Spirit Z9 User Manual

OPERATING YOUR NEW TREADMILL!

Z100 / Z300

Z500

Z700

OWNER’S MANUAL

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE

Table of Contents

Product Registration…………………………………………………………………………. 2

Important Safety Instructions………………………………………………………………… 3

Important Electrical Information………………………………………………………………4

Important Operation Instructions……………………………………………………………..5

Assembly instructions………………………………………………………………………….6

Folding Instructions…………………………………………………………………………….7

Operation of Your New Treadmill……………………………………………………………. 8

Programmable Operation…………………………………………………………………….10

Target Heart Rate……………………………………………………………………………..14

Using a Heart Rate Transmitter……………………………………………………………...15

Heart Rate Control Operation………………………………………………………………..16

General Maintenance……………………….……………………………………………..….17

Service Checklist - Diagnosis Guide………………………………………………………...19

Manufacturer’s Limited Warranty…………………………………………………………….20

ATTENTION-

AND IS WARRANTED FOR THAT APPLICATION. ANY OTHER APPLICATION

VOIDS THIS WARRANTY IN ITS ENTIRETY.

THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE ONLY

TO THE SPIRIT FAMILY!

CONGRATULATIONS ON YOUR

NEW TREADMILL AND WELCOME

Thank you for your purchase of this quality treadmill from Spirit Manufacturing, Inc. Your new treadmill was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Spirit will do all we can to make your ownership experience as pleasant as possible for many years to come. The local dealership where you purchased this treadmill is your administrator for all Spirit warranty and service needs. Their responsibility is to provide you with the technical knowledge and service personnel to make your experience more informed and any difficulties easier to remedy.

Please take a moment at this time to record the name of the dealer, their telephone number, and the date of purchase below to make any future, needed contact easy. We appreciate your support and we will always remember that you are the reason that we are in business. Please complete and mail your registration card today and enjoy your new treadmill.

Yours in Health, Spirit Manufacturing, Inc.

Name of Dealer______________________________________ Telephone Number of Dealer___________________________ Purchase Date_______________________________________

Product Registration

RECORD YOUR SERIAL NUMBER

Please record the Serial Number of this fitness product in the space provided below.

Serial Number_______________________________________

The self-addressed product registration card must be completed in full and returned to Spirit Manufacturing, Inc or visit www.spiritfitness.com to register online.

Important Safety Instructions

WARNING - Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock disconnect your Spirit treadmill

from the electrical outlet prior to cleaning and/or service work. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the treadmill on a flat level surface with access to a 120-volt, 20-amp grounded outlet.

DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET. A serious shock or fire hazard may result along with computer malfunctions. See Grounding Instructions, page 4.

■ Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and treadmill may result.

■ Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance between the rear of the treadmill and any fixed object.

■ Keep children away from the treadmill. There are obvious pinch points and other caution areas that can cause harm.

■ Keep hands away from all moving parts.

■ Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not

working properly, call your dealer.

■ Keep the cord away from heated surfaces.

■ Do not operate where aerosol spray products are being used or where oxygen is

being administered. Sparks from the motor may ignite a highly gaseous environment.

■ Never drop or insert any object into any openings.

■ Do not use outdoors.

■ To disconnect, turn all controls to the off position, remove tether cord, then remove

the plug from the outlet.

■ Do not attempt to use your treadmill for any purpose other than for the purpose it is intended.

■ The pulse sensors are not medical devices. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The pulse sensors are

intended only as exercise aids in determining heart rate trends in general.

■ Use handrails provided; they are for your safety.

■ Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your treadmill. Quality athletic shoes are recommended to avoid leg

fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Important Electrical Information

WARNING!

●

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill.

Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.

●

NEVER remove any cover without first disconnecting AC power.

●

If voltage varies by ten percent (10%) or more, the performance of your treadmill may

be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing.

●

NEVER expose this treadmill to rain or moisture. This product is NOT designed for

use outdoors, near a pool or spa, or in any other high humidity environment.

Grounding Instructions

This product must be grounded. If the treadmill should malfunction or breakdown, grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

Grounded Outlet

Adapter

Tab of

Metal Screw

Grounding

Screw

Important Operation Instructions

●

NEVER operate this treadmill without reading and completely understanding the

results of any operational change you request from the computer.

●

Understand that changes in speed and incline do not occur immediately. Set your

desired speed on the computer console and release the adjustment key. The computer will obey the command gradually.

●

NEVER use your treadmill during an electrical storm. Surges may occur in your

household power supply that could damage treadmill components.

●

Use caution while participating in other activities while walking on your treadmill; such

as watching television, reading, etc. These distractions may cause you to lose balance or stray from walking in the center of the belt; which may result in serious injury.

●

NEVER mount or dismount the treadmill while the belt is moving. Spirit treadmills start

at a very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during slow acceleration is proper after you have learned to operate the unit.

●

Always hold on to a handrail or hand bar while making control changes (incline,

speed, etc.). Do not use excessive pressure on console control keys. They are precision set to function properly with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are not functioning properly with normal pressure contact your Spirit dealer.

Safety Tether Cord

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It is for your safety should you fall or move too far back on the tread-belt. Pulling this safety tether cord will stop tread-belt movement.

To Use:

1. Place the magnet into position on the round metal portion of the console control head. Your treadmill will not start and operate without this. Removing the magnet also secures the treadmill from unauthorized use.

2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet has strong enough power to minimize accidental, unexpected stopping. The clip should be attached securely to make certain it does not come off. Be

familiar with its function and limitations. The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled off the console. Use the red Stop / Pause switch in normal operation.

Assembly Instructions (Z9)

ASSEMBLY PACK CHECK LIST

5/16"x 1/2" Button Head Socket Screw (14pcs) 5/16” x 18 x 1.5T Flat Washer (6pcs) 5/16” x 23 x 1.5T Curve Washer (2pcs) Safety Key (1pc) Lubricant (1pc) M5 Allen Wrench (1pc) M6 Allen Wrench (1pc)

Assembly

■■■■ STEP 1

Remove all parts from the carton.

■■■■ STEP 2

Connect Computer Cable (middle) with Computer cable (lower).

■■■■ STEP 3

Hand tighten the Left and Right Handrails into the Base with 8 pcs of 5/16” x 1/2” Button Head Socket Screws, 6 pcs of 5/16” x 18 x 1.5T Flat Washers and 2pcs of 5/16”x 23x1.5T Curve Washers by using the M5 Allen Wrench.

■■■■ STEP 4

Connect Speed Adjustment Switch w/Cable with Speed Cable (middle). And connect Incline Adjustment Switch w/Cable with Incline Cable (middle).

■■■■ STEP 5

Hand tighten the Left and Right Handrails with 4 pcs of 5/16” x 1/2” Button Head Socket Screws by using the M5 Allen Wrench.

■■■■ STEP 6

Connect 12 pin 1300 mm Computer Cable (middle) with 12 pin 800 mm Computer cable (upper). Connect Speed Cable (middle) with Speed Cable (upper) and Incline Cable (middle)

+ 15 hidden pages