Spicer 126155 User Manual
Spicer
Drive Axles
P/N: SHAIS176
INFORMATION SHEET – 126155 NUT TORQUE
Affected Models: All Dana Models That Use the 126155 Locknut
Below are the general specifications for the 126155 locknut. This is a “torque prevailing” locknut.
The nut is to be used on drive pinions, input or output shafts that do not have a cotter pin hole drilled
thru the threads.
Part-No: 126155
Thread Size: M48x1.5
Socket Size: 70mm
®
Torque: 840-1020 lbs. ft (1139-1383 N.m)
For spec’ing or service assistance, call 1-800-621-8084 24 hours a day, 7 days a week.
Or visit our web site at:
SHAIS176A Copyright Dana Corporation, 2006 Heavy Vehicle Technologies and Systems Service
April 2006 All Rights Reserved. P.O. Box
Printed in U.S.A. www.dana.com Toledo, Ohio 43697-0321
http://www.spicerparts.com
Dana Corporation
321
1
Loading...