Spirit IN839 User Manual

OPERATING YOUR NEW TREADMILL!

OW

NER’S MANUAL

Z100 / Z300

BY

Z500

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE

Z700

Table of Contents

Product Registration…………………………………………………………………………. 2

Important Safety Instructions………………………………………………………………… 3

Important Electrical Information………………………………………………………………4

Important Operation Instructions……………………………………………………………..5

Assembly instructions………………………………………………………………………….6

Folding Instructions…………………………………………………………………………….8

Operation of Your New Treadmill……………………………………………………………. 9

Maintenance of Your New Treadmill…………………………………………………………11

Service Checklist - Diagnosis Guide…………………………………………………………13

Manufacturer’s Limited Warranty…………………………………………………………….. 14

ATTENTION-

AND IS WARRANTED FOR THAT APPLICATION. ANY OTHER APPLICATION

VOIDS THIS WARRANTY IN ITS ENTIRETY.

THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE ONLY

IN839

1

TO THE SPIRIT FAMILY!

BY

CONGRATULATIONS ON YOUR

NEW TREADMILL AND WELCOME

Thank you for your purchase of this quality treadmill from Spirit Manufacturing,
Inc. Your new treadmill was manufactured by one of the leading fitness
manufacturers in the world and is backed by one of the most comprehensive
warranties available. Through your dealer, Spirit will do all we can to make your
ownership experience as pleasant as possible for many years to come. The local
dealership where you purchased this treadmill is your administrator for all Spirit
warranty and service needs. Their responsibility is to provide you with the
technical knowledge and service personnel to make your experience more
informed and any difficulties easier to remedy.

Please take a moment at this time to record the name of the dealer, their
telephone number, and the date of purchase below to make any future, needed
contact easy. We appreciate your support and we will always remember that you
are the reason that we are in business. Please complete and mail your
registration card today and enjoy your new treadmill.

Yours in Health,
Spirit Manufacturing, Inc.

Name of Dealer______________________________________
Telephone Number of Dealer___________________________
Purchase Date_______________________________________

Product Registration

RECORD YOUR SERIAL NUMBER

Please record the Serial Number of this fitness product in the space provided below.

Serial Number_______________________________________

REGISTER YOUR PURCHASE

The self-addressed product registration card must be completed in full and returned to
Spirit Manufacturing, Inc or visit www.spiritfitness.com to register online.

IN839

2

Important Safety Instructions

WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock, disconnect your Spirit treadmill

from the electrical outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons,
install the treadmill on a flat level surface with access to a 120-volt, 20-amp
grounded outlet.

DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE
GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY WAY MODIFY
THE CORD SET. A serious shock or fire hazard may result along with computer
malfunctions. See Grounding Instructions, page 4.

■ Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both
carpet and treadmill may result.

■ Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance
between the rear of the treadmill and any fixed object.

■ Keep children away from the treadmill. There are obvious pinch points and other
caution areas that can cause harm.

■ Keep hands away from all moving parts.

■ Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not

working properly, call your dealer.

■ Keep the cord away from heated surfaces.

■ Do not operate where aerosol spray products are being used or where oxygen is

being administered. Sparks from the motor may ignite a highly gaseous
environment.

■ Never drop or insert any object into any openings.

■ Do not use outdoors.

■ To disconnect, turn all controls to the off position, remove tether cord, then remove

the plug from the outlet.

■ Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.

■ The pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are

intended only as exercise aids in determining heart rate trends in general.

■ Use handrails provided; they are for your safety.

■ Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your treadmill. Quality athletic shoes are recommended to avoid leg

IN839

3

fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Important Electrical Information

WARNING!

●

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill.

Route the power cord away from any moving part of the treadmill including the elevation
mechanism and transport wheels.

●

NEVER remove any cover without first disconnecting AC power.

●

If voltage varies by ten percent (10%) or more, the performance of your treadmill may

be affected. Such conditions are not covered under your warranty. If you suspect
the voltage is low, contact your local power company or a licensed electrician for proper
testing. See Diagnosis Guide, page 13.

●

NEVER expose this treadmill to rain or moisture. This product is NOT designed for

use outdoors, near a pool or spa, or in any other high humidity environment.

Grounding Instructions

This product must be grounded. If the treadmill should malfunction or breakdown,
grounding provides a path of least resistance for electric current, reducing the risk of
electric shock. This product is equipped with a cord having an equipment-grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result
in a risk of electric shock. Check with a qualified electrician or serviceman if you
are in doubt as to whether the product is properly grounded. Do not modify the
plug provided with the product if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks
like the plug illustrated below. A temporary adapter that looks like the adapter illustrated
below may be used to connect this plug to a 2-pole receptacle as shown below if a
properly grounded outlet is not available. The temporary adapter should be used only
until a properly grounded outlet (below) can be installed by a qualified electrician. The
green colored rigid ear-lug, or the like, extending from the adapter, must be connected
to a permanent ground such as a properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by a metal screw.

Grounded Outlet

Adapter

IN839

4

Metal Screw

Tab of

Grounding

Screw