Spice mobile M-5151 User guide

Spice Mobiles Ltd. ©2009. All rights are reserved. No part of this
document may be reproduced without permission. All trademarks and
brand names mentioned in this publication are property of their
respective owners.

While all efforts have been made to ensure the accuracy of all contents
in this manual, we assume no liability for errors or omissions or by
statements of any kind in this manual, whether such errors are
omissions or statements resulting from negligence, accidents, or any
other cause. The contents of this manual are subject to change without
any prior notice.

Protect your environment! We strive to produce products in compliance
with global environmental standards. Please consult your local
authorities for proper disposal.

Note: User‟s Manual is just to guide the user about the functionality of
the phone. This does not seem any certificate of technology. Some
functions may vary due to modifications and upgradations of software
or due to print mistake.

SAFETY PRECAUTIONS

Do not use wireless phones while driving.

Switch off wireless devices in aircraft. The signal
may cause interference. Using them on aircraft is
illegal.

Do not use mobile phones near fire. Follow every
rules and regulations. .

Do not use mobile phones at refueling point. Don‟t

use near fuel or chemicals.

Follow every rules and regulations in hospital and
health care facilities. Switch off your phone near
medical equipments.

All wireless devices may cause interference.

Only qualified service personnel can install or repair
this device.

Use only approved accessories and batteries.

Use the device only in normal position. Do not
expose your phone to extreme high temperatures
above +60℃（+140°F）. Do not use anything static to
clean your phone.

Ensure the phone is turned on and in service. Enter
the emergency number, then press Pick Up key.
Give your location. Do not end the call until told to
do so.

Before using your phone, please read the following important
information to eliminate or reduce any possibility of causing damage
and personal injury.

Table of Content

GENERAL INFORMATION ..................................................... 1

Antenna ............................................................................................ 1

Network Service ............................................................................... 1

Accessories ...................................................................................... 2

KNOW YOUR MOBILE PHONE ............................................. 3

Positions of Phone Keys .................................................................. 3

Functions of Keys ............................................................................. 4

Display Screen ................................................................................. 5

Status Icons ..................................................................................... 6

Back Light ........................................................................................ 6

GETTING STARTED ................................ ............................... 7

First Call ........................................................................................... 7

Mounting the SIM Card .................................................................... 7

Mounting the T-Flash Memory Card ................................................. 8

Charging the Battery ........................................................................ 8

Switching Your Phone On/Off ......................................................... 10

Using the Personal Handsfree Handset ......................................... 10

CALLING ................................................................................ 11

Making Calls ................................................................................... 11

Answering Calls ............................................................................. 12

Options in Call ................................................................................ 12

GUIDE TO MENU OPERATIONS ......................................... 13

Phone Book .................................................................................... 13

Messages ....................................................................................... 16

Call Center ..................................................................................... 20

Settings .......................................................................................... 26

Media Center .................................................................................. 31

User profiles ................................................................................... 37

Organizer ....................................................................................... 39

Services ......................................................................................... 47

Fun & Games ................................................................................. 48

IMPORTANT INFORMATION ................................................ 49

Use of Passwords .......................................................................... 49

Battery Information ......................................................................... 50

Usage & Maintenance .................................................................... 52

Emergency Calls ............................................................................ 53

APPENDIX ............................................................................ 54

Appendix A: Guidance On Entry Methods...................................... 54

Appendix B: Troubleshooting ......................................................... 56

Appendix C: Available Accessories ................................................ 57

Appendix D: FCC Statement .......................................................... 57

1

GENERAL INFORMATION

Antenna

Use of other antenna devices could damage your mobile phone and
reduce performance. Your phone has a built-in antenna. Don‟t touch the
antenna area unnecessarily when the phone is switched on. Contact
with the antenna affects call quality and may cause the phone to
operate at a higher power level than otherwise needed.

Network Service

To use the phone you must have service from a wireless service
provider .Many of the features in this device depend on features in the
wireless network to function. These network services may not be
available on all networks or you may have to make specific
arrangements with your service provider before you can utilize network
services. Your service provider may need to give you additional
instructions for their use and explain what changes will apply. Some
network may have limitations that affect how you can use network
services.

Your service provider may have requested that certain features
may be disabled or not activated in your device. If so, they will not
appear in the device menu. Your device may also has been specially

2

configured, this configuration may include changes. Contact your
service provider for more information. For availability and information
using SIM card services, contact your service provider.

Accessories

Li-Ion battery is the manufacturer-approved rechargeable battery
available for your phone. May be some batteries perform best after
several full charge/discharge cycles.
Use batteries, chargers and accessories approved by the phone
manufacturer with this particular model. The use of any other type will
invalidate any approval or warranty applying to the phone, and may be
dangerous.
Please consult with your dealer for availability of approved accessories.

3

KNOW YOUR MOBILE PHONE

1. Earpiece

9. Number keys

2. Screen

10. Right Soft Key

3. Left Soft Key/ Slave SIM Call Key

11. Cord hole

4. Selection key

12.Microphone

5. Master SIM Call Key/ Call Log

13. Battery Cover

6. End Key and Power On/Off key

14. OK key

7. Charger and
accessories connector

15. Camera

8. Torch/ Currency Checker

Positions of Phone Keys

4

Functions of Keys

Key

Name

Description

Master

SIM Call

Key

Making or answering a call from
Master SIM.
In the standby mode, press this key to
access the Call Logs.

Call End

Key

End an ongoing call.
Press and hold this key to turn on or
off the mobile phone.
In the menu mode, press this key to
return the standby mode and cancel
current operations.
Press this key to stop the alarm
ringing once the alarm rings.

Right Soft

Key

Use the right soft keys to execute to
functions indicated at the right of the
prompt bar on the screen.

Slave SIM

Call Key /

Left Soft

Key

Use the left soft key to execute to
functions indicated at the left of the
prompt bar on the screen.
In the standby mode, press it to access
main menu.

When the “Master SIM & Slave SIM

open” has been selected, press the left

soft key to making a call with Slave
SIM card after press the number key or
get into the function of phonebook.

5

Selection

Key

Scrolling options in the function list or
the phone book.
In the edit mode, it is used for moving
the cursor.
In the standby mode, press it to
activate a specified function.

Numeric

Keys

Used to enter numbers, letters and
some special characters.
In the standby mode, press and hold
the # key to activate Silent mode,
In the edit mode, you can press the #
key to switch the input method, press
the * key to display the symbols. Long
Press of “* Key” to activate/
deactivate “Torch Light”, Long Press
of “5 Key” to activate/deactivate “UV
Currency Checker Light”, Long
Press of “0 Key” to activate “FM
Radio”

Display Screen

Your mobile phone has a single LCD display, which consists of three
main areas:
The First line displays status icons, which indicate the signal strength,
the remaining power of the battery, etc.
The Middle lines display text and graphics, including numbers, text,
animated icons and the information you enter.
The Last line displays the currently available operations assigned to the
left or right soft key.

6

Status Icons

Master SIM Network Signal

Slave SIM Network Signal

Connecting GPRS and using GPRS

Connecting GPRS but no data alternating

Divert all Voice Calls

Auto Keypad Lock

Alarm Clock is activated

Battery Status

Missed Calls

New SMS/MMS or Message Memory Full

MMS is busy

Roaming Startup

WAP Message

Ring only

Vib. only

Vib. then Ring

Silent

Sound Status

Note: The picture is for reference only; the product is subject to the real
one.

Back Light

You can set the Back Light for the display and keypad through options
in the menu. The backlight will be off automatically without any key
operation.

7

GETTING STARTED

First Call

 Switch off your phone, remove the battery, insert SIM card.

Enter the area code and phone number and press Call Key.
Tip: Before you start insert a valid SIM card in your phone and
charge the battery.

 SIM Card: Please refer to “Mounting the SIM Card” for more

reference on installation.

 Charging the battery: Please refer to “Charging the Battery” for

more details.

Mounting the SIM Card

Your mobile phone number, PIN (Personal Identification Number), PIN2,
PUK (Personal Unlock Key), PUK2 (Personal Unlock Key2), IMSI
(International Mobile Subscriber Identity), the network information, the
phonebook data, SMS (short messages) and other data are stored in
your SIM card.
Note: This particular phone model only supports the SIM cards of 1.8V
and 3V.
 Some network operators don‟t offer PIN2 and PUK2, so functions

using those passwords will be unavailable.

