SPORTSPOWER M7TEG Assembly Instruction Manual

1600mm

3300mm

1830mm

DESCRIPTION
M7TEG

DOME CLIMBER & SLIDER

APPROXIMATE ASSEMBLY TIME 2 PERSON ASSEMBLY REQUIRED ASSEMBLY SPACE

90 minutes

REQUIRED ASSEMBLY TOOLS

ASSEMBLED DIMENSIONS

FLOOR AREA

4M X 2M X 2M

WEIGHT 27 KG, BUILD IN LOCATION

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

PART LIST

NO.

QTY

(1) Base Curved Tube 3

(2) Base Curved Tube 1

(3) Side Support Tube 1

(4) Side Support Tube 1

(5) Side Support Tube 3

(6) Saucer Curved Tube 2

(7) Saucer Curved Tube 1

(8) Saucer Curved Tube 1

(9) Top Curved Tube 4

1(10) Ladder Stepper

1(11) Ladder Stepper

2(12) Support Tube

PAGE 2 OF 23 PAGE 3 OF 23 PAGE 4 OF 23 PAGE 5 OF 23 PAGE 6 OF 23

DESCRIPTION

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

M7TEG

DOME CLIMBER & SLIDER

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

PART LIST

NO.

QTY

1

1

1

1

Handle Arch

Handle Arch

(13)

(14)

Slide Support(15)

Connecting Tube(16)

1Protection Board(17)

2Triangle Brace(18)

1Fabric Saucer(19)

1Slide(20)

1

1

8

Small Netting(21)

Large Netting(22)

Cord(23)

4Anchor(24)

DESCRIPTION

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

M7TEG

DOME CLIMBER & SLIDER

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

HARDWARE LIST

1cm

2cm

3cm

4cm

5cm

6cm

7cm

8cm

9cm

10cm

0cm

B

BOLT

X11

M6×35mm

C

BOLT

X20

M6×38mm

D

BOLT

X3

M6×60mm

A

BOLT

M6×15mm

X2

BOLT

E

M6×126mm

X2

BOLT

M8×65mm

F

X4

L

NUT

M6

X36

NUT

M

M8

X4

I

X40

Φ6.5xΦ10mm

SPRING

WASHER

J

X4

Φ8.5xΦ13.5mm

SPRING

WASHER

K

X12

Φ6.5xΦ14mm

FLAT

WASHER

G

X62

Φ6.5xΦ14mm

ARC

WASHER

H

X8

Φ8.5xΦ19mm

ARC

WASHER

1cm

2cm

3cm

0cm

For faulty or missing parts please contact customer services: call ([phone],

Email [e-mail] or visit www.sportspowerfit4kids.com

DESCRIPTION

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

M7TEG

DOME CLIMBER & SLIDER

VIEW PRODUCT VIEW PRODUCT VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT VIEW PRODUCT

VIEW PRODUCT

HARDWARE LIST

1cm

2cm

3cm

4cm

5cm

6cm

7cm

8cm

9cm

10cm

0cm

Y

ALLEN KEY

X1

M6

Z

ALLEN KEY

X1

M8

X

SPANNER

X1

For faulty or missing parts please contact customer services: call ([phone],

Email [e-mail] or visit www.sportspowerfit4kids.com

DESCRIPTION

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

M7TEG

DOME CLIMBER & SLIDER

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

1. Please check that all parts are present before you start the assembly of your unit, as once
assembled,the unit is exempt from our home approval policy.

2. For ease and speed of assembly,we recommend that before you commence each step of assembly,
you should identify all the parts required for that step.

3. For large items. please ensure that you have sufficient space and people (as indicated on page 1) to
assemble your product safety.

4. During assembly please take care not to over-tighten any fittings, as this may damage the product.

5. Please retain these instructions for future reference.

Top Tips before you start

WARNINGS

● This unit is for domestic family use only and intended for outdoor use.

● Warning! Choking hazard - This item is not suitable for children under 3 years due to small parts.

