Page 1
PN: 5839003122
Page 2
Spice Mobiles Ltd. ©2010. All rights are reserved. No part of this document may be
reproduced without permission. All trademarks and brand names mentioned in this
publication are property of their respective owners.
“Your device may have preinstalled bookmarks and links for third party internet sites and
may allow you to access third party sites. These are no affiliated with Spice, and Spice does
not endorse or assume liability for them. If you access such sites, take precautions for
security or content.”
“The limited warranty does not cover user manuals or any third party software, settings,
content, data or links, whether included / downloaded in the product, included during
installation, assembly, shipping or any other time in the delivery chain or other wise and in
any way acquired by you. To the extent permitted by applicable law(s), Spice does not
warrant that any Spice software will meet your requirem ents, will work in combination with
any hardware or software applications provided by a third party, that the operations of the
software will be uninterrupted or error free or that any defects in the software are correctable
or will be corrected.”
Protect your environment! We strive to produce products in compliance with the global
environmental standards. Please consult your local authorities for proper disposal.
Note: User’s Manual is just to guide the u ser ab out t he f uncti o nalit y of th e p hone. T his do es
not seem to be any certificate of te chnology. Some functions may very due to modificatio ns
and up gradations of software or due to printing mistake.
Page 3
SAFETY PRECAUTIONS
Please read the following safety guidelines before using your phone.
Do not use wireless phones while driving.
Switch off wireless devices in aircraft. The signal may cause
interference. Using them on aircraft is illegal.
Do not use mobile phones where bl astin g is i n progress. Follow
regulations and rules strictly.
Do not use mobile phones at a refueling point. Don’t use n ear
fuel or chemicals.
Follow regulations or rules in hospi tal and health care facilities.
Switch off the phone near medical equipment.
All wireless devices may get interference that could affect
performance.
Only qualified service personnel can install or repair this device.
Use only approved accessories and batteries.
Use only in normal position. Do not expose your phone to
extreme high temperatures above +60°C（+140°F）. Do not use
anything static to clean your phone.
Ensure the phone is turned on and in service. Enter the
emergency number, then press Pick Up key. Give your location.
Do not end the call until told to do so.
Note: Improper use will invalidate the warrant y! These safety instructions also apply
to original accessories.
Page 4
Table of Content
GENERAL INFORMATION ........................................................1
Antenna....................................................................................................1
Network Service.......................................................................................1
Accessories..............................................................................................1
Privacy .....................................................................................................1
KNOW YOUR MOBILE PHONE ................................................2
Positions of Phone Keys..........................................................................2
Functions of Key s.....................................................................................3
Display Screen.........................................................................................4
Status Icons..............................................................................................5
IMPORTANT INFORMAT ION.....................................................6
Use of Passwords....................................................................................6
Battery Information...................................................................................7
Usage & Maintenance..............................................................................8
Emergency Calls......................................................................................8
GETTING STARTED..................................................................9
Trajectory ball...........................................................................................9
First Call...................................................................................................9
Mounting the SIM Card............................................................................9
Mounting th e T-Flash Card.....................................................................10
Charging the Battery..............................................................................10
Switching Your Phone On/Off.................................................................11
Waken Up Your Phone........................................................................... 11
CALLING..................................................................................12
Making Calls...........................................................................................12
Answering Calls.....................................................................................12
Options in Call........................................................................................12
GUIDE TO MENU OPERATIONS ............................................13
Phone Book............................................................................................13
Messages...............................................................................................13
Call History.............................................................................................16
Page 5
User Profiles...........................................................................................20
Media Center..........................................................................................22
Yahoo!....................................................................................................25
Settings..................................................................................................25
File Manager..........................................................................................28
Snaptu....................................................................................................28
Answer machine.....................................................................................28
Nimbuzz.................................................................................................29
Organizer...............................................................................................29
Bluetooth................................................................................................30
Services .................................................................................................30
Extras.....................................................................................................30
Fun Spice...............................................................................................31
Audio Player...........................................................................................34
Slide Show.............................................................................................35
Menu Manager.......................................................................................35
APPENDIX ...............................................................................36
Appendix A: Guidance on Entry Methods...............................................36
Appendix B: Troubleshooting.................................................................37
Appendix C: FCC Statement..................................................................37
Page 6
1
GENERAL INFORMATION
Antenna
Use of other antenna devices co uld damage your mobile phone and reduce pe rformance.
Your phone has a built-in antenna. Don’t touch the antenna area unnecessarily when the
phone is switched on. Contact with the antenna affects call quality and may cause the phone
to operate at a higher power level than otherwise needed.