 The SIM card and its contacts can be easily damaged by

scratches or bending, so be careful while handling, inserting or

removing the card.
 Keep all miniature SIM cards out of children‟s reach.
Note: Always make sure that the phone is switched off before you insert
or remove the SIM card, otherwise it may damage the SIM card.

Mounting

1. Remove the battery cover by sliding it.

2. Open the gold cap from the Hinge Type Connector. Lay the SIM card

which gold contacts face down on the Connector, then close it.

8

3. Replace the battery and close the cover tightly.

Note:

 If the SIM Card is not installed properly or gets damaged, “Insert

SIM” will display on the screen after you switch on your phone.

Remove the SIM Card and mount it again as shown in the picture

 If you have inserted the SIM correctly but still “Insert SIM” appears

on the screen, please ensure there is no stain on the surface of the
SIM card. If there are some stains on it, please clean them with
rubber carefully and then try again.

 If the screen displays that the SIM card is locked permanently,

please consult with your network operator.

Mounting the T-Flash Memory Card

Please follow the steps as described below:
Open the gold cap from the Hinge Type Connector. Lay the T-Flash
card with gold contacts facing down on the Connector, then close it.
Align the card to the arrow sign as shownin the picture :

Note:

Please plug the T-Flash card when the power of phone is off
otherwise the phone is needed to restart to guarantee normal function
of the T-Flash card. Do not plug the T-Flash card when power is on,
as it may cause abnormal circumstances.

Charging the Battery

Note: Always keep your phone connector and charger dry.

1. Connect the connector of the travel adapter to the phone.

9

2. Plug the travel adapter into a proper AC wall outlet.

3. When your phone indicates that the battery is fully charged,

please pull the travel adapter out from the I/O socket of the
phone.

Tip: 1. If the battery is totally empty or not enough, it may take a few

minutes before the charging indicator appears on the screen.

2. You can turn on/off, and use the phone while charging.
Warning: Make sure that the standard voltage/power of the place
where you charge the battery matches with the rated voltage/power of
our travel adapter.

10

Switching YourPhone On/Off

 Press and hold Power Key for few seconds to switch on your

phone.

 If the phone ask for a phone lock code:

Enter the phone lock code, and press OK.

 If the phone ask for a PIN code:

Enter the PIN code, and press OK. The PIN code is usually supplied
with the SIM card. Please consult your network operator for more
information.

 Access the standby mode.

Press and hold Power Key for a few seconds to switch your phone
off.

Using the Personal Handsfree Handset

Connect the handsfree handset to your mobile phone, you can still
answer calls and use the microphone without holding the phone.

11

CALLING

Making Calls

1. Enter the phone number (with the area code)

2. Press Master SIM Call Key/Slave SIM Call Key to make a call

through the respective SIM.

3. Press End Key to end a call.

Making International Calls

1. Press the * key twice for the international prefix symbol +.

2. Enter the country code, area code and phone number.

3. Press Pick up Key to make a call.

Making Extension Calls

1. Enter the host number, and press the * key three or four times for the

extension prefix symbol P or W.

2. Enter the extension number, and press Master SIM Call Key/Slave

SIM Call Key to make a call.

Clear Wrong Enters

Press right soft key to delete the last character on the screen. Hold right
soft key will clear all you entered.

Making a call from the Phone Book

Method 1:

1. Press right soft key to access the Phone Book List. Scroll to search

the desired number. (Enter the first letter or more of the name and
press the selection key Up/Down to reach the desired name.)

2. Press Master SIM Call Key/Slave SIM Call Key to call the number.

Method 2:

1. Select” Menu > Phonebook”.

2. Select” Quick Search” to find the number you want, and press the

Master SIM Call Key/Slave SIM Call Key to call the number.

Last Number Redial

1. In the standby mode, press Call Key to access the Call Logs.

12

2. Press the Up/Down key to reach the desired number or name and

press Master SIM Call Key/Slave SIM Call Key.

Speed Dialing

You can save 8 Speed Dial Numbers you often dial to position titled with
number keys from “2” to “9” respectively. Select “Call Center > Call
settings > Advance Settings > Speed Dial > Set Number”, and then set

“Enable Speed Dial” . In the standby mode, press and hold one of the

number keys from “2” to “9” until the call is started.

Adjusting the Sound Volume

During a call, you can press the Up/Down Key to adjust the earpiece
volume.

Answering Calls

1. To answer an incoming call, press Call Key or left soft key.

2. To end or reject an incoming/ongoing call, press End Key.

Options in Call

Your phone provides a number of functions that you can use during a
call.
During a call, you can access Hold/End single call, New Call, Phone
Book, Message center, Sound Recorder and other functions.

13

GUIDE TO MENU OPERATIONS

All functions about the mobile phone is listed as below with brief
descriptions.

Phone Book

You can save many phone numbers in your mobile phone. The capacity
of your SIM card decides how many phone numbers can be saved in
the SIM card. You can access the Phone Book to search all the records
saved in this mobile phone and your SIM card.

Quick Search

You can quickly locate the number of the person you want to contact.
Please enter the initial letter of the person‟s name, it will display the
related records in the middle of the screen. Please use the Up/Down
key to select the number as desired, and then press Pick Up Key to
make a call.

Search Contact

You can find the desired phone number from the phone book easily and
quickly. In the standby mode, press left soft key to access Menu >
Phone Book > Search contact. Please follow steps as described
below:

1. In the Name box, enter the letters of the name or initial letters of the

name.

2. Press left soft key to access Options > Search > Phone Book List,

and all related information of the desired contact will be listed.
Please use the Up/Down key to browse all entries, and then press
Pick Up Key to make a call.

3. Press OK key to access Entry Options, and then you can perform

following operations for each entry:

 Call: Take the number to make a call.
 Send text message: Send messages to the selected number.
 Send multimedia message: Send MMS message to the

selected number.

14

 View: Check the record for the selected number.
 Edit: Edit the selected entry.
 Delete: Delete the entry from the Phone Book.
 Copy: You can copy each entry from the SIM card to the phone

or from phone to the SIM card. i.e. SIM to Phone Copy or
Phone to SIM Copy.

 Move: You can move each entry from the SIM card to the phone

or from the phone to the SIM card.

 Send vCard: Send your phone number by text message /

multimedia message or Save as file.

 Send by SMS: Send the entry by SMS.
Tip: Pressing one of the number keys from 2 to 9, will show starting

by the letter corresponding to the key you pressed For example, in
order to search for the record of someone whose name starts with C,
press the key 2 quickly for 3 times, the cursor will skip to the first
entry of the contacts whose names are initialized with C.

Add New Contact

You can add a new contact entry to the Phone Book, both for the SIM
card and your phone. Steps described as below:

1. From the Phone Book menu, press left soft key to select Add New

Entry> To Master SIM/To Slave SIM/To Phone.

2. If the To Master SIM/To Slave SIM is selected, press the left key to

select OK to start editing the contact names and phone number.

3. If the To Phone is selected, you can add the contact‟s name, phone

number, home number, company name, email address, office

number, fax number, birthday and so on.
Tip: This mobile phone offers you several input methods, such as
Multitap ABC (ABC), Multitap abc (abc), Numeric (123), Smart ABC (eZi
ABC), Smart abc (eZi abc) and so on. Please refer to “Appendix A:
Guidance of Entry Methods” for more details.

15

Copy All

This function enables you to copy all the entries from both the SIM
card and the phone.
Note: If the capacity of this phone book is different from the SIM card's,
the copy content takes the smaller one as standard.

Move All

This function enables you to move all the entries from the SIM card or
the phone.

Delete

You can select delete entries form the SIM card, the Phone or one by
one.

Caller Groups

You can set group name, caller ringtone, caller picture, and members
for different caller group.

Extra Numbers

You can set Master/Slave SIM Owner Number, Master/Slave SIM
Service dialing number, and SOS Number.
 Master/Slave SIM Owner Number: You can enter numbers in 2

groups and a name, you can and can also edit or remove it.
 Master/Slave SIM Service dialing number: You can enter Service

dialing number.
 SOS Number: You can enter five groups of SOS numbers.
Note: If the keypad is locked, you can dial SOS numbers that you edit.
 Tracker number: You can edit the Tracker number.

