Sport-thieme 247 1600, 247 1613 Assembly Instructions Manual

Sport-Thieme® „Professional“
Aluminium Mini Training Goal

Art.-Nr.: 247 1600

247 1613

Assembly instructions

0218214 · © 2018 Sport-Thieme GmbH

D-38367 Grasleben · Germany
sport-thieme.com · info @sport-thieme.com
Phone: [phone] · Fax: [phone]

2

Assembly instructions for Art.-Nr. 247 1600/247 1613

As this goal is completely welded only the net needs to be mounted
at the goal (see point 2).

1. Scope of delivery

Please check the following content before assembly.
1x Completely welded goal
1x Net
1x Accessories:

- 28 x safety system net holder

- 2 x plastic stopper Ø 28mm

- 1 x assembly instruction

2. Assembly of the net

a) At rst x net holders at the net rope. Bend open net holders a little and press rope into the holders. We recommend the follo-

wing distribution of net holders:
Crossbar/ground tube : 6 pieces each
Upright : 4 pieces each
Ground bar : 4 pieces each
b) After having mounted all net holders x net at the goal construction. Stick net holders in the net hook rail and x them with a

90 degrees’ rotation. If necessary use a thin screw driver.
c) Dismantling of the net is also done by rotation of the net holders through 90 degrees. If necessary use a thin screw driver.

3. Ground xing

The ground bars are equipped with boreholes of 25 mm which serve to x the special anchoring systems for the goal. Dierent
systems are available (see Sport-Thieme accessories).
The anchoring system is not part of the delivery. The use of the goal without corresponding anchoring system is at your own risk.
If you do not use any anchoring system close both boreholes with the supplied caps for safety reasons. Use a mallet if necessary.

4. Maintenance, safety and storage instructions

This goal is constructed only for soccer matches and not for other purposes. Check all screwed
fastenings before use and repeat it from time to time. It has to protected against overturning at
any time.

Do not climb net or goal frame. It is not allowed to x additional parts or extensions at the goal
frame which may impair the safety of the goal (according to DIN EN 16579).

To avoid damage and misuse goals have to be stored secured and in an upright position when not in use.

Only use water for cleaning the surfaces. Do not use alcohol or any aggressive chemicals!