Spiegelberg IAP 32.1, IAP-Monitor Operating Instructions Manual
Spiegelberg:
IAP-Monitor
IAP 32.1
Operating-Instructions
Manufacturer
SpiegelbergSpiegelberg
SpiegelbergSpiegelberg
Spiegelberg
(GmbH & Co.) KG(GmbH & Co.) KG
(GmbH & Co.) KG(GmbH & Co.) KG
(GmbH & Co.) KG
TT
TT
T
empowerkring 4empowerkring 4
empowerkring 4empowerkring 4
empowerkring 4
21079 Hamburg21079 Hamburg
21079 Hamburg21079 Hamburg
21079 Hamburg
GermanyGermany
GermanyGermany
Germany
Phone:Phone:
Phone:Phone:
Phone:
+49-40-790-178-0+49-40-790-178-0
+49-40-790-178-0+49-40-790-178-0
+49-40-790-178-0
Fax:Fax:
Fax:Fax:
Fax:
+49-40-790-178-10+49-40-790-178-10
+49-40-790-178-10+49-40-790-178-10
+49-40-790-178-10
Email:Email:
Email:Email:
Email:
info@spiegelberg.deinfo@spiegelberg.de
info@spiegelberg.deinfo@spiegelberg.de
info@spiegelberg.de
http://wwwhttp://www
http://wwwhttp://www
http://www
.spiegelberg.de.spiegelberg.de
.spiegelberg.de.spiegelberg.de
.spiegelberg.de
BEDIAP32.1.91 V 2.0 © by Spiegelberg (GmbH & Co.) KG, 2003
Innovative
Measurement
Technology for
Medicine
0297
CE-marking according to directive
93/42/EEC
Technical alterations reserved.
Pinout of DB 9 Socket
1: Uref Input
2: RxD
3: TxD
4:
5: Analog Output
For use as a voltage output
pins 1 and 6 are connected by a
jumper.
For use as a monitor output the
excitation voltage is fed into the
reference input and the analog
output is scaled down by a resistive
divider.
Data Transmission across
the RS 232 C Interface
The IAP-Monitor responds to single
ASCII bytes:
To the monitor
´A´
´B´
´C´
6: Uref Output (2,5 V)
7: Digital Gnd
8:
9: Analog Gnd.
Response
Mean pressure in ASCII string
format, terminated by
´Carriage Return´.
Mean pressure in binary
format, 1/10 mm Hg resolution,
two´s complement, two
bytes, high byte first.
Instantaneous pressure in
binary format, 1/10 mm Hg
resolution, two´s complement,
two bytes, high byte first. Response
only after new value is
read in (every 10 ms).
9 2
Contents
Safety instructions
Indication and Method
Monitor Operation
Cleaning
Connections
Faults
Technical Specifications
Accessories
2
3
4
5
6
7
8
10
Safety Instructions
The IAP-Monitor and the accompanying catheters are designed for
the measurement of intraabdominal
pressure. The manufacturer accepts
responsibility for the safety,
reliability and performance of the
monitor only if:
- the installation, extensions,
readjustments, modifications and
repairs are performed by
authorized personnel,
- the electric installation of the
room is in accordance with the
national regulations concerning
rooms used for medical
purposes,
- the monitor is used in
accordance with the operating
instructions, and
- the monitor is used with the
approved accessories.
WW
WW
W
arningarning
arningarning
arning
The device is not intended
for use in areas where
there is a danger of
explosion.
WW
WW
W
arningarning
arningarning
arning
The device may be
repaired only by persons
or companies that are
authorized to do so.
WW
WW
W
arningarning
arningarning
arning
The device is not intended
for use during ElectroSurgery/Diathermy.
WW
WW
W
arningarning
arningarning
arning
Grounding reliability can
only be achieved if the
device is connected to an
equivalent power cord
marked „hospital grade“
or „hospital only“.
Loading...