F
AST
sing the F303W Fast Wireless Charger
U
W
e hope you enjoy wireless charging with your new F303W
Fast Wireless Charger! Please read this manual before using
the product and use it for future reference.
w to Connect to an AC Adapter
Ho
Charging Mode
emove
R
protective lm before use.
net strips or chips (IDs, credit cards, etc.)
with mag
in such
with y
our purchase?
F303W
Specica
•
nput: DC 5V 2A or 9V 1.67A
I
• Radiated power: 5W, 9W
• Charge eciency: ≥70%
• Transmission distance: 0.27 inch (Max)
tions
Po
rt
• Size: 7.55 × 3.3 × 0.74 inches
• Product Weight: 4.23 ounce
• Frequency: 111~205KHz
nce all parts are connected, the lights will appear
O
in the order below:
1. BL
UE LED blinks once
2. RED LED blinks once
3. BOTH blink once
4. BOTH OFF: Standby Mode
T
he LED light will indicate when it is on Standby Mode.
Char
ging will begin as soon as the phone is placed on
the stand and turn LED lights to reect its status as shown
in the table below.
t Status
LED Ligh
Adapter
5V 2A Adapater
QC2.0 or QC3.0
(F
ast Charger, 9V 1.67A)
During charge Fully charged
LED Blue light
essage: Wireless charging)
(M
ed light
LED R
essage: Fast Wireless charging)
(M
LED Blue
LED Blue, Red
ON
ON
, Red
7. For fast charging, use a QC 2.0 or QC 3.0 adapter of 9V 1.67A.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Loading...