Phone Book Backup

This application allows easy transfer and backup of contacts stored in
your phone/SIM. It supports import and export of VCF files.

Phonebook Settings

 Memory status: display the occupied storage and the total storage.

16

 Preferred Storage: select the SIM or Phone as the preferred storage

for the new number.

 Fields: select the desired option when you add a new number.
 My vCard: can edit and send my card.
 Vcard Version: You can set Vcard 2.1 or Vcard 3.0.
 Human Voice Prompt: You can set On or Off.

Messages

Text Message

Short Message Service (SMS) is a network service. Your home network
may not support the service. Please consult your home network
operator for more information.

1. Enter the Menu, and select Messages.

2. Press the left soft key to enter the function.

Write Message

1. Please press the # key to switch input methods while editing a

message. You can enter letters and numbers, and insert pictures

and rings. (Support EMS service)

2. Edit your message, and press the * key to insert special symbols.

3. Select Options, and then you can do: Master/ Slave SIM Done,

Insert Templates, Insert Object and so on.

4. When you select Master/ Slave SIM Done, you can send or save as

desired.

Inbox

The icon means an unread message or the message box is full.
You would not receive new messages once the message box is full.
Please delete unnecessary messages.

1. Select the unread message, and press the left soft key to read.

2. Select Options, and then you can reply, delete, forward and so on.

Outbox

The screen will display the message list once you select the Outbox.

17

1. Select “OK” to read the current messages.

2. Select Options, and then you can send, edit or select other

operations.

Templates

You mobile phone saves many messages in common use. You can edit,
remove or write message.

SMS Settings

You can set the default information about SMS properties.

Schedule SMS

Press the left soft key to access the Add or Options > Add, and then you
can set the date, time, message, enter number, and select SIM card.
Press Done and Save the message will sent out the message to the
number as your desire.

Note: The time format of this function is 24 hours.

MMS

Please consult your network operator to obtain the MMS services.

Write Message

While writing messages, you can select To, Cc, Bcc, Subject or Edit
content.

 To: You can enter the phone number or E-mail address..
 Cc: send the MMS to others at the same time. You can enter phone

numbers or E-mail addresses.
 Bcc: send the MMS to others secretly at the same time. You can

enter phone numbers or E-mail addresses.

 Subject: edit the Subject of the MMS.
 Edit content: enter the text or add picture, audio and so on.

Inbox

The phone saves the received MMS into the inbox.
All received Messages display in the inbox, and the icon means the
MMS is unread. Use the Down/Up key to scroll the cursor to check the
list, and the sender's name and number will display. If the MMS has
been read, the icon will change to the read icon. Please press the left

18

soft key to access Options, and then you can view, reply, delete and so
on.

Outbox

In the Outbox, please select Options, and then you can send, or select
other operations.

Drafts

In the Drafts, please select Options, and then you can send, edit or
select other operations.

Templates

User defined: you can save many MMS in it.
Default: You mobile phone saves many MMS in it.
And you can View MMS, Write Message and Set the Properties for
MMS.

MMS Settings

Please follow steps described as below:

1. Compose: You can configure Creation Mode, best page time, auto

signature, signature.

2. Send: You can configure Validity period, Delivery Report, Read

Report, Priority, Slide Timing, and Delivery Time.

3. Retrieve: You can configure Home Network, Roaming, Read Report,

and Delivery Report.

4. Filter: You can configure Anonymous and Advertisement.

5. Server Profile: You can select one profile from 6 Profiles to activate,

edit, or delete.

6. Memory Status: You can check the Usage, Used space and Free

space.

Chat

Use this function to chat with the sender by sending messages.
 Chat Room Info: select one chat room to set My Nickname and

Destn. Number.

 Start New: enter words and start to chat with the preset number.

19

Voicemail Server

Scroll the Up/Down key to select Voicemail Server in the Messages
menu, and select OK to access Voicemail Server.

 Call Voice Mail: You can hear the messages in the voice mailbox.
 Edit: Input or modify the number of voice mailbox.

Note: This service is supplied by the network, such as the message
machine service. It enables the caller to leave messages when you
cannot or Do Not want to answer the incoming call. Your number will be
saved in the voice mailbox.. In standby mode, hold the number key 1 to
dial the number of the voice mailbox after the number is configured.
Please consult your network operator for more details.

Broadcast Message

This network service enables you to receive all kind of text messages,
such as weather reports or transportation information. There are
several networks who afford this service in this world. Please consult
your network operator for more reference.

 Receive Mode: Turn on or off the Cell Broadcast.
 Read Message: Scroll the Up/Down Key to select the message.
 Languages: Select the desired language to display the broadcast

message.
Note: Your network operator decides whether the language is
supported or not.

 Channel Settings: You can choose Select, Add, Edit or Delete to

receive the Broadcast information.

20

Call Center

In the standby mode, press left soft key to access Menu > Call Center.

Call history
Master /Slave SIM Missed Calls

With this function, you can check recent missed calls.
Scroll the Up/Down key to select a missed call.
Press OK key to access Missed Call Information, and you can Delete,
Save to Phone book, call, Edit and so on.

Master/Slave SIM Dialed Calls

With this function, you can check recent dialed calls. In this function,
you can Delete, Save to Phone Book, Call, Edit and so on.

Master/Slave SIM Received Calls

With this function, you can check recent received calls. In this function,
you can Delete, Save to Phone Book, Call, Edit and so on.

Delete Master/Slave SIM Call Log

You can delete all records of missed calls, dialed calls or received calls
with this function or Delete all folders drastically.

Master/Slave SIM Call Timers

 Last Call: The last call time can be checked.
 Dialed Calls: The total time for all dialed calls can be checked.
 Received Calls: The total time for all received calls can be checked.
 Reset All: Reset the counters.

Master/Slave SIM Call Cost

 Last Call Cost: You can check the cost of last call.
 Total Cost: You can check the total cost of all calls.
 Reset Cost: You can modify the cost of call, and reset the cost to 0.

PIN2 code is required while modifying.
 Max Cost: You can check and modify the upper limit. PIN2 code is

required while modifying.
 Price per Unit: You can check and modify the call rate. PIN2 code is

required while modifying.

21

Note: This function is related with the SIM card. Some SIM cards don't
support the function. PIN2 is provided from the network operator.
Please consult your network operator to obtain the number.

Master/Slave SIM Text message Counter

 Sent: You can check and clear the number of sent messages.
 Received: You can check and clear the number of received

messages.
Note: This function has nothing to do with the SIM card. The amount of
sent or received messages will not change even if you change the SIM
card.

Master/Slave SIM GPRS Counter

You can check or reset the Last Sent, Last Received, All Sent, All
Received and Reset Counter.

Call settings
Master SIM Call Setting

 Caller ID: You can select Set By Network, Hide ID or Send ID. The

default status is Set by Network.

Note: This function is related with your network. Selecting Hide ID

setting may cause failure to dial. Please test the calling function

before you enable Hide ID.
 Call Waiting:

1> Activate: The mobile phone will connect to the network when

Call Wait is enabled. After a while, the network will take a
response by sending messages to ensure your operation. If Call
Wait is enabled, the network will warn you. At the same time,
another incoming call will display on the screen while the first
call is in process.

2> Deactivate: If you cancel Call Waiting, the network will not warn

you when you are on a call and a new call is coming.

3> Query Status: With this function, you can inquire about the

current status from the network.

22

 Call Divert: This function allows your phone to divert coming calls to

another phone.

1> Divert All Voice Calls: When this function is enabled, all coming

calls will be diverted to another phone. Set it On or Off, the
phone will connect to the network. After a while, the network will
take a response and tell you the result on operation.

2> Divert If Unreachable: When this function is enabled, the

coming call will be diverted to another phone number if the
phone is unreachable.

3> Divert If No Answer: When this function is enabled, the coming

call will be diverted to another phone number if there is no
answer in some time.

4> Divert If Busy: When this function is enabled, the coming call

will be diverted to another phone number if the phone number
you dialed is busy.

5> Divert All Data Calls: You can divert all data calls with the need

of your network operator's support.

6> Cancel All Divert: Use to cancel all diverting functions.
 Call Barring:
This function limits some selected calls. When you configure this
function, you should consult your network operator for the password. If
the password is wrong, the phone will prompt the fault message. After
the desired number is selected, please continue to select On or Off.
After a while, the network will take a response and tell you the result.