Network Service
A lot of features described in this manual are called network service. They are special
services provided by wireless service providers. You should subscribe to these services
from your home service provider and learn instructions on uses before you select the
network you want to use.
Accessories
Li-Ion battery is the manufac turer-approved rechargeable batt ery available for your phone.
Some batteries may perform best after several full charge/discharge cycles.
Use batteries, chargers and accessories approved by the phone manufacturer for using with
this particular model. The use of any other types will invalidate any approval or warranty
applying to the phone, and may be dangerous.
Please consult with your dealer for availability of approved accessories.
Privacy
The shoot or recording of photos, images or sounds privately may be prohibited by law
and/or subject to criminal prosecution. We recommend you to be respo nsible a nd r espectful
of privacy laws when you are taking photos, or doing records.
Page 7
KNOW YOUR MOBILE PHONE
Positions of Phone Keys
1. Earpiece
11. Charger and
accessories connector
2. Left Soft Key/ Slave SIM Call Key 12. Flash light
3. Music shortcut key 13. Speaker
4. Master SIM Call Key 14. Shortcuts key
5. Video Player shortcut key 15. Side key
6. Keypad 16. T-Flash card connecter
7. Trajectory ball 17. Cord hole
8. Right Soft Key 18. Power key
9. Camera shortcut key 19. Camera
10. Hang up key 20. Battery Cover
2
Page 8
Functions of Keys
Key Name Description
Music shortcut
key
In the standby mode, press it to access Audio Player.
Slave SIM
Call Key /
Left Soft Key
Use the left soft key to execute the functions indi cated at
the left of the prompt bar on the screen.
In the standby mode, press it to access main menu.
When the “Master SIM & Slave SIM open” has been
selected, press the left soft key to m ake a call with Sla ve
SIM card after pressing the number key or accessing the
phonebook.
Master SIM
Call Key
Making or answering a call from Master SIM.
In the standby mode, press this key to access the Call
Logs.
Video Player
shortcut key
In the standby mode, press it to access Video Player.
Trajectory
Ball
Scrolling options in the function list or the phone book.
In the edit mode, it is used for moving the cursor.
In the standby mode, press it to activate a specified
function.
Shortcuts key
In the standby mode, press it to access Shortcuts list.
Right Soft
Key
Use the right soft key to execute the functions indicate d
at the right of the prompt bar on the screen.
Camera
shortcut key
In the standby mode, press it to access Camera.
3
Page 9
Call End Key
End an ongoing call.
In the menu mode, press this key to return to the standby
mode and cancel current operations.
Press this key to stop the alarm, when the alarm rings.
Numeric
Keys
Used to enter numbers, letters and some special
characters.
In the standby mode, long press
to activate Silent
mode; long press the
Key to activate/ deactivate
Torch Light; long press the
Key to access Bluetooth;
Long press the key to activate the FM function.
In the edit mode, press the
key to switch the input
methods, press the
Key to display the symbols, press
the
key to switch the uppercase and lowercase.
Display Screen
Your mobile phone has a single screen display, which consists of three main areas:
The First line displays status icons, which indicate t he signal s trength, power of the batter y,
etc.
The Middle lines display text and graphics , including num bers, te xt, animated icons and th e
information you enter.
The Last line displays the currently available operations assigned to the left or right soft key.
4
Page 10
Status Icons
Network Signal
Connecting GPRS and using GPRS
All Voice Calls diverted
Auto Keypad Lock
Alarm Clock is activated
Battery Status
Missed Calls
New Message or Message Memory Full
MMS is busy
Roaming Startup
WAP Message
Audio player
Bluetooth
earphone plugged in
Email
Sound Icons
Ring Only
Vib. Only
Vib. then Ring
Vib. and Ring
Silent
5
Page 11
6
IMPORTANT INFORMATION
Use of Passwords
Your mobile phone and SIM card has various passwords. Those passwords avoid
unauthorized use of your phone and SIM card. You can change PIN, PIN2 and phone
password in the “Settings > Security Settings”
Phone Code
The Phone code can be used to avoid unauthoriz ed use o f yo ur phone. T he fact or y set tings
for the phone code is 1122. If phone lock is enabled, you will be asked t o input the phone
password when you switch on your phone.
PIN (4 to 8 digits)
The PIN (Personal Identification Number) code protects your SIM card from unauthorized
use. The PIN code is usu ally supplied with the SIM card. W hen the PIN code request is
enabled, the password is asked every time the phone is turned on.
