SPORTSPOWER M7TEJ Assembly Instruction Manual

APPROXIMATE ASSEMBLY TIME 2 PERSON ASSEMBLY REQUIRED ASSEMBLY SPACE

90 minutes

REQUIRED ASSEMBLY TOOLS

ASSEMBLED DIMENSIONS

FLOOR AREA

4M X 3M X 3M

WEIGHT 27 KG, BUILD IN LOCATION

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

DESCRIPTION

M7TEJ
MULTIPLAY

WITH SWINGS, GLIDER,

SLIDE & BASKETBALL NET

3100mm

2150mm

1900mm

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

DESCRIPTION

M7TEJ
MULTIPLAY

WITH SWINGS, GLIDER,

SLIDE & BASKETBALL NET

PAGE 2 OF 25

•

•

•

•

•

•

•

•

•

We suggest you spend some time reading this guide before following
the simple step-by-step assembly instructions.

Do not discard any of the packaging until you have checked that
you have all parts and fittings listed. When discarding packaging
take care and consideration for others and the environment.

When assembling this equipment be aware of the safety of yourself
and others.

Because of the size of this multiplay we suggest that you assemble
it in the area intended for use.

Some of the assembly will be easier with two people. Seek assistance
when lifting large or heavy items.

Assemble this multiplay on a clean, flat and level surface e.g. the
cardboard packaging.

Keep any tools provided or spare fittings for future use. Only use
the tools specified.

Assemble all parts loosely, by hand, before tightening any bolts or

fixings.

we would suggest storing your multiplay inside or under a suitable
cover during winter to help protect against damage and maintain its
aesthetic appearance. For details of how to maintain your playset,
please refer to “maintenance section”.

BEFORE STARTING ASSEMBLY, PLEASE CHECK ALL PARTS ARE
INCLUDED. IF ANY PARTS ARE MISSING PLEASE CONTACT THE
HELPLINE ON ([phone].

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

DESCRIPTION

M7TEJ
MULTIPLAY

WITH SWINGS, GLIDER,

SLIDE & BASKETBALL NET

PAGE 3 OF 25

• WARNING! Not suitable for children under 36 months. Small parts/long cord­Strangulation Hazard.

• This unit is designed to be used by up to 5 children between ages 3 to 8.

Maximum weight of 45kg each, simultaneously not to exceed a combined

weight of 225kg.

• Adult supervision is required at all times. Never leave children unattended.

• WARNING！Only for outdoor use.

• WARNING！Only for domestic use.

• Teach children to sit in the centre of the swing play items, with their full weight
in the centre of the seats. DO NOT allow children to lean to the side when on
play items or to collide with other playmates. DO NOT allow children to stand
on the swing seat and slide.

• Dress children appropriately while on and around this equipment. DO NOT

• DO NOT allow children to slide down the slide head first.

allow children to wear ponchos, scarves, jewelry, loose shoes, jackets or
clothing with loose strings and/or

clothing that might be potentially hazardous

whilst using this equipment.

• DO NOT let children use this equipment in any manner other than intended.

• DO NOT install over concrete, asphalt, gravel or any other hard surface which
may cause injury should a fall occur. Swing set shall be placed over protective
soft material such as sand bed, soft woodlark, and grass lawn. The depth of
sand and soft woodlark shall be a minimum of 6 inches.

• The anchor shall be placed level with or under the ground in order to reduce
tipping hazards.

• DO NOT let children use this equipment until it has been properly assembled
and anchored. Place equipment on level ground not

less than 2M from any
structures or obstacles such as fences, overhanging branches,
laundry or electrical lines, garages, sheds or houses.

• Do not allow children to swing empty play items as they may strike
other children or bounce back off the frame and strike the child.

• Instruct children not to walk closely in front of, behind or in
between moving play equipment. Instruct children to keep a safe
distance away to avoid being struck by the items in use.

• Instruct children not to twist chains or ropes, or loop them over
the support bar. This adds stress, reduces strength and may result
in failure and cause injury.

• Instruct children not to get off play equipment whilst in motion.
DO NOT allow children to jump from moving play equipment.

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

DESCRIPTION

M7TEJ
MULTIPLAY

WITH SWINGS, GLIDER,

SLIDE & BASKETBALL NET

PAGE 4 OF 25

•

DO NOT allow children to climb or play on the equipment whilst
wet (slips or falls may occur).

•

DO NOT allow child ren to climb on or swing f rom structural mem­bers (e.g. legs, top bar, basketball hoop,etc.) These are structural .
components ONLY and NOT play features.

•

DO NOT allow children to swing play equipment more than 60
degrees.

•

After completion of assembly, ensure all bolts and nuts are tightened
and in the correct position.

•

DO NOT attach items to the playground equipment that are not
specifically designed for use with this equipment, such as, but not
limited to, jump ropes, clotheslines, pet leashes, cables and chains
as they may cause strangulation hazards.