1> Outgoing Calls:

 All Calls: When this option is enabled, you cannot make any

calls.

 International Calls: When this option is enabled, you cannot

make any international calls.

 International Calls Except to Home PLMN: When this option

is enabled, you can make only local calls when you are
abroad or dial to the country in which the network provider is.

23

2> Incoming Calls:

 All Calls: When this option is enabled, you cannot make any

calls.

 When Roaming: When this option is enabled, you cannot

receive any incoming calls if you are out of reach of the network
service.

3> Activate All: When this option is enabled, you cannot receive any

incoming calls.

4> Cancel All: Cancel the call barring. It also needs the Call baring

password provided by the network operator.

5> Change Barring Password: Use to modify the Call baring

password. It needs to input the original password before you
modify.

 Line Switching: Switch to Line 1 or Line 2, the default is Line 1.

Note: If Line 2 is selected, making calls from Line 2 depends on the
network operator.

 Closed user group: Press the left soft key to access Group List, and
then select Add to input the group's name. Press the left soft key to
select Done, and then add the number. Press the left key to finish.
Select Option to Edit, Add, Activate, and Deactivate or Delete the
existent group.

Slave SIM Call Setting

 Caller ID: You can select Set By Network, Hide ID or Send ID. The

default status is the Set by Network.

Note: This function is related with your network. Select Hide ID may

cause failure to dial. Please test the calling function before you

enable Hide ID.
 Call Waiting:

1> Activate: The mobile phone will connect to the network when

Call Wait is enabled. After a while, the network will take a
response by sending messages to ensure your operation. If Call
Wait is enabled, the network will warn you. At the same time,

24

another coming call number will display on the screen when the
first call is ongoing and a new call is coming.

2> Deactivate: If you cancel Call Waiting, the network will not warn

you when you are on at call and a new call is coming.

3> Query Status: With this function, you can inquire about the

current status from the network.

 Call Divert: This function allows your phone to divert incoming calls

to another phone.

1> Divert All Voice Calls: When this function is enabled, all

incoming calls will be diverted to another phone. Set it On or Off,
the phone will connect to the network. After a while, the network
will take a response and tell you the result on operation.

2> Divert If Unreachable: When this function is enabled, the

incoming call will be diverted to another phone number if the
phone is unreachable.

3> Divert If No Answer: When this function is enabled, the

incoming call will be diverted to another phone number if there
is no answer in some time.

4> Divert If Busy: When this function is enabled, the incoming call

will be diverted to another phone number if the phone number
you dialed is busy4.

5> Divert All Data Calls: You can divert all data calls with the need

of your network operator's support.

6> Cancel All Divert: Use to cancel all diverting functions.
 Call Barring:
This function makes use of Call Barring to limit some selected calls.
When you configure this function, you should consult your network
operator for the password. If the password is wrong, the phone will
prompt the fault message. After the desired number is selected, please
continue to select On or Off. After a while, the network will take a
response and tell you the result.

1> Outgoing Calls:

25

 All Calls: When this option is enabled, you cannot make any

calls.

 International Calls: When this option is enabled, you cannot

make any international calls.

 International Calls Except to Home PLMN: When this option

is enabled, you can only make local calls when you are abroad
or dial to the country in which the network provider is.

2> Incoming Calls:

 All Calls: When this option is enabled, you cannot make any

calls.

 When Roaming: When this option is enabled, you cannot

receive any incoming calls if you are out of reach of the network
service.

3> Activate All: When this option is enabled, you cannot receive

any incoming calls.

4> Cancel All: Cancel the call barring. It also needs the Call baring

password which is provided by the network operator.

5> Change Barring Password: Use to modify the Call baring

password. It needs to input the original password before you
modify.

 Line Switching: Switch to Line 1 or Line 2, the default is Line 1.

Note: Making calls from Line 2 depends on the network operator.

Advance settings

1) Call Filter

Call Filter: you can select No limit, Receive phonebook, Reject
phonebook, Black list, White list, or Section list. When this is enabled,
you won‟t receive the calls from the numbers entered in list.
Reject List Info: When this is enabled, show you the reject list.

2) Auto Redial

You can set the Auto Redial function On or Off. When you activate auto
redial, the phone will automatically redial the last called number after a
while if you fail to connect to the number. The time for auto redial is up

26

to 10 times. You cannot make any other calls when the Auto Redial is in
process. Press Cancel to end Auto Redial.

3) Speed Dial

Set the status on, and then you can set 8 groups for the speed dial.
(Corresponding number keys are 2 to 9). In the standby mode, press
and hold the number key to dial the corresponding number.

4) Call Time Display

You can set Call Time Display On or Off. The call time will display when
it is activated, .The call time would not display when it is deactivated.

5) Call Time Reminder

In order to save the call cost, this function prompts you to end the call in
time. You can select Off, Single, or Periodic. There is no prompt when
Off is selected. You should enter a specific time between 1 and 3000
seconds when Single is selected. The phone will ring once when the
time is up. You should enter a specific time between 30 and 60 seconds
when Periodic is selected. The phone will ring once automatically at the
specific time before the integral minute is up.

Settings

In the standby mode, press left soft key to access Menu > Settings.

Dual SIM Setting

You can choose one mode as your desire.

Phone Setup
Time and Date

 Set Home City: Select the desired home city.
 Set Time / Date: Enter the current time and date.
 Set Format: Select a time and a date format.

Motion Menu

When you set this feature on, you can replace the wallpaper in the
standby mode by shaking the phone, and you can replace the song it

27

playing when you shaking it; when it is ringing, you can switch into mute
mode by shaking it also you can play given motion game in M-5151.

Schedule Power On / Off

You can set the time for auto power on /off. Do turn the status on before
using that function, and then the time.
Note: Please disable the Schedule Power On function before you board
an airplane.

Language

Select the desired language for the display text. In M-5151 you can
select 4 language options English, Hindi, Bengali, Telgu

Pref. Input Methods

Select the desired input method for the default input method.

Greeting Text

Set On, input words as your greeting text once you switch on the
phone.

Shortcuts

You can set shortcuts for those functions you often use.

Dedicated key

You can configure short cut functions for the Up, Down, Left and Right
key respectively. In the standby mode, press any one of them to access
the appointed function.

Auto update of date and time

It can be set to On or Off.

UART setup

When using this phone for GPRS, select different UART port to decide
whether Master /Slave SIM to be used.
Note: M-5151 doesn‟t support phone as a modem, and USB Mass
Storage feature. However you can use M-5151 for phone as a modem
via Bluetooth function wit the help of DUN profile w.r.t. your laptop/pc
also have this feature and you have a valid GPRS connection from your

28

operator.

Dazzle Ringtone

You like lot of songs and also like to set those all songs to be a ring tone
of your mobile phone? For this you have to change ring tone every time
with new song.
M-5151 gives you the facility of Dazzle/Shuffle Ringtones. Where you
can set up to 10 songs in one time as your ring tone.
Now whenever a new call will come every time a new song will play as
your ring tone.

Misc. Settings

LCD backlight: You can set the LCD backlight.

Display Characteristic

With this function you can configure the basic status of display
characteristics including Wallpaper, Screen saver, Power On Display,
Power Off Display, Main menu style, Show date and time, Show owner
number, Keypad light setting.

Network Setup

Please contact the network operator for the following network service.

Master/Slave SIM Network setup

1. Network Selection
You can choose Automatic or Manual to select the network (Auto is
recommended). When you select Automatic, the phone will make the
preferential selection according to the network where the SIM card
belongs. When you select Manual, you are required to select the same
network as the registered network with the network operator by SIM
card for your use.

2. Preferences
Select the Preferred Networks. The default network is the network
where the SIM card belongs. Select Options to perform the following
operations:
 Add From List: Display all PLMN list.

29

 New: Create a new network and set the network priority.
 Change Priority: Reset the selected Network Priority.
 Delete: Delete the current preferred network.

