SPORTSPOWER 4XMNK, 4XMNJ Assembly Instruction Manual

1820mm

2390mm

2200mm

APPROXIMATE ASSEMBLY TIME 2 PERSON ASSEMBLY REQUIRED ASSEMBLY SPACE

45

FLOOR AREA
3M x 2M x 2M

REQUIRED ASSEMBLY TOOLS

minutes

ASSEMBLED DIMENSIONS

WEIGHS16.1KG, BUILD IN LOCATION

4XMNK

DESCRIPTION:

TITAN DELUXE SWING & GLIDER

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.

After Service Centre ([phone]

1.Please check that all parts are present before
you start the assembly of your swing, as once
assembled, the swing is exempt from our home
approval policy.

2.For ease and speed of assembly, we
recommend that before you commence each
step of assembly, you should identify all the
parts required for that step.

TOP TIPS BEFORE YOU START

3.For larger items, please ensure that you have
sufficient space and people(as indicated on
page 1) to assemble your product safely.

4.During assembly, please take care not to
over-tighten any fittings, as this may damage
the product.

5.Please retain these instructions for future
reference.

UK WARNINGS

 Read and follow all instructions.
 WARNING! Not suitable for children under

36 months. Small parts/long cord­Strangulation Hazard.

 This unit is designed to be used safely by

up to 3 children between the age of 3 to 8.
Maximum weight of 50kg each,
simultaneously not to exceed a combined
weight of 150kg.

 No more than one user allowed on each seat.
 The equipment is designed for outdoor

domestic use only and is not suitable for hiring
or commercial use.

 Adult assembly required. Adult supervision is

required at all times while the swing is in use.

 Never leave children unattended during play, or

use the equipment in any manner other than as
intended.

 Never allow children to disembark from the

play equipment whilst it is still in motion.

 Ensure that children are not facing the sun

whilst using the equipment.

 Do not attach items to the equipment that are

not specially designed for use with this product,
including but not limited to cables, skipping
ropes and chains as they may cause
strangulation hazards.

 Never allow children to walk too close to, in

front of, behind or in between the equipment
whilst in use. Always keep children a safe
distance from the product whilst in use.

 Do not allow reckless playing, such as jumping

off, standing on seats or climbing ropes.

 Do not allow children to use wet seats or during

rainy or windy conditions.

 Instruct children to avoid swinging the empty

swing, twisting swing chains or ropes or
looping them over the top support bar since
this may reduce the strength of the chain or
rope.

 Do not allow children to climb on the swing

frame (legs, top bar, cross bars and other
parts) these are structural components only
and not play features.

 Instruct children to sit in the centre of the

swing, with their full weight in the middle of the
seats.

 Ensure that children wear suitable clothing

whilst using this equipment. Never allow
children to wear loose clothing, neck ties,
scarves, clothing with drawstrings or loose
jewellery.

 Please remove all packaging and packing

tags/wires before allowing children to use.

 Please take note: As an extra precaution,

check this toy regularly for signs of wear or
damage.

TIPS: BEFORE STARTING ASSEMBLY,
PLEASE CHECK ALL PARTS ARE INCLUDED,
IF ANY PARTS ARE MISSING, PLEASE CALL
([phone]

PAGE 2 OF 21

4XMNK

DESCRIPTION:

TITAN DELUXE SWING & GLIDER

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.

After Service Centre ([phone]

 At the start of assembling, do not tighten

bolt/nuts all the way, so as to allow some
possible adjustment, for ease of assembly.

TIGHTENING NUTS & BOLTS

 After all major components are assembled, go

back over all bolts and nuts and properly
tighten all of them before using this product.

ANCHOR WARNING

 The product should not be installed over

concrete, asphalt or any other hard surfaces.

 The equipment should be placed on a level

surface at least 2 m from any structure or
obstruction such as a fence, garage, house,
overhanging branches, laundry lines or
electrical wires.

 Do not use the equipment until it has been fully

assembled and anchored, and all the
components are secured. All the chains/ropes/
cables cannot be looped back on themselves.

 The anchor must be placed level with or under

the ground in order to reduce tipping hazards.

 Protective surfacing: One of the most important

things you can do to reduce the likelihood of
serious head injuries is to install
Shock-Absorbing Protective Surfacing (over
the ground) under and around your play
equipment. If you use loose -fill materials as a

surface, please follow these guidelines:
Maintain a minimum depth of 9 inches of
loose-fill materials such as wood mulch/chips,
engineered wood fibre, or shredded/ recycled
rubber mulch for equipment up to 8 feet high,
and 9 inches of sand or pea gravel for
equipment up to 5 feet high. NOTE: an initial fill
level of 12 inches will compress to about 9 inch
depth of surfacing over time. The surfacing will
also compact, displace and settle, and should
be periodically refilled to maintain at least a 9 ­inch depth. Carpeting and thin mats are
generally not adequate protective surfacing,
check and maintain the depth of the loose-fill
surfacing material to maintain the right amount
of loose-fill materials. Do not install loose fill
surfacing over hard surfaces such as concrete
or asphalt.

