Spicer 127588 User Manual
Spicer
Drive Axles
P/N: SHAIS174
INFORMATION SHEET – 127588 NUT TORQUE
Affected Models: All Dana Models That Use the 127588 Locknut
Below are the general specifications for 127588 locknut. This is a “torque prevailing” locknut. The
nut is to be used on drive pinions, input & output shafts that do not have a cotter pin hole drilled thru
the threads.
Part-No: 127588
Thread Size: M39x1.5
®
Torque: 680-832 lbs. ft (920-130 N.m)
For spec’ing or service assistance, call 1-800-621-8084 24 hours a day, 7 days a week.
Or visit our web site at:
SHAIS174A Copyright Dana Corporation, 2006 Heavy Vehicle Technologies and Systems Service
April 2006 All Rights Reserved. P.O. Box 321
Printed in U.S.A.
http://www.spicerparts.com
www.dana.com
Toledo, Ohio 43697-0321
Dana Corporation
1
Loading...