Security Setup
Master SIM Security Setup

 Master SIM Lock:
You will be asked to input the PIN. It can be configured if the PIN is
correct. If SIM card is set on, you will need to input the PIN every time
you switch on the power . If you enter incorrect PIN three times, you will
be asked to enter PUK. PUK is used to release and modify the locked
PIN. If PUK is not provided or missed, please consult your network
operator.
 Fixed Dial:
If this function is enabled, only phone numbers in the Fixed Dial List can
be dialed. PIN2 is required for this function. Network support is also
required.
Note: You need to enter PIN2 after the phone gets switched on, PIN2
is not required before the phone is switched off. Therefore, please
switch off the phone and switch it on again after configuration, if you
do not want others to change the status of the Fixed Dial.
 Barred Dial:
If this function is activated, the phone numbers in the barred dial list
cannot be dialed. PIN2 is required for the function. Network support is
also required.
 Change Password:
You can change Master SIM PIN1, Master SIM PIN2.
1> Master SIM PIN1

 The original PIN is required before changing the PIN.
 Enter the new PIN. 4-8 numbers can be used for PIN.
 Enter New PIN to ensure the New PIN.

2> Master SIM PIN2

 The original PIN2 is required before changing PIN2.

30

 Enter the new PIN2. 8 figures can be used for PIN2.
 Enter the New PIN2 again to ensure the new PIN2.

Slave SIM Security Setup

 Slave SIM Lock:
You will be asked to input the PIN. It can be configured if the PIN is
correct. If SIM card is set on, you need to input the PIN every time you
switch the power on. If you enter wrong PIN three times, it is asked to
input PUK. PUK is used to release and modify the locked PIN. If PUK is
not provided or missed, please consult your network operator.
 Fixed Dial:
If this function is enabled, only phone numbers in the Fixed Dial List can
be dialed. PIN2 is required for this function. Network support is also
required.
Note: Please enter PIN2 after the phone gets switched on, PIN2 is not
required for switched off the phone. Therefore, please switch off the
phone and switch it on again after configuration, if you do not want
others to change the status of the Fixed Dial.
 Change Password:
You can change Slave SIM PIN and Slave SIM PIN2.
1> Slave SIM PIN

 The original PIN is required before changing the PIN.
 Enter the new PIN. 4-8 numbers can be used for PIN.
 Enter New PIN to ensure the New PIN.

2> Slave SIM PIN2

 The original PIN2 is required before changing PIN2.
 Enter the new PIN2. 8 figures can be used for PIN2.
 Enter the New PIN2 again to ensure the new PIN2.

Phone Lock

You can lock or unlock the phone. Enter the password to activate or
deactivate the phone lock. When the phone is locked, you will be
required to enter the phone password. 4-8 numbers can be used for the
phone password. The default phone password is 1122.

31

Auto Keypad Lock

You can lock/unlock the phone keyboard and set the Key Lock Time
to None, 5 sec, 30 sec, 1 min, and 5 min.

Change Password

You can change phone password and Tracker Password.

1> Phone Password

 The current phone password is required before changing the

phone password.

 Enter the new phone password.
 Enter the new phone password again to ensure the new phone

password.

2> Tracker Password

 The current Tracker password is required before changing the

Tracker password.

 Enter the new Tracker password.
 Enter the new Tracker password again to ensure the new

Tracker password.

Restore Factory Settings

Access Settings to select Restore Factory Settings, and press OK.
All settings can be restored to factory settings with this function. The
default password is 1122.

Media Center

Camera

CMOS camera is built in to your mobile phone. Digital zoom depends
on the picture‟s size. You can press the Up/Down selection key to adjust
the focus.
Select Camera in Multimedia menu to activate the camera, press the
OK key/the number key 0 to take a photo. Press the left soft key to
access the following options:

32

Photos: With this function, you can view, browse style, forward,
rename, delete and do some other operations with these pictures.
Camera Settings: You can configure the basic settings of camera such
as shutter sound, EV, banding and so on.
 EV: You can adjust exposure value to improve the image quality

according to the actual conditions.

 AE meter: You can select Average, Auto, Spot or Weight which the

desired option you want.

 Banding: 50Hz, 60Hz.
 Delay Timer: Off, 5 seconds, 10 seconds, and 15 seconds.

Tip: You can use the selection key repeatedly to select the desired
option.

Image Settings: You can set the size and quality of these images.
Tip: You can use the Left/Right selection key repeatedly to select the

desired option.
 Image Size: You can take and store pictures in various sizes. The

larger the image size is the more memory space will occupy on your
phone‟s memory.

 Image Quality: Normal, High, and Low. Higher quality images will

take up more space.

White Balance: Adjust the color balance of the image. You can make
your photo appear warmer or cooler.

Scene Mode: You can set Auto or Night.
Effect Settings: You can add a distinct appeal to your pictures with the

following effects Normal, Grayscale, Sepia, Sepia Green, Sepia Blue,
Color Invert.
Storage: To set the default storage path.

33

Image Viewer

The Image Viewer provides you with a quick view of the picture
functions. Please refer to the Photos operations of the Camera for
more details.

Video Recorder

You can record videos of special moments with this function. Press OK
key to start/pause record.
Press the left soft key to access Options:

CamCorder Settings:

 Night Mode: You can select to keep the Night Mode On or Off.
 Anti-flicker: 50Hz, 60Hz.

Storage: You can store the Video in phone or T-Flash card.
Restore Default: Video Recorder Parameters will be restored to factory

parameters with this function.
Tip: You can use the Left/Right or Up/Down selection key to select the
desired setting option accordingly. Please refer the section “Camera” for
more details.

Note: The Phone has limited video recording facility. This can record
video up to 600KB in .AVI format with 3 fps(Frame per Seconds)The
size limit of video document is 600KB. When the document exceeds

600KB, you will get a message “Reach Size Limit” and be prompted to

save the document.

Video Player

You can perform the following operations:

 Play: You can play the specified video.
 Send: You can forward the video via Bluetooth.
 Rename: You can rename the specified video.
 Delete: You can delete the specified video.
 Delete All Files: You can delete all videos.

34

 Sort by: You can sort all video files and display them in a new order;

you can choose to Sort By Name, By Type, By Time, By Size and
None.

 Storage: To set the default storage path.


Note: M-5151 support up to 15 fps (Frame Per Second) video play
in .3GP and .MP4 format.



Audio Player

The Play, Stop, Back, Forward functions correspond to the Up, Down,
Left and Right Key respectively. The available music formats. Select
List to access the Play List, and then select Options to perform the
following functions: play, details, add to ringtones, refresh list, settings.
Note: The Audio Player of the phone will automatically play music files
from the My Music folder. You may need to refresh it manually from the
settings in case you have earlier opted for manual refresh settings.
Warning: Make sure that the volume is appropriate for your hearing
while using the audio player.

Sound Recorder

The mobile phone supports WAV, AMR recording formats. You can
record conversations, which may be saved to the Audio folder under
File Manager. If there is a record, press left soft key you can do: Play,
Append (only for amr), Rename, Delete, Delete All files, Use As and
Send.
Note: If a call is coming while recording, the record will abort and the
data will be paused. AMR adopts dynamic compression and provides a
longer recording time than WAV„s while utilizing the same storage
space.

35

FM Radio

You can use your phone to listen to FM radio stations once the original
Headset is plugged into the accessories connector. Select FM Radio in
the Menu to access the radio controls.

 Press the Up key to Power on/ off the FM radio.
 Press the Left/Right key to step down/up to the next frequency.
 Press the “*”/”#” key to adjust radio volume.
 Press Options to access the following options: channel list, manual

input and so on.
Tip: Long press of the Numeric key 0 in idle screen activates the FM
function.

Schedule FM Record

With this function, your phone can record the FM program as the
schedules once the original Headset is plugged into the accessories
connector. You can set On/Off, the date and time, repeat style, channel
settings and record settings.

Melody Composer

The mobile phone enables you to compose your favorite music as the
tune of the incoming call, alarm.
Note: The phone can save multiple tones edited by you according to
the volume of tones.
When the Tune Editing List is blank, you can edit your favorite tunes by
pressing “Add”. After you have finished editing, press Options to select
a music instrument or playing speed to play the editing tunes. You can
also save the editing tunes.
Select the edited music, and press Options to perform the following
operations:

 Play: You can play the specified self-edit tunes.
 Edit: You can edit the specified self-edit tunes.
 Add: You can add new self-edit tunes.

36

Note: A maximum of 150 notes can be edited with a piece of
self-edit tune.

