Spirit CE850ENT User Manual

&7 (17ġ

/

ġ

ġġ

7U H D G P L O O



2:1( 5 § 6  0 $ 1 8$

Please carefully read this entire manual before operating yourġnew treadmillį



s

Table of Content

Important Safety Instructions……………………………………………………………………… 2

Important Electrical Information…………………………………………………………………… 3

Important Operation Instructions………………………………………………………………….. 4

Assembly instructions………………………………………………………………………………. 6

Operation of Your New Treadmill………………………………………………………………….. 11

Target Heart Rate…………………………………………………………………………………... 28

Using a Heart Rate Transmitter…………………………………………………………………… 29

Heart Rate Control………………………………………………………………………………...... 30

General Maintenance…………………………………………………………………………….......31

Exploded View Diagram and Parts List………………………………………………..……………33

-1-

Thank you for purchasing our product, please save these instructions. Please do not
perform or attempt any customizing, adjustments, repair or maintenance that is not
described in this manual, if you experience any difficulty, please contact our website.

NOTE:

Article number: CT850 ENT
Use:

Max. user’s weight.:150 kg

Studio use

WARNING

: The equipment shell be installed on a stable

base and properly leveled.

Dyaco International Inc.

Head Office:12F, No.111,Songjiang Road, Taipei 104,Taiwan

Tel:[phone] Fax:[phone]

Factory: No 1, Gong 1

Hemei Town, Changhua County 508, Taiwan

Tel:[phone] Fax:[phone]

ST

Road, Cyuan Sing Industrial Park

-2-

Important Safety Instructions

WARNING
DANGER -

- Read all instructions before using this appliance.

To reduce the risk of electric shock disconnect your treadmill from the

electrical outlet prior to cleaning and/or service work.

WARNING -

To reduce the risk of burns, fire, electric shock, or injury to persons, install

the treadmill on a flat level surface with access to a 120-volt AC, 20-Amp. grounded outlet.
With only the treadmill plugged into the circuit.

DO NOT USE AN EXTENSION CORD UNLESS IT IS 14AWG OR LARGER, WITH ONLY ONE
OUTLET ON THE END. The treadmill should be the only appliance in the electrical circuit. DO
NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN
ANY WAY MODIFY THE CORD SET. A serious shock or fire hazard may result along with
computer malfunctions.

Ŷ Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and

treadmill may result.

Ŷ Do not block the rear of the treadmill. Provide a minimum of 1 meter clearance between the

rear of the treadmill and any fixed object.

Ŷ Keep children away from the treadmill. There are obvious pinch points and other caution

areas that can cause harm.

Ŷ Keep hands away from all moving parts.

Ŷ Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working

properly, call your dealer.

Ŷ Keep the mains cord away from heated surfaces.

Ŷ Do not operate where aerosol spray products are being used or where oxygen is being

administered. Sparks from the motor may ignite a highly gaseous environment.

Ŷ Never drop or insert any object into any openings.

Ŷ Do not use outdoors.

Ŷ To disconnect, turn all controls to the off position, remove tether cord, then remove the

plug from the outlet.

Ŷ Do not attempt to use your treadmill for any purpose other than for the purpose it is intended.

Ŷ The pulse sensors are not medical devices. Various factors, including the user’s movement,

may affect the accuracy of heart rate readings. The pulse sensors are intended only as
exercise aids in determining heart rate trends in general.

Ŷ Use handrails provided; they are for your safety.

Ŷ Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on

your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

Ŷ This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.

Ŷ Do not modify the plug provided with the product if it will not fit the outlet; have a proper outlet

installed by a qualified electrician.

-3-

CAUTION:

To assure continued FCC compliance:

1. Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.

2. This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body.

3. Keep children under the age of 13 away from this machine.

Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!

MODEL: WT002

This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.

Cet appareil radio est conforme au CNR d’Industrie Canada. L’utilisation de ce dispositif est
autorisée seulement aux deux conditions suivantes :
(1) il ne doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à
accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.

-4-

Important Electrical Information

WARNING!

NEVER use a RCD - Residual Current Device (U.S. ver.= GFCI) - wall outlet with this treadmill.

As with any appliance with a large motor, the RCD/GFCI will trip often. Route the power mains
cord away from any moving part of the treadmill including the elevation mechanism and
transport wheels.
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%)

or more, the performance of your treadmill may be affected. Such conditions are not covered
under your warranty. If you suspect the voltage is low, contact your local power company or a
licensed electrician for proper testing.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors,
near a pool or spa, or in any other high humidity environment. The temperature specification is 40
degrees c, and humidity is 95%, non-condensing (no water drops forming on surfaces).
Circuit breakers: Some circuit breakers used in homes are not rated for high inrush currents that can
occur when a treadmill is first turned on or even during normal use. If your treadmill is tripping the
circuit breaker (even though it is the proper current rating and the treadmill is the only appliance on
the circuit) but the circuit breaker on the treadmill itself does not trip, you will need to replace the
breaker with a high inrush type. This is not a warranty defect. This is a condition we as a
manufacture have no ability to control. This part is available through most electrical supply stores.

Grounding Instructions

This product must be grounded. If the treadmill’s electrical system should malfunction or
breakdown grounding provides a path of least resistance for electric current, reducing the risk of
electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.

DANGER

a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the
plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be
used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is
not available. The temporary adapter should be used only until a properly grounded outlet, (shown
below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the like,
extending from the adapter, must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal
screw.

- Improper connection of the equipment-grounding conductor can result in

-5-

Important Operation Instructions

Ɣ

NEVER operate this treadmill without reading and completely understanding the results of any

operational change you request from the computer.

Ɣ

Understand that changes in speed and incline do not occur immediately. Set your desired
speed on the computer console and release the adjustment key. The computer will obey the
command gradually.

Ɣ

NEVER use your treadmill during an electrical storm. Surges may occur in your household

power supply that could damage treadmill components.

Ɣ

Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or stray
from walking in the center of the belt; which may result in serious injury.

Ɣ

NEVER mount or dismount the treadmill while the belt is moving. treadmills start with at a very

low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt
during slow acceleration is proper after you have learned to operate the unit.
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).

Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure. Pushing harder is not going to make the unit go faster or
slower. If you feel the buttons are not functioning properly with normal pressure contact your
dealer.

Safety Tether Cord

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used
at all times. It is for your safety should you fall or move too far back on the tread-belt.
Pulling this safety tether cord will stop tread-belt movement.

To Use:

1. Place the magnet into position on the console control head. Your treadmill will not start and
operate without this.

2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The

magnet has strong enough power to minimize accidental, unexpected stopping. The clip
should be attached securely to make certain it does not come off. Be familiar with its function
and limitations. The treadmill will stop, depending on speed, with a one to two step coast
anytime the magnet is pulled off the console. Use the red Stop / Pause switch in normal
operation.

-6-

Assembly Pack Check List

Step1

Step2

Step3

#117 - 3/8" x16.5 x2.0T x4H
Split Washer (10 pcs)

#144 - 3/8”-16 x 3”
Button Head Socket Bolt (10 pcs)

#134 - M5 x 12mm
Phillips Head Screw (4 pcs)

#116 -ȶ3/8" x 35 x 2T
Flat Washer (10 pcs)

#134 - M5 x 12mm
Phillips Head Screw (4 pcs)

Step4

#117 - 3/8" x16.5 x2.0T x4H
Split Washer (6 pcs)

#145 – 3/8”-16 x3/4”
Button Head Socket Bolt (6 pcs)

#162 - 3/8" ×1-3/4"_Button
Head Socket Bolt (2 pcs)

#125 -ȶ3/8" x25 x2T
Flat Washer (6 pcs)

#117 -3/8" x16.5×2.0×4H
Split Washer (2 pcs)

-7-

#146 – M8 x1.25x12mm
Socket Head Cap Bolt (6 pcs)

#163 - 10 × 23 × 1.5T
Curved Wash (2 pcs)

Assembly Instructions

Step 1: Uprights

z The right upright (34) is with preinstalled lower computer cable (42)ˣTV Signal Cable(171)ˣ

Console Power Cord(173)ˣnetwork W/Cable(175)ˣCSAFE W/Cable(177)ˣHDMI Cable(181)炻
To install uprights on the frame base, special care must be taken not to pinch the computer
cable between the upright and frame base. Use first 3/8"-16 × 3"_Button Head Socket Bolt (144)
together with 3/8'' × 16.5 × 2.0 × 4H_Split Washer (117), and 3/8" × 35 × 2T_Flat Washer (116)
through the top hole in the retaining plate (98), and corresponding top hole in the upright tube,
and screw into the base frame. Now install the other four bolts 3/8"-16 × 3"_Button Head
Socket Bolt (144) together with 3/8'' × 16.5 × 2.0 × 4H_Split Washer (117), and 3/8" × 35 ×
2T_Flat Washer (116) and tighten all five bolts up.



z Same as the above step to install left upright (33).
z Use four M5 × 12L Phillips Head Screws (134) install left and right motor base cap (26, 27)

-8-

Step 2: Installing the console

z &RQQHFWXSSHUFRPSXWHUFDEOH796LJQDO&DEOH&RQVROH3RZHU&RUGHWZRUN

:&DEOHˣ&6$)(:&DEOHˣ+'0,&DEOHˣ+DQGSXOVH:LUH8SSHUDQG

*URXQG:LUHDOOFRQQHFWWRWKHERDUGRQEDFNRIWKHFRQVROH

z 8VHIRXU0/3KLOOLSV+HDG6FUHZVWRVHFXUHFRQVROHDVVHPEO\RQWRWKHFRQVROH

VXSSRUW

-9-

Step 3: Installing console onto uprights

z Use six M8 × 1.25 × 12L Socket Head Cap Bolts (146) to secure the console on interface

mounting bracket on uprights (3, 4).

z Connect upper computer cable (41) and lower computer cable (42), upper TV Signal Cable

(170) and lower TV Signal Cable (171), upper Console Power Cord(172) and lower Console
Power Cord (173)ˣupper network W/Cable (174)and lower network W/Cable (175)ˣupper
CSAFE W/Cable (176)and lower CSAFE W/Cable (177)ˣupper HDMI Cable (180) and lower
HDMI Cable (181)

z Use six 3/8"-16 × 3/4" Button Head Socket Bolts (145), together with six 3/8'' × 16.5 × 2.0 × 4H

Split Washers (117) and six 3/8" × 25 × 2T Flat Washers (125) on top of uprights.
Be careful not to pinch the computer cable.

-10-

Step 4: Upright reinforcement

Tighten one 3/8" -16 x 1-3/4" Button Head Socket Bolt(162), together with one 3/8" x16.5 x2T x4H
Split Washer (117) and one 10 x23 x1.5T Curved Washer(163) through Upright (R) (34).
Same way for Upright (L) (33).

-11-