Splawn Amplification street rod Owner's Manual

OWNERS MANUAL

Street Rod

POWERONSTANDBYONPRESENCE

BASS

MIDDLE

TREBLE

SOLO

VOLUME

GAIN

VOLUME

TREBLE

BASS

_____________CLEAN CHANNEL_______________

_______________________________________OVERDRIVE CHANNEL_______________________________

MODE

1st Gear

2nd Gear

3rd Gear

Thank you for purchasing your new Splawn amplifier. We have put together a little information that will help you
understand the amp and all of its functions. All of our amps are built in our shop in Dallas NC right here in the USA. We
build all of our speaker cabs and head boxes in house. Some parts of the amplifier are out sourced such as the
chassis's, circuit boards and transformers. The transformers are custom wound by Heyboer and are also made in the
USA. We hope that this amplifier will give you years of tonal pleasure.

Streetrod Front Panel Controls

1. Power Switch

-Switches main AC power on or off

2. Standby Switch

3. Presence Control

4. Bass Control

5. Middle Control

6. Treble Control

7. Solo Volume

8. Master Volume

9. Gain Control

10. Mode Switch

11. Clean Bass Control

12. Clean Treble Control

13. Clean Volume Control

-Switches the high voltage on or off

-High frequency control on the output section

-Controls the bass frequency on the overdrive channel

-Controls the middle frequency on the overdrive channel

-Controls the treble frequency on the overdrive channel

-Switchable volume control on the overdrive channel activated by the footswitch

-Controls the overall volume of the overdrive channel

-Controls the amout of pre-amp gain to the overdrive channel

-Three position switch that gives different pre-amp styles

-Controls the bass frequency on the clean channel

-Controls the treble frequency on the clean channel

-Controls the overall volume of the clean channel

(1st gear Classic ) (2nd gear Hot rodded) (3rd gear Super Hot rodded)

Splawn Amplification

115 South Gaston St.

Dallas, NC 28034

704-922-0020

www.splawnguitars.com