 Rename: You can modify the name of the selected self-edit tune.
 Delete: You can delete the selected self-edit tune.
 Delete All Files: You can delete all self-edit tunes.
 Use As: You can send the self-edit tones to User Profile.
 Send: You can send the self-edit tones to Text Message and

Multimedia Message.
In the window of Tone Editing, press Options to perform the following
operations:

 Play: You can preview the edited tone.
 Play Speed: You can set the playing speed of the current editing

tone.
 Select Instrument: You can select the music instrument playing

the tone.
 Save: You can save the tone.
The rules by which the tone is composed as follows:
0: Insert one pause;
1: Insert Do;
2: Insert Re;
3: Insert Mi;
4: Insert Fa;
5: Insert So;
6: Insert La;
7: Insert Si;
8: Insert a vibration note;
9: Insert a backlight;
*: Modify the playing rhythm of the current tone;
#: Modify the current note with halftone;

↑: Modify the tone of current note (high, middle, low);
↓: Modify the tone of current note (high, middle, low).

37

File Manager

You can use the function to manage all types of files saved in the
Memory card.

1. There are all of files saved in your phone. Press Options you can
select Open, New Folder, Format, Rename, and Details.

2. If the specified one is” Folder”, Press Options you can select „Open,
New Folder, Rename, Delete or Sort by‟.

3. Press Option if the specified item is a file. For different kinds, press
Options, you can select View (Play), Use, Send, Detail, Rename, Copy
or other options.

User profiles

Normal

1. Activate

2. Customize

 Tone Setup: Includes Master/Slave SIM Incoming Call, Power on,

Power off, Master/Slave SIM Message Tone, Keypad. You can
select built-in ring tunes, or the tunes composed by yourself.

 Volume: Includes the volume setting of Ring Tone and Key Tone.

The volume degree is from 1 to 7.

 Alert Type:

 Ring Only: Just ringing, no vibration.
 Vib. Only: Just Vibrating, no ringing.
 Vib. then Ring: Ringing after vibration.
 Silent: No ring or vibration.

 Intelligent Call Alert: You can set On or Off.
 Ring Type:

 Single: Rings once when a call is coming.
 Repeat: Rings continuously when a call is coming.
 Ascending: Rings continuously and the volume increases

gradually.

38

 Extra Tone:

 Warning: If necessary, you will be warned by the prompt tone.
 Error: You will be warned by a tone if you make a mistake.
 Camp On: A prompt tone will be heard after searching the

network successfully.

 Connect: A prompt tone will be heard after the call gets

connected.

 Answer Mode:

 Any Key: Press any key to answer a call (Except of Hang Up

Key and Right Soft Key).

Silent

Please refer to “Normal” for more details.

Note: Press and hold the # key to enable or cancel the silent mode.

Outdoor

Please refer to “Normal” for more details.

Indoor

Please refer to “Normal” for more details.

Headset

Insert the earphone and access the Headset mode automatically. This
mode has no Activate option. Please refer to “Normal” for more details.

Bluetooth

You will enter into Bluetooth mode after you activate the Bluetooth
function. This mode has no Activate option; the detailed operation has
been shown in the “General”.

Power Saving

This is a special profile which increases the usage time of the phone. In
this profile only important functions of the phone will work so the power
consumption of the phone will be minimizes. Please refer to “Normal”
for more details.

39

Organizer

Calendar

You can view and edit the memo of a specified date with this function.

1. View: You can view or edit the daily arrangement of the day.

2. View All: You can view or edit all the daily arrangement of the

day.

3. Add Event: You can select task types: Reminder, Meeting, and

Course.

4. Delete Event: You can select delete entries form All, Overdue,

Spec Period.

5. Jump to Date: Skip to the specified date to view or edit the daily

arrangements of the day.

6. Go To Weekly/Monthly View: Go to the specified date to check

which week/Month it is.

7. Indian Calendar: You can view or edit: Tithi details, Festival list,

Date to tithi, Yearly tithi.

8. Onscreen Display: It can be set to None or Indian.

9. Print: You can print it via Bluetooth.

Tasks

You can View, Add, Edit, Delete, Delete Overdue, Delete All, Send
Vcalendar and Save As File as desired. Start up the Tasks and press
OK. Press Add to access to add a new memo.

Alarm

The mobile phone provides 5 alarms and you can set them as your
need. If you have configured an alarm, an icon indicated that you have
configured the alarm will appear. No icon will show if you don‟t set an
alarm. Select “Edit” to set the current alarm.

Calculator

The calculator can add, subtract, multiply and divide. To use the
calculator:

40

1. Press the # key to enter the decimal point

2. Press the up, down, left and right key and OK key to select ＋, －,

×, ÷, ＝ respectively.

3. Press Clear to delete the figure.

Units Converter

You can make the units conversion for weight and length. Enter the
number into the column, and then press “OK” to get the result.

Currency Converter

You can make currency conversions. Press OK after entering the
exchange rate, and then enter the number of the currency, and press

OK to get the result.

Stopwatch

The stopwatch has two modes - Split Timing and Lap Timing, and you
can view the records of both the modes.

World Clock

Scroll to browse every city‟s time zone in the world map. The related

date and time will display at the bottom of the screen.

Health

Provides the reference of body mass index (height, weight and sex).

Bluetooth

You can establish a wireless connection with other compatible devices
using Bluetooth technology. Such compatible devices include cell
phone, computer, earphone and vehicle parts. For the compatibility of
other devices please consult the manufacturer. You can use Bluetooth
to send pictures, videos, music, notes and voice segments; or establish
a wireless connection with compatible PC (to send files for example).
As the communication between two Bluetooth devices is just wireless,
so it‟s not necessary to keep the mobile phone dead against the other
device. You shall ensure that the distance between two Bluetooth
devices is not more than 10 meters (about 32 feet). However, the

41

Bluetooth connection may be interfered by obstacles like wall or other
electronic devices.
In some circumstances, the application of Bluetooth may be restricted.
Please consult your local authorities or service providers.
Application of Bluetooth technology in your cell phone will accelerate
the consumption of electricity power and thus shorten the service life of
your battery.

Power: select to switch „on‟ or „off‟ Bluetooth.
Inquiry Audio Device: Searching for hand-free devices: After

confirmation, your phone will search for Bluetooth devices and a list of
available devices will be displayed in the screen. Select a Bluetooth
device and input a correct password to establish a security connection.
Note: The initial password of Bluetooth earphone is 0000 or 1122. For
details please contact your device provider.
Remote control: Controls other Bluetooth appliances through
cell-phone far away, based on Bluetooth Technology.
My Device: Search for new devices and show the list of all Bluetooth
devices within the scope of your phone. Select the available device,
press OK and then you have the following options:

 Connect: Enter into service record option after confirmation.
 Rename: Rename a device.
 Delete: Delete a device.
 Delete All: Delete all the devices.
 Service list: Press left soft key to Refresh HID profile, FTP

profile, OPP profile, DUN profile, SPP profile function.

Active Device: Show all devices already connected.
Setting: After selecting, you have the following options:
after select, you have the following options: Visibility, Change Device
name, Authentication, Audio path, Block list, Storage, FTP settings,
Bip settings.

 Visibility: After enabled, other devices can search this device.

42

Note: This function is not available if advanced voice playing

is enabled.

 Change Device name: Show and edit the name of device.
 Authentication: Enabled or disabled.
 Audio path: You can select „Leave‟ in phone or „Forward‟ to

Bluetooth headset.

 FTP setting: Set the path and folder authorities for the share

About: Show detail the Bluetooth serviced provided by this phone.

folder.

Currency Checker

You can turn On/ Off the Currency checker function by long press of “5
Key” on ideal screen mode

Torch light

You can turn On/ Off the Torch light function by long press of “* Key” on
ideal screen mode

Fun Spice

The newly launched Fun corner from Spice Mobiles for its customers.

SpiceGang

It is a wap portal from where user can download Ringtones, Wallpapers,
Animations, Videos and other kind of content.

Step1: Check the GPRS settings for your operator.
Step2: Initiate SpiceGang wap portal to browse and download the

content.
Step3: Charges for download apply as per operator pricing.
Explore the whole world of Entertainment with SpiceGang.

Reuters

Reuters India gives you the latest India, World and Business news and
more. Also, get the latest stock market information along with tools like
the currency converter and weather in your city on your mobile phone.
NOTE: Please ensure that you have GPRS settings in your phone to

43

open Reuters. Contact your operator for GPRS settings.

