Spirent GSS6100 Data Sheet

Spirent Communications
Wireless & Positioning
Aspen Way, Paignton
Devon, TQ4 7QR, England
Telephone:
+44 1803 546325
Fax:
+44 1803 546301
sales-uk@spirentcom.com
www.
spirentcom.com/positioning
For US and Canada except
telecom:
Spirent Federal
Systems Inc.
22345 La Palma Avenue
Suite 105, Yorba Linda,
CA 92887
Telephone:
+1 714 692 6565
Fax:
+1 714 692 6567
info@spirentfederal.com
www.
spirentfederal.com
For US telecom:
Spirent Communications
Wireless & Positioning
541 Industrial Way East
Eatontown NJ 07724
Telephone:
+1 732 544 8700
ext: 123
Email:
sales-usa@spirentcom.com
GPS L1 Production Test System
Spirent GSS6100
The Spirent GSS6100 is designed specifically for high volume manufacturing test applications for devices that include a GPS L1 C/A code receiver. For many applications, a single channel GPS signal simulator is the preferred way to ensure that each device produced meets defined paramaters. While multi-channel GPS testing is essential during R&D, integration and verification testing, in a manufacturing environment many applications prefer a single channel to stimulate the receiver in a test mode. Controlled GPS testing in this way assures correct assembly and verifies expected performance parameters; typically C/No within a specified range for a given RF input power level.
Features
1 channel GPS L1 C/A code
GPIB (IEEE488), USB or RS232 control interfaces
Alternative “instant start” mode at power-on, based on pre-defined parameter values
Supplied SimCHAN PC software allows use in instrument mode as an alternative to GPIB (PC not supplied)
User control over test parameters including power level, Doppler, PRN, GPS time and data message
Rack mount 2U chassis
Comprehensive control ICD for easy integration into manufacturing test rigs
In-situ calibration procedure (no need to remove unit from rack)
L1 SBAS message support
Benefits
Easy integration with ATE control systems and other instruments
Configurable to minimise test time per device
In rack calibration ensures minimal downtime and disruption
In region and in country Spirent maintenance and repair service
Controlled testing assures shipped device quality
Industry-leading stability, quality and reliability
May be synchronized to other systems via 1PPS/Trigger, frequency standard input/output and 1PPS output
GSS4100 Compatibility
The GSS6100 supports all the functionality of the familiar Spirent GSS4100 single channel simulator. In addition, the GSS6100 offers an alternate operating mode that allows continuous generation of pre-defined parameters from power-on.
Production Test GPS System: Spirent GSS6100
MCD00014 09/05
GPS L1 Production Test System: Spirent GSS6100
Specification
Output Frequency
Nominal carrier 1575.42MHz
Doppler range ± 15,000 m/s
Relative frequency ± 78.8 kHz
Stability < ±1x10-9 /day
May be locked to an external standard of 1, 5 or 10MHz
Signal Level
Nominal -130dBm
(front panel)
-70dBm (rear panel)
Range ± 20dB
Resolution 0.1dB
Accuracy ± 1dB RSS
Signal Quality
Spurious (in GPS band) < -30dBc
Carrier Phase Noise < 0.1 rad RMS
Signal Flexibility
Ranging Code PRN 1-37 GPS
PRN 120-138 SBAS All G1/G2 codes On/off
Data message 50bps for GPS
250bps SBAS 500sps SBAS FEC User definable content
Physical
19” rack mount, 2U height case
Size
HxWxD overall 89x449x386mm
Electrical 100 to 264v
48 to 62Hz
Calibration adjustment
Accessible from rear panel of unit.
Product specifications (MS3037) is available on request.
Performance figures and data in this document are typical and must be specifically confirmed in writing by Spirent Communications (SW) Ltd. before they become applicable to any particular order or contract.
The publication of information in this document does not imply freedom from patent or other rights of Spirent Communications (SW) Ltd. or others.
For current product data, visit the Spirent websites at www.spirentcom.com/positioning or www.spirentfederal.com
Spirent Communications
Wireless & Positioning
Aspen Way, Paignton
Devon, TQ4 7QR, England
Telephone:
+44 1803 546325
Fax:
+44 1803 546301
sales-uk@spirentcom.com
www.
spirentcom.com/positioning
For US and Canada except
telecom:
Spirent Federal
Systems Inc.
22345 La Palma Avenue
Suite 105, Yorba Linda,
CA 92887
Telephone:
+1 714 692 6565
Fax:
+1 714 692 6567
info@spirentfederal.com
www.
spirentfederal.com
For US telecom:
Spirent Communications
Wireless & Positioning
541 Industrial Way East
Eatontown NJ 07724
Telephone:
+1 732 544 8700
ext: 123
Email:
sales-usa@spirentcom.com
© 2005 Spirent Communications, Inc. All rights reserved. Specifications subject to change without notice. Spirent Communications and the Spirent logo are trademarks of Spirent plc. All other names are trademarks or registered trademarks of their respective owners and are hereby acknowledged.
Typical Rear Panel Layout
Typical schematic: Spirent GSS6100
as part of a production test system
Production Test
Executive Software
Wireless Network
Emulator
Spirent GSS6100
Device
Under Test
IEEE488
GPIB
IEEE488
GPIB
GPS L1
C/A code
Loading...