Ball Float Steam Trap
FT 14
Description :
FT - 14 ball float steam trap is a condensate drain trap of Cast
Iron body and Stainless Steel internals.
Available Sizes and Pipe Connections :
40 and 50 NB screwed BSPT / NPT
Note : Available Non-IBR only.
Available types and Limiting Conditions :
FT 14 TV with Thermostatic air vent
FT 14 SLR with Steam lock release
Maximum operating conditions :
Type PMO TMO
0
FT 14-4.5 4.5 bar 156 C
0
FT 14-10 10 bar 184 C
0
FT 14-14 14 bar 198 C
Note :
PMO Maximum Operating Pressure
TMO Maximum Operating Temp.
Body Design Conditions :
0
16 barg at 120 C
0
13 barg at 220 C
Cold Hydraulic test pressure 32 barg.
Material :
Sr. Part Material Standard
No.
1. Body Cast Iron IS 210 FG 260
2a) Cover Bolts Carbon Steel H.T.IS 1367 Gr. 8.8
b) Cover Buts Carbon Steel H.T.IS 1367 Gr. 8
3. Cover Gasket Reinforced exfoliated Graphite
4. Cover Cast Iron IS 210 FG260
5. Main Valve Assly. Stainless Steel ASTM A 276
with Erosion Deflector Type 304
6. Main Valve Assly. Reinforced exfoliated Graphite
Gasket
7. Main Valve Assly. Carbon Steel H.T.IS 1367
Studs & Nuts 40 Gr 8
& 50 NB
8. Ball Float Stainless Steel Type 304 ASTM A-240
9. Air Vent Assly. Stainless Steel Type 316 ASTM A-240
10. Air Vent Seat Gasket Stainless Steel Type 304 ASTM A-240
*11 SLR Unit Stainless Steel Type 410 ASTM A-276
*12 SLR Unit Gasket CRCA IS513
*13 SLR Seat Stainless Steel Type 410 ASTM A-276
*14 SLR Seat Gasket Stainless Steel Type 304 ASTM A-240
15 Diflector Plate Stainless Steel Type 304 ASTM A-240
*Items not shown. See overleaf.
Dimensions (approx.) in mm. :
Size A B C D E F Weight
40 NB 270 127 110 244 200 274 17.5 kg
50 NB 300 140 125 250 205 286 22 kg
General Tol : k3
spirax
Subject to change without notice 1000/July / 2006 / 5392 STIS - 20
Manufactured and Marketed by :
Spirax Marshall Pvt. Limited
A Forbes Marshall Company
P.B. No. 29, Mumbai-Pune Road, Kasarwadi, Pune - 411 034. India.
Tel. : 91 (O) 020 27145595 Fax : 91 (O) 020 27147413, 27147593
URL : http://www/forbesmarshall.com/spirax
Braches : Ahmedabad, Alibag, Bangalore, Chandigarh, Chennai, Coimbatore,
Delhi, Hyderadabad, Jamshedpur, Kolkata, Mumbai, Nagpur, Navi
Mumbai, Pune, Surat, Vadodara, Visakhapatnam.
Representatives :Bhopal, Kanpur, Luckown, Madurai, Pondicherry, Trichy.
How to Sepcify :
Example : 40 NB BSPT FT - 14, 14 Bar, TV
Installation :
The arrow on the name plate must point downwards. The
arrow on casting indicates the flow direction.
Capacity Charts :
Optional Extras :
Draincock tapping : The cover can be drilled and tapped 1/2"
BSPT to enable a drain cock to be fitted.
Servicing :
With suitable isolation repairs can be carried out with trap on
line. Undo cover bolts and lift off cover. When re-assemling
make sure that all joint faces are clean. Always use a new
gasket and apply a thin coating of jointing paste. Tighten
cover bolts uniformly. Open up isolating valve.
Spare Parts :
The spare parts available are shown in heavy outline. Parts
drawn in broken line are not supplied as spares..
Available Spares :
Main Valve Assembly with Erosion deflector A
Air Vent Assembly B
Steam Lock Release Unit C
Sets of Gasket (Pkt. of 5 Sets) D
Float E
How to Order Spares :
Always order spares by using the description given in the
column headed 'Available Spares' and stating the size and
type and differential pressure of Trap. For Codes Ref. User
Manual.
Available Spares :
DIFFERENTIAL PRESSURE bar (x 100 = kPa)
Forbes
Marshall
Loading...