Ibibo

Now connect with the ibibo community on Spice Mobiles. Go and create
your profile, search for people based on their age, sex & location, make
new friends and send or receive blurbs. Invite your existing friends to
join your new community.
The services pre loaded on Spice Phones are Cool Stuff, Cricket
Update, Free SMS, and Make New Friends.
Please check your GPRS settings before accessing Ibibo.

Voice Zone
Sangeet

Spice Mobiles presents Sangeet Portal – One Touch Access to the
huge library of songs comprising of 17 languages and over 1 lakh
tracks!
Sangeet is a third party application. Use of it is at your sole discretion.
Spice Mobiles disclaims all responsibilities from its usage, whether
express or implied. The IVR codes are owned and provided by third
party and may change without prior notice.

Bhakti Sangeet

Spice Mobiles present Bhakti Sangeet on IVR. Use this portal to listen
to your favorite devotional songs at the click of a button, virtually,
anytime and from anywhere.
Bhakti Sangeet is a third party application. Use of it is at your sole
discretion. Spice Mobiles disclaims all responsibilities from its usage,
whether express or implied. The IVR codes are owned and provided by
third party and may change without prior notice.

Suno Sunao

Spice Mobiles brings SUNO SUNAO to its customers. It gives the
anonymity, thrill, excitement and above that a chance to speak and
listen to the Chat friend!
SUNO SUNAO is a third party application. Use of it is at your sole

44

discretion. Spice Mobiles disclaims all responsibilities from its usage,
whether express or implied. The IVR codes are owned and provided by
third party and may change without prior notice.

Popat

After select, you have the following options:

1. Human Voice Prompt: You can set On or Off. With this function

you can listen any stored no. in the Phone Book.

2. Intelligent Call Alert: You can set On or Off. With this function you

can listen the no. of incoming call.

3. Human Voice tone1: You can On or Off. With this function you can

activate the voice tone for keypad.

MGurujee

MGurujee is India's leading M-Learning portal delivering unique
anytime anywhere mobile phone based learning experience with
access to a wide variety of quality knowledge content from market
leaders.

NOTE: Please check your GPRS settings before accessing MGurujee.

Calculator

The calculator can add, subtract, multiply and divide. To use the
calculator:

4. Press the # key to enter the decimal point

5. Press the up, down, left and right key and OK key to select ＋, －, ×,

÷, ＝ respectively.

6. Press Clear to delete the figure.

Email2SMS

Emergic Email2SMS is a product of Netcore Solutions Pvt. Ltd.
provided by Spice Mobiles. Email2SMS allows you to receive email on
your phone via SMS without GPRS. You can Read, Reply, Compose
and Forward your emails via SMS. This service is only available for
Gmail, Indiatimes and Corporate Account Holders. Spice Mobiles offers
FREE subscription for one month.

45

1. Just send SPICE START <Location> to 575758 to register for
Email2SMS service.
For composing new mail type NEW <Receiver's Email-Id> S: <Subject>
B: <Message> and send it to 575758.

2. For replying to any mail types REPLY <Message-Id> <Message> and
send it to 575758.

3. For replying to all in the mail type REPLY <Message-Id> <Message>
and send it to 575758.

4. For forwarding the mail type FWD <Message-Id> <Receiver's
Email-Id> <Message> and send it to 575758.

5. For reading the remaining part of mail types READ <Message-Id>
and send it to 575758.
NOTE: Message-Id is the number which you get at the end of SMS. i.e.,
01, 02, 03, 04.

For more details contact Customer Support:
Phone: [phone],

Email: [email protected],
Chat ID: [email protected], [email protected],

[email protected]
Disclaimer: For any Third Party application, Spice Mobiles disclaims all
responsibilities from its usage, whether express or implied.

Dazzle Ringtone

Abb Har Bar Naya Gana Bajega! You like lot of songs and also like to
set those all songs to be a ring tone of your mobile phone?? For this
you have to change ring tone every time with new song.
Not anymore. M-4580 gives you the facility of Dazzle/Shuffle Ringtones.
Where you can set up to 10 songs in one time as your ring tone.
Now whenever a new call will come every time a new song will play as
your ring tone.

46

Games

There are several interesting games in the phone. Please refer to
instructions from the game menu for more details.
Tip: The game menu includes Start Game, Game Level, Best Grades
and Game Help.

Others
Call Filter

1) Call Filter

You can select No limit, Receive phonebook, Reject phonebook, Black
list, White list, or Section list. When this is enabled, you won‟t receive
the calls from the numbers entered in list.

2) Reject List Info

When this is enabled, show you the reject list.

Mobile Tracker

Now be sure of your mobile phones with Mobile Tracker offered by
Spice Mobiles. This feature allows users to track their phone if they are
lost or stolen. Switch on Mobile Tracker application and whenever a
new SIM is inserted in your phone you will receive a SMS on pre
defined numbers.

1) Tracker Mode

This function requires your network support. You can set ON or OFF.
When the function ON and the phone change a SIM card, the phone will
sent a message to the number which you set in Fun Spice > Others >
Mobile Tracker > Tracker Number. The message will tell you that
which number is using your phone now. The default password is 1122.

2) Tracker Number

You can set Tracker number.
TIP: This function requires your network support. When you set Tracker
Mode OFF, and then you can set the tracker number you want.

Private Menu

Did some one scan your Personal Messages when you were out? Get
smarter with M-4580's Private Menu advantage. Keep your Phone

47

numbers, SMS and Call Records password protected so that no one
gets to know your secrets. Can Keep 500 Numbers of Phone Book,
SMS up to 200, 20 each of Dialed Calls, Received Calls and Missed
Call Records, your personal notes like different passwords, account nos.
etc (Above all are shared between both Private and Non-private Menu
and for SMS with SIM Card SMS and handset SMS). The default
password is 1122.

Services

STK Service

This service is offered as the SIM card service provided by the network
operator.

WAP

WAP enable you tour around the Internet world easily and pleasantly.
Please follow the steps described as below:

1. Homepage: The default Internet Web Address.

2. Bookmarks: Save the Web address you often use.

3. Recent Pages: Records after you browse the Website.

4. Offline Pages: You can view offline pages which you saved.

5. Input Address: Press the left soft key to access Enter Address, and

then input the web address to go to the Internet.

6. Service Inbox: Messages sent to users from the Web site.

7. Settings: You can configure Select SIM, Profiles, Browser Options,

Service Message Settings, Clear Cache, Clear Cookies and Trusted
Certificates.

Data Account

Press the left soft key to perform the following steps:

1. GSM Data: Edit the GSM account.

2. GPRS: Edit the GPRS account.

48

Fun & Games

There are several interesting games in the phone. Please refer to
instructions from the game menu for more details.
Tip: The game menu includes Start Game, Game Level, Best Grades
and Game Help.

49

IMPORTANT INFORMATION

Use of Passwords

Your mobile phone and SIM card have various passwords. Those
passwords avoid unauthorized use of your phone and SIM card. You
can change PIN, PIN2 and phone password in the “Settings > Security
Setup”.

Phone Code

The Phone code can be used to avoid unauthorized use of your phone.
The factory setting for the phone code is 1122. If phone lock is enabled,
you will be asked to input the phone password when you switch on your
phone.

PIN (4 to 8 digits)

The PIN (Personal Identification Number) code protects your SIM card
from unauthorized use. The PIN code is usually supplied with the SIM
card. When the PIN code request is enabled, you will be asked for the
password i every time the phone gets turned on.
If you enter incorrect PIN three times , the SIM card will be locked and
you will need to use the PUK to unlock it. PUK is usually set by the
network operator.

1. Enter the correct PUK to unlock the SIM card, and then enter the

new PIN and press OK.

2. If you are prompted to enter the new PIN again, enter it and press

OK.

3. If the PUK is correct, the SIM card will be unlocked and the PIN will

be reset.

PUK (8 digits)

The PUK (Personal Unblocking Key) code is required to change a
blocked PIN code. Please contact your network operator for the code.

50

Note: If you enter wrong PUK ten times, the SIM card gets invalid.In
that case,you have toconsult with your network operator for a new SIM
card.

