Spirit Fitness CT900ENT Owner's Manual
C T 900ENT TREADMILL
OWNER’S MANUAL
Spirit Fitness
www.spirittness.com
TABLE OF CONTENTS
3 IMPORTANT SAFETY INSTRUCTIONS
4 IMPORTANT ELECTRICAL INSTRUCTIONS
5 IMPORTANT OPERATION INSTRUCTIONS
6 PRODUCT REGISTRATION
7 CT900ENT ASSEMBLY INSTRUCTIONS
13 CONSOLE OPERATION
22 TOUCH SCREEN OPERATION
30 PROGRAMMING THE CONSOLE
48 GENERAL MAINTENANCE
49 MANUFACTURER’S LIMITED WARRANTY
Thank you for purchasing our product, please save these instructions. Please do not perform or attempt any
customizing, adjustments, repair or maintenance that is not described in this manual.
Spirit Fitness
Congratulations on your new treadmill and welcome to the Spirit Fitness family!
Thank you for your purchase of this quality treadmill from Spirit Fitness. Your new treadmill was
manufactured by one of the leading tness manufacturers in the world and is backed by one of
the most comprehensive warranties available. Through your dealer, Spirit Fitness will do all we
can to make your ownership experience as pleasant as possible for many years to come. If not
purchased directly from Spirit Fitness, the local dealership where you purchased this treadmill is your
administrator for all Spirit Fitness warranty and service needs. Their responsibility is to provide you
with the technical knowledge and service personnel to make your experience more informed and any
difculties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone number, and the
date of purchase below to make any future, needed contact easy. We appreciate your support and we
will always remember that you are the reason we are in business.
Yours in health,
Spirit Fitness
NAME OF DEALER _____________________________________
DEALER PHONE # _____________________________________
PURCHASE DATE _____________________________________
2
www.spirittness.com
IMPORTANT SAFETY
INSTRUCTIONS
DANGER —To reduce the risk of electric shock,
always unplug this treadmill from the electrical
outlet immediately after using and before cleaning.
WARNING
To reduce the risk of burns, re electric shock, or
injury to persons:
• Before beginning this or any exercise program,
consult a physician. This is especially important for
persons over the age of 35 or persons with preexisting health conditions.
• Keep children away from the treadmill. There are
obvious pinch points and other caution areas that can
cause harm.
• Keep hands away from all moving parts.
• Never drop or insert any object into any openings.
• Do not use outdoors.
• Do not attempt to use your treadmill for any purpose
other than for the purpose it is intended.
• The hand pulse sensors are not medical devices.
Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse
sensors are intended only as exercise aids in determining
heart rate trends in general.
• Wear proper shoes. High heels, dress shoes, sandals,
or bare feet are not suitable for use on your elliptical.
Quality athletic shoes are recommended to avoid leg
fatigue.
• Maximum User Weight: 450 lbs,
• This appliance is not intended for use by persons with
reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Keep children under the age of 13 away from this
machine.
• Never operate this treadmill if it has a damaged cord or
plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water.
• Keep the cord away from heated surfaces.
• Do not operate where aerosol (spray) products are being
use or where oxygen is being administered.
• Connect this treadmill to a properly grounded outlet only.
See Grounding Instructions.
3
Spirit Fitness
• ASTM F2115-05 Specications 6.1.2.11—The
recommended minimum clearance required around
each treadmill for access to, passage around, and
emergency dismount shall be stated. The minimum
dimensions are to be: 0.5 m (19.7 in.) on each
side of the treadmill, and 1 m (39 in.) behind the
machine.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
IMPORTANT ELECTRICAL
affected. Such conditions are not covered under your
warranty. If you suspect the voltage is low, contact
your local power company or a licensed electrician
for proper testing.
NEVER expose this treadmill to rain or moisture.
This product is NOT designed for use outdoors,
near a pool or spa or in any other high humidity
environment. The operating temperature specication
is 40 to 120 degrees Fahrenheit, and humidity is
95% non-condensing (no water drops forming on
surfaces).
4
INSTRUCTIONS
WARNING
NEVER use a ground fault circuit interrupt (GFCI)
wall outlet with this treadmill. As with any appliance
with a large motor, the GFCI will trip often. Route
the power cord away from any moving part of the
treadmill including the elevation mechanism and
transport wheels.
NEVER remove any cover without rst disconnecting
AC power. If voltage varies by ten percent (10%)
or more, the performance of your treadmill may be
Circuit Breakers: Some circuit breakers are not
rated for high inrush currents that can occur when a
treadmill is rst turned on or even during use. If your
treadmill is tripping the circuit breaker (even though
it is the proper current rating) but the circuit breaker
on the treadmill itself does not trip, you will need to
replace the facility breaker with a high inrush type.
This is not a warranty defect. This is a condition we
as a manufacture have no ability to control. This part
is available through most electrical supply stores. The
electrical outlet used should have a dedicated 20
amp circuit breaker.
www.spirittness.com
GROUNDING INSTRUCTIONS
This product must be grounded. If the treadmill should
malfunction or break down, grounding provides a
path of least resistance for electric current, reducing
the risk of electric shock. This product is equipped
with a cord having an equipment-grounding plug.
The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER – Improper connection of the equipmentgrounding conductor can result in a risk of electric
shock. Check with a qualied electrician or
serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify the
plug provided with the product if it will not t the
outlet; have a proper outlet installed by a qualied
electrician.
This product is for use on a nominal 110 volt/20
amp dedicated circuit, and has a grounding plug
that looks like the plug illustrated below. A temporary
adapter that looks like the adapter illustrated may be
used to connect this plug to a 2-pole receptacle as
shown if a properly grounded outlet is not available.
