SpillTech GTOP User Manual

Safety Data Sheet

1. Product and Company Identification

Product Identifier: HazMat, Oil-Only and Universal Polypropylene Absorbents

General Use: Polypropylene Absorbents are designed to confine and absorb leaks, drips, over-spray and

spills of various liquids.

Product Description: Pads and rolls available in a variety of shapes, sizes and colors.

Specific Product Identifiers: (includes but not limited to) Responder™ Mats, Defender™ Mats, Commander™

Mats, Polybacked Commander™ Mats, Protector™ Mats, Survivor™ Mats, Transformer™ Mats, AirLaid™
Mats, TrackMat, RigMat, Polybacked RigMat, DrumTops, Sweep

COMPANY PROFILE: TELEPHONE NUMBERS:
SpillTech Emergency: [phone]
Brookley Aeroplex Technical Information: 1 [phone]
Mobile, AL 36615 www.spilltech.com

2. Hazards Identification

GHS Classification: Not a dangerous substance according to GHS

POTENTIAL HEALTH EFFECTS:
Eye Contact: No hazard in normal use of product. If dust is generated, may scratch the eyes.
Ingestion: No hazard in normal use of product.
Inhalation: No hazard in normal use of product. If dust is generated, may cause minor irritation to the

respiratory tract. Low order of toxicity.

Skin Contact: No hazard in normal use of product.
Chronic: Not applicable.

3. Composition / Information on Ingredients

CAS: 9003-07-0 Polypropylene 100%

May contain one or more of the following:
CAS: Proprietary Surfactant
CAS: Proprietary Dye pigment
CAS: None Metal hardware
CAS: 25038-59-9 Polyester netting
CAS: 9003-07-0 Polypropylene rope
CAS: 9002-88-4 Polyethylene pans

These products do not contain any hazardous ingredients

SDS # SDS101 Page 1 of 5 June 15, 2015

Safety Data Sheet

4. First Aid Measures

Eye Contact: Not normally applicable. If discomfort occurs, flush thoroughly with water. If irritation occurs,
seek medical attention.

Ingestion: Not applicable.
Inhalation: Not normally applicable. If discomfort occurs, seek medical attention.
Skin Contact: Not applicable.

5. Fire Fighting Measures

Extinguishing Media: Unused form: CO2, water fog, foam or dry chemical. Do NOT use straight streams of
water. Used form: that which is compatible to liquid(s) absorbed.

Special Fire Fighting Procedures: None. Refer to absorbed liquid(s) SDS(s).
Hazardous Combustion Products: Smoke, fume, incomplete combustion products, oxides of carbon,

flammable hydrocarbons.
Unusual Hazards: When heated, the vapors/fumes given off may cause respiratory tract irritation. Sorbents
will take on the characteristics/properties of whatever liquid is absorbed. Therefore, all measures must be
taken as if you were handling the liquid itself. Sorbents do not make the liquid less hazardous. Refer to
absorbed liquid(s) SDS(s) before proceeding. Material can accumulate static charges which may cause an
ignition. Oil-Only Static Dissipative Polypropylene Absorbents do not render liquids nonflammable, neutral or
less hazardous.

6. Accidental Release Measures

Spill or Leak Procedures: If material is unused, sweep or pick up and dispose of as a non-hazardous
material.

7. Handling and Storage

Handling and Storing Precautions: Minimize dust generation and accumulation. Store in cool, dry place.
General: Sorbents will take on the characteristics/properties of whatever liquid is absorbed. Therefore, all

measures must be taken as if you were handling the liquid itself. Sorbents do not make the liquid less
hazardous. Refer to absorbed liquid(s) SDS(s) before proceeding.
The container can be hazardous when empty. Follow label cautions even after the container is empty. Do not
re-use empty containers for food, clothing or products for human or animal consumption, or where skin
contact can occur.

SDS # SDS101 Page 2 of 5 June 15, 2015