Spicer Heavy Axle End Fitting Part Number Interchanges User Manual
Spicer
®
Drive Axle
AB
Information Bulletin
Bulletin Type: Service/Technical Information
Topic: Heavy Axle End Fitting Part Number Interchanges
Affected Models: All Drive Axle Yokes & Flanges
To better serve or customers and the market place, Dana Corporation’s Heavy Vehicle
Technologies and Systems Service (HVTSS) division is pleased to announce the following
changes to select axle end fitting part numbers and the process for ordering these numbers.
Effective immediately, we have changed the part numbers of select axle end fittings to better
align with the numbering scheme with all other Spicer® end fittings. Attached is a cross
reference chart from the old part numbers, formally used by our Henderson, Kentucky axle
facility, to the new numbers. The “Henderson type” part numbers will no longer be recognized
by our system. Please make these part number changes in your system and begin ordering
using the new numbers immediately.
Certain Henderson numbers were identified as obsolete and have been superceded to a “half
round” configuration end fitting. To incorporate this new configuration it is necessary to replace
the universal joint kit on the mating end of the driveshaft and will also require the appropriate
strap and bolt kit identified in the last column of the cross reference chart. This change will
allow the driveshaft to properly mate with the new end fitting.
Additionally, oil seals were often include with end fitting that were shipped from the Henderson
facility, but will no longer be included. Oil seals are now required to be ordered separately
using their respective original OEM part numbers.
Finally, these part numbers must be ordered through our Holland, OH Customer Service
department. The Henderson, Kentucky Customer Service department has been consolidated
into the Holland, Ohio group.
Information regarding these changes was also communicated via Service Bulletin JOI-PNI-198.
IB-0607
Original Dana
Henderson Part-No.
030383 6-4-4171X
039521 5-4-5121X
042200 3-4-5791-1X
047999 4-4-3581-1X
048976 4-4-4071-1X
050567 5-4-5111X
073589 5-4-4761X
073590 5-4-4761X
073592 6-4-4851X
073593 6-4-4861X
073594 6-4-4861X
082468 6-4-4751X
083800 6-4-4591
083801 6-4-5481X
084886 6.5-4-2361X
087512 6.5-4-2401X
087513 6.5-4-2401X
088912 6-4-5151X
099715 5-4-5161X
109639 6.3-4-241X
119334 3-4-5791-1X
119336 4-4-1901-2
119649 5-4-8711X
119739 5-4-6591-1X
119951 3-4-6221-1X
119953 3-4-5791-1X
126253 6.5-4-2361-1X
126310 6-4-7651X
126425 3-4-10461-1X
126427 3-4-10471-1X
126429 4-4-5611-1X
126469 5-4-7301X
126531 5-4-7301-1X
126532 3-4-10261-1
126533 3-4-10471-1X
126535 6-4-7581-1X
126555 4-4-5691-1X
126561 5-4-8131-1X
126581 6-4-7531X
126583 6.3-4-1161X
126585 6.5-4-3921X
126651 6-4-9191X
126652 6.3-4-1641X
126653 6.5-4-4621X
126686 6-4-7531-1X
Now Sold as
Driveshaft Part-No.
Original Dana
Henderson Part-No.
126688 6.3-4-1161-1X
126690 6.5-4-3921-1X
126716 6-4-4171-1X
126868 3-4-11921-1X
126872 3-4-11921-1X
127001 6.3-4-1331-1X
127003 6-4-7971-1X
127187 127187
127414 232511
127415 6-4-9031X
127557 232514
127558 6-4-9041X
127617 6-4-8981-1X
127618 6.3-4-5221X
127619 6.5-4-4571X
127620 5-4-9261-1X
127621 6.5-4-4571-1X
127622 6.3-4-5221-1X
127624 6-4-9001X
127637 6-4-8991X
127638 5-4-9271X
127698 127698
127702 6-4-7651-1X
127738 5-4-8441X
127739 6-4-8511X
127740 6-4-8521X
127742 6-4-8541X
127743 5-4-8421X
127744 6-4-8531X
127745 5-4-8411X
127747 4-4-7551-1X
127748 4-4-7551-1X
127749 6.5-4-4351-1X
127750 5-4-8431-1X
127751 6.3-4-1481-1X
127752 6-4-8551-1X
127753 6.5-4-4351X
127754 6-4-8551X
127755 6.3-4-1481X
128056 128056
128410 6-4-8511-1X
128412 6-4-8531-1X
128444 5-4-8901-1X
128506 6-4-8541-1X
128508 6-4-8521-1X
Now Sold as
Driveshaft Part-No.
Loading...