The temporary adapter should be used only until
a properly grounded outlet can be installed by a
qualied electrician. The green colored rigid earlug, or the like, extending from the adapter, must be
connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is
used, it must be held in place by a metal screw.
IMPORTANT OPERATION
INSTRUCTIONS
• NEVER operate this treadmill without reading
and completely understanding the results of any
operational change you request from the computer
console.
• Understand that changes in speed or incline do
not occur immediately. Set your desired speed or
incline level on the computer console and release
the adjustment key. The computer will obey the
command gradually.
• Use caution while participating in other activities
while on your Treadmill; such as watching television,
reading, etc. These distractions may cause you to
lose balance which may result in serious injury.
• Do not use excessive pressure on console control
keys. They are precision-set to function properly with
little nger pressure.
5
Spirit Fitness
WARNING
This product can expose you to chemicals including Toluene and Acrylamide which are known to the State
of California to cause Cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov
RECORD YOUR SERIAL NUMBER
Please record the serial number of this tness product in the space provided below. The serial number is
located at the front of the treadmill by the Power switch.
SERIAL NUMBER:
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to Spirit Fitness. You can
also go to www.spirittness.com/commercialwarrantyregistration.html under the Support tab to register online.
6
www.spirittness.com
CT900ENT PRE-ASSEMBLY
UNPACKING
1. Cut the straps and open box.
2. Locate the hardware package. The hardware is separated into four steps. Remove
the tools rst. Remove the hardware for each step as needed to avoid confusion.
The numbers in the instructions that are in parenthesis (#) are the item number from
the assembly drawing for reference.
TOOLS INCLUDED:
8mm Allen Wrench
2 Phillips Screwdrivers
PARTS INCLUDED:
1 Main Frame
2 Uprights
1 Main Panel
1 Console
1 Console Bracket Cover
4 Handrail Covers
2 Upright Covers
2 End Caps
7
Spirit Fitness
CT900ENT STEP ONE
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION QTY
65 BOLT M10x1.5x60mm 10
79 LOCK WASHER 10 10
1. Loosen the 8 screws holding the motor cover in
place and remove the cover.
2. Uncoil wiring harness and run wires through the
RIGHT UPRIGHT (7).
3. Use 5 BOLTS (65) and 5 LOCK WASHERS (79)
to attach the RIGHT UPRIGHT (7) to the MAIN
7
FRAME (1). Do not pinch wires. Do not tighten
before putting the console on.
8
65
79
4. Use 5 BOLTS (65) and 5 LOCK WASHERS (79)
to attach the LEFT UPRIGHT (8) to the MAIN
FRAME (1). Do not tighten before putting the
console on.
79
65
8
www.spirittness.com
CT900ENT STEP TWO
HARDWARE FOR STEP 2
68
79
63
74
74
79
63
3
PART TYPE DESCRIPTION QTY
63 BOLT M10x1.5x35mm 6
74 FLAT WASHER 3/8"x 2.5 6
79 LOCK WASHER 10 6
1. Install MAIN PANEL (3) onto the uprights using 6
BOLTS (63), 6 LOCK WASHERS (79) and 6 FLAT
WASHERS (74).
2. Run the wiring harness through the MAIN PANEL
(3) as shown in the illustration.
3. Tighten all bolts and washers on both uprights
(7 and 8) from previous step.
9
Spirit Fitness
CT900ENT STEP THREE
68
68
49
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
68 BOLT
M5x8x12mm
8
1. Wires should be away from the console mounting
bracket.
2. Install the CONSOLE (54) using 4 BOLTS (68).
3. Connect wiring harness to CONSOLE (54).
4. Attach CONSOLE BRACKET COVER (49) to MAIN
PANEL using 4 BOLTS (68).
10
www.spirittness.com
CT900ENT STEP FOUR
83
83
75
48
47
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
68 SCREW M5x.8x12mm 4
69 SCREW M5x.8x25mm 2
75 FLAT WASHER 5.5x19x1.5 4
83 SCREW 3.5x12mm 18
1. Attach LEFT OUTER HANDRAIL COVER (48) to
MAIN PANEL using 2 SCREWS (83) and 2 FLAT
WASHERS (75).
11
Spirit Fitness
CT900ENT STEP FOUR
2. Attach LEFT INNER HANDRAIL COVER (47) to MAIN
69
68
68
83
75
40
42
PANEL using 5 SCREWS (83).
3. Attach LEFT LOWER UPRIGHT COVER (40) to MAIN
FRAME (1) using 2 SCREWS (83), 2 FLAT WASHERS
(75), and 1 long SCREW (69).
4. Attach LEFT END CAP (42) to MAIN FRAME (1) using
2 SCREWS (68).
5. Repeat to install right side covers (45, 46, 39, 41).
6. Reinstall the MOTOR COVER (37) using the bolts
removed in Step 1.
12
www.spirittness.com
CT900ENT CONSOLE OPERATION
13
Spirit Fitness
Integrated adjustable fan
for workout comfort
15.6” touchscreen display with
multiple viewing modes
Tablet friendly
reading rack holder
Accessory trays for
secure placement of
water bottles, keys,
smartphones, etc.
Ergonomically
friendly hand grips
for pulse tracking
14
www.spirittness.com
STARTING OPERATION
Plug in the power cord located at the front base of the unit. When the power is turned on, the screen
will show the initial image and then enter the Home screen.
Home Screen: Begin operation by touching the icons.
Quick operating buttons are conveniently located
for basic treadmill functions.
15
Loading...