•

At the end of each play season, remove all plastic parts and take
indoors. DO NOT allow the use of plastic items when the tempera­ture drops below 0 degrees.

•

Dispose of all packaging properly after the unit has been assembled

• Please retain the assembly manual for future reference and review

•

Do not orientate the slide towards the sun, this may lead to a child

becoming dizzy/disorientated through extended use.

•

This product cannot be modified.

each season.

MAINTENANCE

•

Check all nuts and bolts for tightness and tighten when required.

• Check swing seats, chains, and other means of attachments for

evidence of deterioration, replace when required in accordance
with the manufacturer’s instructions.

•

This unit must be assembled by adults, ensure bolts and small
components are kept out of reach of young children.

•

Check all fixings regularly, tighten if necessary, and that the

suspension system is secure.

•

Check metal sections or components for signs of corrosion.

•

Discontinue use if weakening or breakage found.

•

Young children in play are unaware of potential dangers and
hazards, therefore responsible adults supervision is essential.

•

Failure to comply with these precautions may result in injury
Disassemble and store indoors during the winter.

•

Not suitable for hiring or commercial use.

•

Never use the equipment in any manner other than intended.

ASSEMBLY
INSTRUCTION

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

DESCRIPTION

M7TEJ
MULTIPLAY

WITH SWINGS, GLIDER,

SLIDE & BASKETBALL NET

PAGE 5 OF 25

•

Shredded bark mulch, wood chips, fine sand or fine gravel are

considered to be acceptable shock-absorbing surfaces when

installed and maintained at a sufficient depth under and around

playground equipment. However each material is only effective
when properly maintained. Material should be checked periodical ­ly and replenished to maintain correct depth as determined neces­sary for your equipment. Otherwise serious injuries may occur
from a fall.

•

Toys shall be accompanied by maintenance instructions drawing
attention to the need of carrying out checks and maintenance of
the main parts at regular intervals; if these checks are not carried
out the toy c

ould ove

rturn and otherwise become a hazard. Whenever

practical, the instructions shall also be affixed to the toy.

•

Please retain thes

e ins

tructions for future reference.

TIGHTENING NUTS & BOLTS

•

At the start of assembly DO NOT tighten nuts or bolts fully, so
as to allow some possible adjustment for ease of assembly.

•

After all major components are assembled, go back over all bolts
and nuts and properly tighten all of them before using this product.

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

DESCRIPTION

M7TEJ
MULTIPLAY

WITH SWINGS, GLIDER,

SLIDE & BASKETBALL NET

PAGE 6 OF 25

1 X1 2 X1 3 X1

4 X1 5 X4 6 X4

7 X1 8 X1 9 X2

10 X2 11 X2 12 X2

13 X2 14 X2 15 X2

16 X4 17 X4 18 X2

19 X2 20 X1 21 X1

22 X1 23 X4

Plastic Cap Long Plastic Sleeve

Footrest

Swing Seat

Cross Bar Glide Top Tube

Upper Leg

Lower Leg

Top Left Beam Upper Tube

Glide Seat Tube Glide Lower Tube

Basketball Board

Basketball Net

Top Right Beam

Bracket

Cross Bar – With Two Holes
For Connecting Slide

Plastic Connector

Glide Seat

Plastic Connector

Short Plastic Tube

Basketball Hoop

Anchor

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

DESCRIPTION

M7TEJ
MULTIPLAY

WITH SWINGS, GLIDER,

SLIDE & BASKETBALL NET

PAGE 7 OF 25

A X10 B X4 C X4

D X2

G X2

J X12 K X12

M X8 N X26

P X1 Q X1

V X1

H X2

E X2 F X4

6mm

M8×50mm M8×54mm M8×114mm

M8×95mm M8×20mm M6×36mm

M6×60mm M6×36mm

x mm M8

S X4

M5

T X8

6 12mm

I X40

L X26

x

mm

O X8

M6

R X4

M5×15mm

U X1

4mm

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

DESCRIPTION

M7TEJ
MULTIPLAY

WITH SWINGS, GLIDER,

SLIDE & BASKETBALL NET

PAGE 8 OF 25

H2

Part list for slide

H4

H7

H9

X1

H6

H13

M6 X 25mm

H14

M6

6.5 X 13mm

H16

X6

H17

H12

H5

Connecting Part Connecting Plate

Slide(Right Part)

H3

Slide(Middle Part)

H7A

Slide Support (Left Part)

H8

Slide Ladder Steps

H1 X1

X2

X1

X2

X16

X4

X8

X6

H15

X14

X8

X1 X2

X1 X1

X2

H10

M6 X 9mm

6.5 X 13mm 6.5 X 10mm

Slide(Left Part)

Slide Support Tube

Slide Support (Right Part)

Leg Tube And Slide Connector

M6 X 30mm

X16

H18

8.5 X 19mm

X4

H11

M6 X 14mm

VIEW PRODUCT VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT