SportsArt Fitness P756 Owner's Manual
1. INTRODUCTION..................................................................................................
2. IMPORTANT SAFETY PRECAUTIONS...............................................................
3. LIST OF PARTS...................................................................................................
4. ASSEMBLING THE PRODUCT
STEP 1 Seat Frame and the Connector Installation..........................................
STEP 2 Weight Stack Installation.......................................................................
STEP 3 Cable Installation..................................................................................
STEP 4 Cable Adjustment..................................................................................
STEP 5 Cable Slack Adjustment........................................................................
STEP 6 Foot Press Plate Installation.................................................................
STEP 7 Handle Installation.................................................................................
STEP 8 Seat Bottom Installation........................................................................
STEP 9 Seat Back Installation...........................................................................
STEP 10 Apply the Weight Stack Sticker............................................................
STEP 11 Cover Support Plate Installation...........................................................
STEP 12 Front Cover and Rear Cover Installation..............................................
STEP 13 Top Covers Installation..........................................................................
STEP 14 ........................................................................
STEP 15 ..........................................................................
5. OPERATION INSTRUCTION................................................................................
6. MAINTENANCE.....................................................................................................
MAINTENANCE Schedule....................................................................................
MAINTENANCE Task List......................................................................................
MAINTENANCE One-Year Maintenance Log.......................................................
7. CONSIGNES DE SECURITE IMPORTANTES.....................................................
Storage Tray Installation
Stack Fork Inspections
1
2
5
8
11
P756 OWNER’S MANUAL CONTENTS
‘ ‘
15
17
18
19
21
22
24
25
26
28
29
30
31
32
33
34
35
36
37
Congratulations on the purchase of a high quality SportsArt product, the P756
Horizontal Leg Press machine. Constructed of high quality materials and designed
for years of reliable performance, this product was made for full commercial use.
Before this product is assembled or operated, we recommend that you familiarize
yourself with this manual. Understanding the correct assembly and operation of this
product will help ensure that exercisers obtain their fitness goals safely and
successfully.
1
1. INTRODUCTION
2
2. IMPORTANT SAFETY PRECAUTIONS
This product was designed and built for optimum safety. However certain precautions
apply during the use of this product. Please note the following safety precautions:
．Please read the entire manual before assembly and operation. Make sure the
product is installed and operated as instructed in this manual.
．Assemble and operate the product on a solid, level surface. Do not use outdoors
or near water, including pools and saunas.
．Check the product before every use. Make sure all parts are assembled, and all
fasteners are tightened. Do not use the product if it is disassembled in any way.
．Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes with
leather soles or high heels. Tie all long hair back. Do not go barefoot on this
product.
．Keep away from moving parts. Moving parts may or may not stop immediately if an
object becomes caught or impedes normal motion.
．Use this product only for its intended purpose as described in this manual.
．Be careful when mounting and dismounting the unit.
．Never operate this product if it has been damaged in any way. If it is not working
properly, or has been dropped or damaged, contact a service technician for
repairs.
．Do not use accessories that are not specifically recommended by the
manufacturer. Such parts might cause injuries or cause the unit to fail.
．This product is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities, or by people who are otherwise deficient
in product knowledge or experience. If such people use this product, they should
be given training and be supervised at all times by someone responsible for their
safety.
．Children should be supervised to ensure that they do not play on or near the
product.
．The user weight limit for this product is 227 kg, 500 lb.
CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR
WORKOUT and consult your physician immediately. Work within your recommended
exercise level. DO NOT work to exhaustion. Before beginning any exercise program,
you should consult with your doctor. It is recommended that you undergo a complete
physical examination.
*NOTE: Regarding the decaled resistance on the unit weight stack, the actual weight
being lifted is configured at a ratio of 1:1. Example: If the stack fork is engaged at
60KG (132LB) at the weight stack, the actual pulling weight is 60KG (132LB).
．
．
．
．
．
．
．
．
．
．
．
．
．
．
Box A
3
3. LIST OF PARTS
Box B
Box C
4
No. Name Qty
No.
QtyDescription
A1
A2
A3
A4
A5
A6
A7
1
4
2
1
1
5
Box A - Main Frame Components
A8
A9
A10
A14
A15
A16
5
1
1
1
1
1
1
1
Weight stack top right cover
Weight stack top left cover
Main frame
Cover support plate B-2
Cover support plate B-1
Storage tray
Stack fork
Weight stack rod
Cover bracket
Cover support plate A
Rear cover
Front cover
Bracket
No. Name Qty
No.
QtyDescription
A20
A21
A22
A23
A24
1
1
1
1
1
Box B - User Frame Components
A25
A26
A27
A28
A29
1
1
1
1
1
Seat bottom
Handle
Connector A
Connector B
Connector C
Upper stack carriage set
Foot press plate
Stopper
Seat back
Seat frame
No. Name Qty
No.
