Spicer 119353 User Manual

Spicer

Drive Axles

P/N: SHAIS190B

INFORMATION SHEET – 119353 NUT TORQUE

Affected Models: All Dana models that use the 119353 Locknut

Below are the general specifications for 119353 locknut. This is a “torque prevailing” locknut. The nut is to be used on drive pinions that have two .250” [6.35 mm] diameter holes drilled thru the threads.

Torque nut to the amount listed below. Align slot in nut to the next pin hole by tightening nut. Insert pin into slot flush with flats of nut.

Part-No: 119353

Thread Size: 1.750” x 12

Socket Size: 2 5/8”

Torque: 900 - 980 lbs. ft (1220 - 1328 N.m)