Three times wrong PIN entered in a row results in the blocking of, the SIM card. T hen you
will need to use the PUK to unlock it. PUK is usually set by the network operator.
1. Enter the correct PUK to unlock the SIM card, and then enter the new PIN and press OK.
2. If you are prompted to enter the new PIN again, enter it and press OK.
3. If the PUK is correct, the SIM card will be unlocked and the PIN will be reset.
PUK (8 digits)
The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. Please
contact your network operator for the code.
Note: Ten times wrong input in succession, the SIM card will be invalid and you need to
consult your network operator for a new SIM card.
PIN2 (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is used for some functions, such as Call
Cost, Fixed Dial and so on. Plea se consult your network operator to confir m whether your
SIM card supports those services or not.
Entering wrong PIN2 code three times in a row blocks the SIM card and you will be required
to use the PUK2 to unlock it.
1. Enter the correct PUK2 to unlock PIN2, and then enter the new PIN2 and press OK.
2. If you are prompted to enter the new PIN2 again, enter it and press OK.
PUK2 (8 digits)
The PUK2 code, supplied with some SIM cards, is required to change a blocked PIN2 code.
It may be supplied with the SIM card. If not, contact your network operator.
Note: Ten times wrong input in succession, the SIM card will be invalid and you need to
consult with your network operator for a new SIM card.
Barring Code
To activate call barring, you need a Ba rring Code. You can o btain the password from your
service provider.
Page 12
7
Battery Information
Charing and Discharging
The charger is designed to be used in temperatures between 0°C to 40°C.
Do not charge the phone in wet and damp conditions.
Use batteries that are approved by the phone manufacturer and recharge your battery
only with the chargers approved by the manufacturer.
We strive to produce products in compliance with the global environmental standards.
The charger meets the standards for safety of information technology equipment and
office equipment use. It must be used for this purpose only.
Your phone is powered by a rechargeable battery. Full performance of the battery is
achieved only after two or three complete charge and discharge cycles.
W hen the battery level is low, “Low Battery” will be displayed on the LCD screen. If you
have selected Alert Tone (Warning Tone of an y profile in Profiles), the ph one will sound
the alert tone.
When a charger is not in use, disconnect it from the power source. Do not leave the
battery connected to a charger for longer than 12 hours, since overcharging may shorten
its life.
Temperature extremes will affect the ability of your battery to charge.
Tips for Battery
Placing the battery in hot or cold places, such as in a closed car during summer or winter,
will reduce the capacity and lifetime of the battery.
Do not let the metal contacts on the battery touch other metal contacts. It could
short-circuit and damage the battery. Use the battery only for its intended purpose.
Do not disassemble or modify the battery by yourself.
Do not clean the battery with water or any organic solvent.
Always keep the battery dry.
The battery can be charged and discharged many times but it will wear out a last. W hen
the talk and standby time is shorter than normal, please change the original battery
approved by manufacturer.
Do not short-circuit the battery.
Turn off mobile phone before removing the battery.
Do not dispose of batteries in fire.
If you smell anything strange from the battery or find that the battery is over heated, you
should stop using it immediat ely and con tact the authorized After Service Center in your
region.
If you don’t use the battery for a long time, please fully charge the battery before you
store it.
Batteries should never be placed in municipal waste. Batteries must be recycled or
disposed of properly. Please follow local regulations for disposal of batteries.
Page 13
8
Usage & Maintenance
To ensure that your handset works properly, please review the following usage &
maintenance tips. These tips will help you to fulfill any warranty obligations a nd to enjoy
this product for many years.
Keep your phone and all its parts and accessories out of the children’s reach.
Your phone and its parts are not water-resistant. Keep these in dry place. Precipitation,
humidity and liquids contain minerals that will corrode the connectors.
Always treat your products with care and keep it in a clean and dust-free place.
Do not expose your product to extreme high or low temperatu res. Your phone operates
best in temperature between 15 °C and 25°C. Minimum and maximum temperatures
recommended by the manufacturer are -10°C and 55°C.
Do not expose your product to open flames or lit tobacco products.
Do not attempt to disassemble or modify your product. Only authorized personnel should
perform service.
Do not drop, throw or try to bend your product.
Do not paint your product.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it.
Keep anything magnetic, such as credit cards, far away from your product.
If you find that the battery has any crack, deformation or a nything else, you shoul d stop
using the battery immediately.
If the electrolyte leak out and contact you r skin or clothes, you should immediately use
soap and clean water to clean it. In case the electrolyte spatters into your eyes, you must
use the clean water to wash your eyes thoroughly and go to the hospital immediately.
