from the socket. Keep the cable away from
heat, oil and sharp edges.

8. Maintain tools properly

Check the tool’s cable regularly and let an authorised customer service organisation carry out repairs in case of any damage.
Check extension cords regularly and replace if damaged. Keep handles dry, clean and free of oil and grease.

9. Avoid unintentional starting

Do not carry the tool with a nger on the button when the tool is plugged in. Ensure that the tool is switched o when you
plug it in.

10. Stay alert

Pay attention to what you are doing. Use common sense. Do not operate the tool when you are tired.

11. Stand securely

Stand securely and keep your balance at all times.

12. Check damaged parts

Before you continue to use the tool, check damaged parts carefully in order to establish whether the tool is working properly
and fullling its intended function. Check the alignment, connections and mounting of moveable parts. Check for broken parts
and any other conditions that might influence the tool’s operation. A damaged protective cover or other parts should be pro­perly repaired or replaced by an authorised customer service organisation unless stated otherwise in these operating instruc­tions. Malfunctioning switches should be repaired by an authorised customer service organisation. Do not use the tool if you
cannot switch it on and o using the switch.

Operating instructions for art.-nr. 11 109 9212

School Sports · Club Sports · Fitness · Therapy