● This unit is intended for children 3-8 years. Maximum weight of 45kg each, simultaneously not to
exceed a combined weight of 180kg.

● Slide is to be used by only one child at a time.

● For use under adult supervision.

● Do not orientate the slide towards the sun, this may lead to a child becoming dizzy/disorientated
through extended use.

● Do not allow children to climb on the side bars of the slide as this could lead to injury.

● This slide is designed for a child to slide down in a seated upright position. Do not encourage
children to go down lying flat on their fronts or backs as this may lead to injury.

● The unit is to be assembled/ used on a flat surface; use on concrete, asphalt or other hard surfaces
is not recommended.

● The unit is to be situated at least with a 2m clearance away from fences, walls, out buildings, over
hanging branches, laundry lines etc.

● Do not allow children to wander in front of the slide chute during use as this may result in injury.

● Packaging materials are not toys. Please remove all packaging and packing materials before
letting chidren use this unit.

● For safety reasons, this unit MUST be anchored into the ground.

● Archors shall be placed level with or under the ground in order to reduce the risk of tripping.

● Constant adult supervision required

● Do not allow children to wrestle or play rough when on the climber to prevent injuries from falling

● Make sure the nets are fastened securely before allowing children to use.

● Check to ensure there are no broken or loose netting before each use.

● Do not allow children, pets, or any other obstacles beneath the climber to prevent product or
personal damages.

ASSEMBLY

● Adult assembly required.

● Warning! Choking hazard - This item is not suitable for children under 3 years due to small
parts. Care should be taken to ensure small children do not have access to parts when
assembling.

● Please follow instruction for assembly given and keep for future reference. Failure to
assemble and maintain this item as instructed may result in injury.

DESCRIPTION

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

M7TEG

DOME CLIMBER & SLIDER

TIGHTENING NUTS&BOLTS

MAINTENANCE

● Do not over-tighten the nuts and bolts when you are assembling this equipment, this is to
allow for some possible adjustments and ease of installation.

● Once you have finished the assembly of the equipment, go back over all of the nuts and
bolts and properly tighten all of them before using the equipment.

Make sure that you have all parts listed. If you are missing any parts, please
telephone [phone] for assistance.

● Regularly check this unit for signs of damage or wear. If any damage is visible do not use
until this has been rectified.

● Maintenance must be carried out by a responsible adult.

● Check all nuts and bolts twice monthly during the usage season for tightness and tighten as
required. It is particularly important that the procedure be followed at the beginning of each
season.

● Never use pliers to tighten up screws - these can cause damage to paintwork increasing a
risk of rust damage.

● Tighten all nuts and bolts securely. Replace as needed. If not checked regularly, bolts can
be loose or missed and components can become detached causing injury.

● Check the unit at the beginning of the usage season and monthly thereafter for evidence of
damage/deterioration. Immediately remove and replace any items that appear weak or
broken.

● Check all covers designed for bolts and sharp edges regularly to be certain they are
present and in good condition. Replace as needed. It is particularly important that all covers
are checked prior to the first use in each season.

● Inspect metal parts and hardware for proper closure and for signs of wear, deterioration and
rust damage. Replace as needed.

● Lubricate all metal and moving parts regularly.

● Remove plastic slide section and store indoors during periods of inclement weather and
when temperature drops below 32 degrees Fahrenheit/0 degrees Celsius.

● It is important to check and maintain the main parts at regular intervals. If these checks are
not carried out, this unit could overturn or pose an injury hazard.

● This product cannot be modified.

● It is recommended to leave all fittings finger tight until assembly is complete, for ease of
construction, and then tighten firmly.

● Once assembly is completed, carefully check the slide before use. If you find any problems,
do not allow children to use the slide until it is fit for use.

● Warning. Only for domestic use.

PAGE 7 OF 23 PAGE 8 OF 23 PAGE 9 OF 23 PAGE 10 OF 23 PAGE 11 OF 23 PAGE 12 OF 23

DESCRIPTION

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [e-mail] or
visit www.sportspowerfit4kids.com

M7TEG

DOME CLIMBER & SLIDER