Spicer Tubing Part Numbers User Manual

W e recom m end genuine Spicer

Outside

Diameter

Wall

Thickness

S - Seamless

W - Welded

D.O.M - Drawn

Over Mandrel

Tube Inside

Diameter

TUBING PART NUMBER

54/68” Length 73/74” Length 100” Length

1.250” .095” W - D.O.M. 1.057” -- -- 10-30-42-10000

1.250” .120” S 1.010” -- -- 10-32-92-10000

1.250” .188” W - D.O.M. .876” -- -- 10-32-72-10000

1.750” .065” W 1.620” 14-30-12-5400 -- 14-30-12-10000

1.750” .095” W 1.560” -- 14-30-62-7400 14-30-62-10000

2.000” .065” W 1.870” -- -- 16-30-32-10000

2.000” .083” W 1.834” 16-30-62-5400 16-30-62-7400 16-30-62-10000

2.000" .083" W - D.O.M. 1.834" -- -- DT16-30-62

2.000” .120” W 1.760” -- -- 16-30-102-10000

2.000" .120" W - D.O.M. 1.760" -- -- DT16-30-102

2.500” .065” W 2.370” 20-30-12-5400 20-30-12-7400 20-30-12-10000

2.500” .083” W 2.334” -- 20-30-22-7400 20-30-22-10000

2.500" .083" W - D.O.M. 2.334" -- -- DT20-30-22

2.500” .095” W 2.310” 20-30-52-5400 -- 20-30-52-10000

2.750” .065” W 2.620” -- 22-30-12-7400 22-30-12-10000

2.750" .065" W - D.O.M. 2.620" -- -- DT22-30-12

2.750” .083” W 2.584” -- -- 22-30-22-10000

3.000” .065” W 2.870” -- 24-30-32-7400 24-30-32-10000

3.000" .065" W - D.O.M. 2.870" -- -- DT24-30-32

3.000” .083” W 2.834” -- 24-30-42-7400 24-30-42-10000

3.000" .083" W - D.O.M. 2.834" -- -- DT24-30-42

3.000” .095” W 2.810” -- 24-30-12-7400 24-30-12-10000

3.000" .120” S 2.760" -- -- 24-32-142-10000

3.000” .134” W 2.732” -- 24-30-72-7400 24-30-72-10000

3.500” .065” W 3.370” -- 28-30-42-7400 28-30-42-10000

3.500" .065" W - D.O.M. 3.370" -- -- DT28-30-42

3.500” .083” W 3.334” -- 28-30-62-7400 28-30-62-10000

3.500" .083" W - D.O.M. 3.334" -- -- DT28-30-62

3.500” .095” W 3.310” -- 28-30-22-7400 28-30-22-10000

3.500" .095" W - D.O.M. 3.310" -- -- DT28-30-22

3.500” .134” W 3.232” -- 28-30-92-7400 28-30-92-10000

3.500" .134" W - D.O.M. 3.232" -- -- DT28-30-92

3.500” .156” W 3.188” -- 28-30-52-7400 28-30-52-10000

3.500" .156" W - D.O.M. 3.188" -- -- DT28-30-52

3.550" .207" W - D.O.M. 3.136" 28-30-122-6800 -- 28-30-122-10000

4.000" .065" W - D.O.M. 3.870" -- DT143T --

4.000" .083" S 3.834" 32-38-12-1640M(1) -- --

4.000” .083” W 3.834” -- 32-30-22-7400 32-30-22-10000

4.000" .083" W - D.O.M. 3.834" -- -- DT32-30-22

4.000” .095” W 3.810” -- 32-30-12-7400 32-30-12-10000

4.000” .120” W 3.760” -- 32-30-42-7400 --

4.000” .134” W 3.732” -- 32-30-52-7400 32-30-52-10000

4.000” .134” W - D.O.M. 3.732” -- 32-30-92-7300 32-30-92-10000(2)

4.095” .180” W - D.O.M. 3.735” -- 32-30-72-7300 32-30-72-10000(3)

4.213” .138” W - D.O.M. 3.937” -- 100-30-3-7300 100-30-3-10000(4)

4.331” .197” W - D.O.M. 3.937” -- 100-30-5-7300 100-30-5-10000(4)

4.500” .134” W - D.O.M. 4.232” -- 36-30-62-7300 36-30-62-10000(5)

4.500” .259” W - D.O.M. 3.982” -- 36-30-22-7300 36-30-22-10000

4.540" .083" S 4.374 5002511-1679M(6) -- --

4.590” .180” W - D.O.M. 4.230” -- 36-30-102-7300 36-30-102-10000

4.724” .197” W - D.O.M. 4.330” -- 110-30-5-7300 110-30-5-10000(4)

4.961” .118” W - D.O.M. 4.725” -- 120-30-3-7300 120-30-3-10000(4)

5.059” .167” W - D.O.M. 4.725” -- 120-30-4-7300 120-30-4-10000(4)

5.118” .197” W - D.O.M. 4.725” -- 120-30-5-7300 120-30-5-10000(4)

5.197” .236” W - D.O.M. 4.725” -- 120-30-6-7300 120-30-6-10000(4)

(1) Aluminum Tube; 64 18/32" Length (2) Replaces 4.062" - .165" wall tube. (3) Use in the place of 4.000" - .134" tube when heavy duty tubing is required. (4) Metric tubing used on Spicer Life (5) Use in the place of 4.562" - .165" tube when heavy duty tubing is required. (6) Aluminum Tube; 66 3/32" Length

D.O.M. (Drawn Over Mandrel) tubing is not seamless.

™ driveshafts.

Dana Corporation Heavy Vehicle Technologies and Systems Service

PO Box 321 Toledo, Ohio 43697-0321 1-800-SAY-DANA (729-3262)

www.spicerparts.com

J3203-1-HVTSS

10/06 Printed in U.S.A