QtyDescription
A30
A31
Box C - Weight Plates Components
A32
15
1
Weight plate sticker
(65kg~100kg/143lb~220lb)
5kg/11lb weight plate
No. Name Qty Notes
Specification
10
11
12
13
14
15
16
Components in the Hardware Kit
8
6
2
2
10
12
10
10
2
1
1
1
Mushroom top inner hex screw
Phillips screw
Bushing
Screw socket
Mushroom top inner hex screw
Mushroom top Phillips screw
Mushroom top Phillips screw
L-shaped Allen wrench
L-shaped Allen wrench
L-shaped Allen wrench
L-shaped Allen wrench
M6*P1.0*L12
M6*P1.0*L12
M6*P1.0*20
D19*7.8
SGN-07
M6*P1.0*L12
M5*L15
M5*0.8*L8
(M4)
(M5)
(M6)
(M8)
Weight plate sticker
(10kg~60kg/22lb ~132lb)
1
Round head inner hex screw
No. Name Qty Notes
Specification
Components in the Hardware Kit
2
1
1
(13*17)
Open end wrench
Open end wrench
Phillips-head screw driver
No. Name
Specification
Components on the Product
Hex head screw
Spring washer
Washer
Nylon hex lock nut
Mushroom top inner hex screw
Washer
Hex bolt
Spring washer
Washer
Connector plate
Bushing
Hex lock nut
Nylon hex lock nut
Hex head screw
Spring washer
Washer
Hex head screw
Flat washer
PU tube
Nylon hex lock nut
Guide rod
Cotter pin
Rubber washer
Stopper
Pin
Round head inner hex screw
Spring washer
Flat washer
Round head inner hex screw
Mushroom top inner hex screw
Spring washer
M10*P1.5*L130
M10
D16*d10.2*t1.0
M10
M10*P1.5*L25
D44*d10.5*t3.0
M10*P1.5*L75
M10
D16*d10.2*t1.0
W60*L156*t5
D16*t2*L39
M10
M10
M10*P1.5*L30
M10
D16*d10.2*t1.0
M8*P1.25*L65
D17*d8.3*t2
D12*d8*L51
M8
1.6t
D20*d11.1*t2
∮10.8*L50.5
M6*L30002230631
M6*t1.5
D20*d6.3*t1.5
M5*P0.8*L10
M6*P1.0*L12
M6
6
(27*29)
30
31
32
33
35
36
37
38
39
40
Notes
No. Name
Specification
Components on the Product
Flat washer
Axle
Nylon hex lock nut
Flat washer
Axle
Bushing
Soft cap
Round head inner hex screw
Spring washer
Flat washer
Nylon hex lock nut
Round head inner hex screw
Spring washer
Flat washer
Axle
Mushroom top inner hex screw
Spring washer
Flat washer
Nylon hex lock nut
Mushroom top inner hex screw
Spring washer
Flat washer
Mushroom top inner hex screw
Spring washer
Flat washer
Bevelled head inner hex screw
Nylon hex lock nut
Flat washer
Bevelled head Phillips screw
D20*d6.3*t1.5
D15*L26
M6*P1.0*6
D20*d6.3*t1.5
D8*L54.5
D12*d8*L7
D14
M8*P1.25*L25
M8*t2.0
D17*d8*t1.5
M8*P1.25
M8*P1.25*L20
M8
D26*d8.3*t3
D20*L153
M8*P1.25*L25
M8
D17*d8.3*t2
M8
M8*P1.25*L25
M8
D22*d8.2*t2
M8*P1.25*L25
M8
D22*d8.2*t2
M8*P1.25*L20
M8
M6*P1.0*L12
D20*d6.3*t1.5
M5*L8
Mushroom top inner hex screw
7
40
41
42
43
44
45
46
47
48
49
50
Notes
STEP 1 Seat Frame and the Connector Installation
8
4. ASSEMBLE THE PRODUCT
Follow instructions below to assemble this product. Note that in this manual the
words “left” and “right” are used to refer to the product and its parts. As such, these
designations correspond to the “left” and “right” sides of a person in position to
exercise on this product. Also, for brevity, the word “screws” or “nuts” is used where
washers and other hardware may be involved.
*Loosen and remove the screws (30) (31) (32) (33) and the connecting plates from
the components (A3) (A24) (A27) (A28) (A29) as shown. Carefully set each piece
aside.
9
(a). Use the screws (30) (31) (32) (33) to secure the connectors (A27) (A28) (A29) to
the main frame (A3) and the seat frame (A24) as shown.
10
STEP 2 Weight Stack Installation
11
Loading...