Sporti SEP001 User Manual
3D Pedometer Manual
SET
RES
MODE
Step
3D Pedometer Manual
Thank you for choosing our 3D pedometer. This pedometer can easily
track your walking or running. To get the most out of your purchase, be
sure to carefully read this manual and keep it on hand for future reference.
Contents
A. Features
B. Time/Weight Stride/Target Setting Mode
C. Total Step Mode
D. Step Mode
E. Distance Mode
F. Calories Mode
G. Active Mode
H. Memory Mode
I. Care Of Your Pedometer
A. Feautures
- Step range: up to 999,999 steps
- Distance range: up to 999,999 KM or miles
- Calories range: up to 99,999.9 kcal
- 12/24 hour display
- 30 day memory
- Target step
- Auto sleep function
B. Time/Weight/Stride/Target Setting Mode
Setting time/date/weight/stride/target flow chart:
- Press Mode until you enter Step Mode (“step” and the time will show)
- Press and hold “Set” for 2 Seconds to enter into the setting as follows:
12/24 hour format-Hour-Minute-Stride-Weight-Target
- Press Rest to increase the setting number; pressing and holding reset
will change the setting number rapidly
- There are 10 icons which show the percentage of your step to the target
steps on the left side LCD screen. When you reach target steps (100%).
The icon will be full of 10 icons and will flash with an alarm for 30 seconds.
The default steps is 5000, you can change your target steps to reflect your
fitness goals.
Step
PM
12 h r
Setup
Setup
PM
Setup Setup
Setup
in/cm
Setup
Lb
Setup
TargetStep
Hold “Set” key 2 seconds
enter to setting mode.
Set 12hr/24hr
Set time, seconds then hour
and finally minutes.
Set date, month then day
and finally year.
Set In or cm first then
set height.
Set weight.
Set target.
1.
3.
2.
4. 5.
6.
7.
8.
Loading...