CARE AND MAINTENANCE INSTRUCTION

 Please carry out checks and maintenance of

the main parts (crossbeams, suspensions,
anchors nuts and bolts) at regular intervals.

 If these checks are not carried out the toy could

overturn or otherwise become a hazard.

 It is of particular importance that they be

followed at the beginning of each season as
well as at regular intervals during the usage
season.

 Check all nuts and bolts for tightness and

tighten when required.

 Oil all metallic moving parts;
 Check all coverings for bolts and sharp edges

and replace when required;

 Check swing seats, chains, ropes and other

means of attachments for evidence of
deterioration. Replace when required in
accordance with the manufacturer's
instructions.

 Remove plastic parts, such as swing seats or

similar parts or do not use when temperature
drops below 32 degree F(0 degree C).

PAGE 3 OF 21

4XMNK

DESCRIPTION:

TITAN DELUXE SWING & GLIDER

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.

After Service Centre ([phone]

 Tighten all hardware.

 Lubricate all metallic moving parts per

manufacturer's instructions.

 Check all protective coverings on bolts, pipes,

edges, and corners, replace if they are loose,
cracked, or missing.

 Check all moving parts including swing seats,

ropes, cables, and chains for wear, rust or
other deterioration. Replace as needed.

 Reinstall any plasic parts, such as swing seats

or any other items that were removed for the
cold season.

 Rake and check depth of loose fill protective

surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as
necessary.

At the beginning of each play season:

 Tighten all hardware.
 Rake and check depth of loose fill protective

surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as
neccessary.

Twice a month during play season:

 At the end of each play season or when the

temperature drops below 32 degress F(0
DEGREES C).

 Remove plastic swing seats and other items as

specified by the manufactured and take indoors
or do not use.

At the end of each play season:

 Please disassemble with care when it is no

longer in operational condition.

 Wear heavy duty working gloves!
 Consumer may wish to recycle the steel tubing,

please take the frame to your local recycling
center.

 Do not leave partially disassembled equipment

accessible by children.

 All plastic parts could be recycled, take it to you

local recycling centre.

 All rusted parts and bolts shall be properly

disposed of in houseware waste. Do not reuse.

 Do not let children play with any disassembled

parts destined for disposal, such as chain,
tubings, bolts, nuts, screws!

Disposal Instructions

WARNING

PAGE 4 OF 21

4XMNK

DESCRIPTION:

TITAN DELUXE SWING & GLIDER

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.

After Service Centre ([phone]

1

2

3

3

4

4

5

6

7

7

8

9

9

8

5

4

4

11

12

16

16

18

18

18

18

15

17

12

14

13

10

10

10

10

3

3

PAGE 5 OF 21

4XMNK

DESCRIPTION:

TITAN DELUXE SWING & GLIDER

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.

After Service Centre ([phone]

QTYPART LISTNO.

1

2

6

7

8

TOP SUPPORT BAR

1

1

1

2

2

9

44

416

217

111

213

212

215

214

410

25

418

GLIDER SUPPORT CHANNEL

GLIDER TOP TUBE

GLIDER LOWER TUBE

GLIDER SEAT TUBE

LOWER LEG

PLASTIC CONNECTOR

FOOTREST

SWING SEAT

PLASTIC CONNECTOR

GLIDER SEAT

PLASTIC SLEEVE

PLASTIC TUBE

ANCHOR

CROSS BAR

PLASTIC CAP

2

TOP SUPPORT BAR

4UPPER LEG 3

PAGE 6 OF 21

4XMNK

DESCRIPTION:

TITAN DELUXE SWING & GLIDER

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.

After Service Centre ([phone]

SW013H-TOPSPPRTBAR

SW013H­TOPSPPRTBAR2

SW013H-PLSTCSLV

SW-ANCHOR2

SW-XBAR

SW-FTREST

SW-GLDSEAT

SW031H-SUPCHANNEL

SW-GL01

SW013H-GLDSTTB

SW013H-TPTB

SW-LOWLEG

SW-TPLEG

SW-SEAT1

SW-PLASCONN

SW-PLASCONN2

SW-PLSTCTB

SW-CAP

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

0cm

10cm

9cm

8cm

7cm

6cm

5cm

4cm

3cm

2cm

1cm

11cm

12cm

"U" BOLT

M8×114mm

X2

A

BOLT

M8×61mm

X6

B

BOLT

M8×66mm

X4

C

BOLT

M8×50mm

X2

E

BOLT

M6×34mm

X2

F

BOLT

M6×60mm

X2

G

BOLT

M6×36mm

X4

I

BOLT

M8×95mm

X2

H

BOLT

M8×20mm

X2

D

PAGE 7 OF 21

4XMNK

DESCRIPTION:

TITAN DELUXE SWING & GLIDER

ASSEMBLY
INSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.

After Service Centre ([phone]

GEN-BOLTM6X36

GEN-BOLTM6X60

GEN-BOLTM8X20

GEN-BOLTM8X50

GEN-BOLTM8X61

GEN-BOLTM8X66

GEN-BOLTM8X95

GEN-UBOLTM8X114

GEN-BOLTM6X34

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT