Thank you for choosing HMP
Follow these easy steps to get started
Step 1: Connect Screen
You need a screen with an HDMI port and an HDMI cable (not included).
1Connect one end of the HDMI cable to the HDMI port of your HMP.
2Connect the other end of the HDMI cable to the HDMI port of the display device.
Step 2: Connect Network
You need an Ethernet cable (not included).
1Connect one end of the Ethernet cable into the Ethernet port of your HMP.
2Connect the other end of the Ethernet cable to the Ethernet port of a LAN-Switch or computer.
Step 3: Connect Power
HMP comes with a Power Supply Unit (PSU) and a line power cable.
1Connect the DC power cable attached to the PSU to the DC input port of your HMP.
2Connect the line power cable to the PSU.
3Connect the other end of the line power cable into a power outlet.
4Switch on the display device and the LAN-Switch or computer.
Step 4: Setup HMP
To set up your HMP, follow the on-screen instructions.
1Push the blue button of your HMP.
2Type the IP address shown on your screen in your browser’s address bar.
3Follow the instructions to complete the setup.
4Once you complete the setup, your HMP will restart.
Loading...