PIN2 (4 to 8 digits)

The PIN2 code, supplied with some SIM card, is used for some
functions, such as Call Cost, Fixed Dial and so on. Please consult your
network operator to confirm whether your SIM card supports those
services or not.
If you enter wrong PIN2 code for three times, the SIM card gets locked
and you will need PUK2 to unlock it.

1. Enter the correct PUK2 to unlock PIN2, and then enter the new PIN2

and press OK.

2. If you are prompted to enter the new PIN2 again, enter it and press

OK.

PUK2 (8 digits)

The PUK2 code, supplied with some SIM card, is required to change a
blocked PIN2 code. It may be supplied with the SIM card. If not, contact
your network operator.
Note: If you enter wrong PUK2 ten times, the SIM card will get invalid.
In that case, you have to consult your network operator for a new SIM
card.

Barring Code

To activate call barring, you need a Barring Code. You can obtain the
password from your service provider.

Battery Information

Charing and Discharging

 The charger is designed to be used in temperatures between 0°C to

40°C.

 Do not charge the phone in wet and damp conditions.
 Use batteries and chargers approved by the Spice.

51

 We strive to produce products in compliance with global

environmental standards

 The charger meets the standard for safety of information technology

equipment and office equipment use. It must be used for this
purpose only.

 Your phone is powered by a rechargeable battery. Full performance

of the battery is achieved only after two or three complete charge
and discharge cycles.

 When the battery level is low, “Low Battery” will be displayed on the

LCD screen. If you have selected Alert Tone (Warning Tone of any
profile in Profiles), the phone will sound the alert tone.

 When a charger is not in use, disconnect it from the power source.

Do not leave the battery connected to a charger for longer than 12
hours, since overcharging may shorten its life.

 Temperature extremes will affect the ability of your battery to charge.

Tips for Battery

 Placing the battery in hot or cold places, such as in a closed car in

summer or winter, will reduce the capacity and lifetime of the battery.

 Do not let the metal contacts on the battery touch another metal

contact. It could short-circuit and damage the battery. Use the
battery only for its intended purpose.

 Do not disassemble or modify the battery by yourself.
 Do not clean the battery with water or any other organic solvent.
 Always keep the battery dry.
 The battery can be charged and discharged many times but it will

wear out as last. When the talk and standby time is obviously shorter
than normal, please change the original battery approved by
manufacturer.

 Do not short-circuit the battery.
 Turn off mobile phone before removing the battery.
 Do not dispose of batteries in fire.

52

 If you smell anything strange from the battery or find that the battery

is overheated, stop using it immediately and contact the authorized
After Service Center in your region.

 If you don‟t use the battery for a long time, please fully charge the

battery before you store it.

Batteries should never be placed in municipal waste. Batteries

must be recycled or disposed off properly. Please follow the
regulations for disposal of batteries.

Usage & Maintenance

To keep your product working well, take a moment to review the
following usage & maintenance tips, which will help you to fulfill any
warranty obligations and to enjoy this product for many years.
 Keep your phone and all its parts and accessories out of children‟s

reach.

 Your products are not water-resistant. Keep it dry. Precipitation,

humidity and liquids contain minerals that will corrode the
connectors.

 Always treat your products with care and keep it in a clean and

dust-free place.

 Do not expose your product to extreme high or low temperatures.

Your phone operates best in temperature between 15 °C and 25°C.
Minimum and maximum temperatures recommended by the
manufacturer are -10°C and 55°C.

 Do not expose your product to open flames or lit tobacco products.
 Do not attempt to disassemble or modify your product.
 Do not drop, throw or try to bend your product.
 Do not paint your product.
 Do not use harsh chemicals, cleaning solvents, or strong detergents

to clean it.

 Do not keep any magnetic thing, like credit cards, near your product.
 If you find any crack on the battery , deformation or anything else,

stop using the battery immediately.

53

 If the electrolyte leaks out and contact your skin or clothes, you

should immediately use soap and clean water to clean it. In case the
electrolyte spatters into your eyes, use clean water to wash your
eyes thoroughly and go to the hospital immediately.

 If your phone or any accessory doesn‟t function normally, please

send them to the nearest authorized service facility. The qualified
personnel will assist you, and if necessary, arrange for service.

Emergency Calls

This phone, like any wireless phone, operates using radio signals,
wireless and landline networks which cannot guarantee connection in
all conditions. Therefore, you should never rely solely upon any
wireless phone for essential communications (e.g. medical
emergencies)
To make an emergency call:
1> Switch on your phone .

Some networks may require that a valid SIM card is properly

inserted in the phone
2> Dial the official emergency number. Emergency numbers vary by

location.
While making an emergency call, please remember to give all
information as particularly as possible. Never disconnect the call until
you are given permission to do so.

54

APPENDIX

Appendix A: Guidance On Entry Methods

This phone provides several input methods which can be used in
editing the Phone Book, Short Messages, Memos, Greetings, Alarms
and other text applications.

The Icons of Input Methods

After entering different kinds of edit windows (including edit phonebook,
short messages. etc.), the icons of input are as follows:

“123”: The Entry method of Numeric appears as: “123”
“ABC”: The entry method of Multitap ABC appears as: “ABC”
“abc”: The entry method of Multiitap abc appears as: “abc”
“eZi ABC”: The entry method of eZiTextSmart ABC appears as:

“eZi ABC”
“eZi abc”: The entry method of eZiText Smart abc appears as: “eZi
abc”

“HI ”：The entry method of Multitap Hindi appears as: “HI”
“BE ”：The entry method of Multitap Bengali appears as: “BE”
“TE”：The entry method of Multitap Telugu appears as: “TE”

How to Switch Between the Input Methods

Press the # key to switch the input methods.
E.g.: If the current input is Smart ABC the screen will show “eZi ABC”.
Press the # key, to go to Smart abc, and the screen will show “eZi abc”.

Numeric, Multitap ABC and Multitap abc Input Methods

Numeric

When the icon of the input method is “123”, press the number keys to

enter the numbers directly.
Multitap ABC and Multitap abc
When the icon is “ABC” or “abc”, press the number keys（2 to 9）
repeatedly until desired letters appear in the text area. Press the

55

number key once for the first letter. Press twice for the second letter. So,
press number keys to reach the desired letter in the same way.
Press 0 key to enter a blank space or “0”.
Note: while using the Numeric entry, please switch to the method of
Multitap ABC and Multitap abc first if a blank space is required, and
then press 0 to enter a blank space.

How to Input Special Symbols

If you want to input special symbols, such as ". ! ? = < >”, Etc., please

following steps as below:
Press the * key to display the symbols. Press the Up/Down, or
Left/Right Key to move the cursor in the symbol table, and select one
symbol. Press the right soft key to cancel the symbols selection.

56

Appendix B: Troubleshooting

Problems

Solutions

Can not
answer or
make a call

Make sure that the phone has been switched on.
Make sure that the battery is charged.
Make sure that the signal intensity is high enough.
Make sure the own number function in the call setting is
system preset or number sending.
Make sure the line switch in call setting is the system
preset line. Check whether you have set up call barring
or fixed dialing or any other safety function.
Check whether you have set up call diverts. Check
whether you have inserted the proper SIM card
correctly.

Low voice

Check if the volume has been set too low.

No ring

Check whether you have set up the” Silent” option.
Check whether the ring volume is not too low.
Move away from a noisy place to check if you can hear
the phone ringing.
Check whether you have set up call diverts.

LCD
unclear

Check whether the contrast has been set too low.

T-Flash
card detect
slowly

Format your T-Flash card with your phone.
Note: To protect your files from getting lost, please take
the backup of important information before
formatting your card.

This section lists some problems that you might meet while using your
phone. If you feel that your phone do not operate normally, please reset
settings first, and then follow Troubleshooting Guide. If you are still
unable to solve problems, please contact the authorized service center
or the store from where you purchased the phone.

57

Appendix C: Available Accessories

Dual Stereo Personal Hands Free Handset

The Dual Stereo Personal Hands Free Handset allows you listen to
music or to make conversations with hands free comfort.

Travel Charger

You can charge the phone with the Travel Charger when you are on the
move.
Note: Please use approved accessories to get the most out of your
phone.

Appendix D: FCC Statement

This device has been tested and found to comply with Part 15 of the
FCC rules. Performance is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

3. Changes or modifications not expressly approved by the

manufacturer or authorized service center could void the user‟s

authority to operate this equipment.