Spitwater WD151S, WD301S, WD602S, WD902P, WD603S Operating And Maintenance Manual

OPERATING AND MAINTENANCE
MANUAL
“SILVER LINE” VACUUM CLEANERS
WD151S-WD301S-WD602S
WD902P-WD603S
Spitwater Australia Pty Ltd 953 Metry St North Albury ,NSW, Australia
WARNING:
FAILURE TO FOLLOW OPERATING, SAFETY AND MAINTENANCE INSTRUCTIONS LISTED IN THIS MANUAL RELEASES THE MANUFACTURER FROM ANY RESPONSIBILITY FOR ACCIDENTS OR DAMAGES TO BOTH HUMANS AND OBJECTS AND MAY RENDER ANY WARRANTY VOID
3
Congratulations and thanks for purchasing the SPITWATER “SILVER LINE” VACUUM CLEANER. This is a high technology appliance, built to high standards of quality and aesthetics. It is a versatile, professional machine which, if it is used in accordance with instructions in this Manual, will give you a long period of use.
Therefore please read and follow these operating
instructions carefully.
TECHNICAL DATA
INTRODUCTION
All SPITWATER “SILVER LINE” VACUUM CLEANERS have been designed to give safe, efficient and reliable service. Like any other piece of equipment; however, the unit will only operate at maximum efficiency if the correct operating sequences are followed and proper attention is given to the maintenance procedures. The purpose of this manual is to provide the user with u p to date information necessary for operating, ma intaining and servicing the unit, together with fault finding techniques, general specification details and diagrams. The information given, however, may be subject to revision in compliance with the policy of continuing improvements.
HEALTH AND SAFETY AT WORK
Manufacturers and suppliers of products for use in the workplace have a duty to ensure, so far as is reasonably practicable, that such products are safe and without risk to health when properly used and to make available to users of such products adequate information about their safe and proper operation. SPITWATER “SILVER LINE” VACUUM CLEANERS should onl y be used in the manner and purpose for which t hey were intended and in accordance with the recommendation detailed in this Manual, and in any other Government Sta ndard applicable in your country. The units have been designed, produced and in spected with safety in mind; however, there are certain basic precautions which should be taken by the user and in particular, attention is drawn to the safety precautions in this Manual. Therefore, it is imperative that all persons who use this unit read and understand all of the information and instructions on the safe and correct use of this product in order to ensure th at they are fully aware of the hazards and that they are fully familia r with the purpose and correct manner of operation of this vacuum cleaner.
Model
WD151S WD301S WD602S WD902P WD603S
Capacity total L 24 40 75 116 75
usable L 15 30 60 90 60 Tank Material Stainless Steel Stainless Steel Stainless Steel Polyethylene Stainless Steel Air Flow L/s 53 53 106 106 159 Vacuum mBar 190 190 190 190 200 Noise Level db(A) 6565737377 Apllication Wet/Dry Wet/Dry Wet/Dry Wet/Dry Wet/Dry Motor Power P max W 1100 1100 2200 2200 3300
P W 1000 1000 2000 2000 3000 Voltage V 240 240 240 240 240 Absorption A 559913 Phases 11111 Hertz 5050505050
Accessories diameter mm. 36 40 40 40 40 Dimension L x W x H m m. 400x400x620 400x400x800 600x600x1000 500x550x960 600x600x1000 Weight kg 11 12 27 24 29
The Manufacturer reserves the right to modify designs features and techni cal data without notice
Loading...
+ 4 hidden pages