If your phone or any accessory doesn’ t function normally, please send it to the ne arest
authorized service center. The qualified personnel will assist you, and if necessary,
arrange for service.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and landline
networks, which cannot guarantee con ne ction in all con dition s . T herefore, you sho uld ne ver
rely solely upon any wireless phone for essential communications (e.g. medical
emergencies). To make an emergency call:
1> Switch your phone on.
Some networks may require that a valid SIM card is properly inserted in the phone.
2> Dial the official emergency number. Emergency numbers vary by location.
While making an emergency call, please remember to give all information. Never disconnect
the call until you are told to do so.
Page 14
9
GETTING STARTED
Trajectory ball
Slide the trajectory ball towards right to access the submenu and slide towards left to access
the superior menu. Press your trajectory ball to get into th e current menu. I n standby mode,
sliding the ball to left or right enables you to access the shor tcuts icon at the bottom of the
screen. Slide it up and down to see your own interface, such as the time, your operator
name, calendar or just your desktop wallpaper.
First Call
Insert a SIM card (Switch off your phone, and then remove the battery). Enter the area
code and the phone number and press Pick Up Key.
Tip: Before you get started, pleas e insert a valid SIM card in your phone and charge the
battery first.
SIM Card: Please refer to “Mounting the SIM Card” for more reference on installation.
Charging the battery: please refer to “Charging the battery” for more details.
Mounting the SIM Card
Your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (Personal
Unlock Key), PUK2 (Personal Unl ock K e y2), I MSI (Inter natio na l Mobile Sub scribe r I dentit y),
the network information, the phonebook data, SMS (short messages) and other data are
stored in your SIM card.
Note: This particular phone model supports the SIM cards of 1.8V and 3V only.
Some network operators don’t offer PIN2 and PUK2, so functions using those passwords
will be unavailable.
The SIM card and its contacts can be damaged by scratches or bending easily, so be
careful while handling, inserting or removing the card.
Keep all miniature SIM cards out of the children’s reach.
Note: Always make sure that your phone is switched off before you insert or remove the SIM
card, otherwise it may damage the SIM card.
Mounting
Remove the battery cover by sliding it. Insert the SIM card, with the notch at the bottom right
and the gold contacts face down, into the card sl ot. Align the card to the arro w sign as the
following picture shows:
Page 15
Replace the battery and close the cover tightly.
Note:
If the SIM Card is installed improperly or damaged, the prompt words “Insert SIM” will
display on the screen a fter you switch on your phone. Remo ve the SIM Card and follow
the instructions explained above to mount it again.
If “Insert SIM” still appears on the screen after you have inserted the SIM corre ctly, then
please ask the network operator to replace your SIM Card.
If the screen displays that the SIM card is locked permanently, please consult your
network operator.
Mounting the T-Flash Card
Insert the T-Flash card, with the gold contacts facing down, and into the card slot. Align the
card to the arrow sign as the following picture shows:
Charging the Battery
Note: Please keep your phone connector and charger dry.
1. Connect the connector of the travel adapter to the phone.
2. Plug the travel adapter into a proper AC wall outlet.
3. When your phone indicates that the battery is fully charged, please pull the travel adapter
out from the I/O socket of the phone.
Tip:
1. If the batter y is totally empty or not enough, it may take a few minutes for th e charging
indicator to appear on the screen.
2. You can turn on/off, and use the phone while charging.
Warning: Make sure that the standard voltage/power of the place where you charge the
battery matches with the rated voltage/power of our travel adapter.
10
Page 16
Switching Y o ur Phone On/Off
Press and hold Power Key for a few seconds to switch your phone on.
If the phone ask for a phone lock code:
Enter the phone lock code, and press OK.
If the phone ask for a PIN code:
Enter the PIN code, and press OK. The PIN code is usually supplied with the SIM card.
Please consult your network operator for more information.
Access the standby mode.
Press and hold Power Key for a few seconds to switch your phone off.
Waken Up Your Phone
If your phone ask for “Press RSK and SYM to Unlock the keypad”:
Press the right soft key and then press the
key.
11
Page 17
12
CALLING
Making Calls
1. Enter the phone number (with the area code)
2. Press Master SIM Call Key/Slave SIM Call Key to make a call.
3. Press the Hang Up Key to end a call.
Making International Calls
1. Press the +/S Key for the international prefix symbol +.
2. Enter the country code, area code and phone number.
3. Press the Call Key to make a call.
Clear Wrong Enters
Press the right soft key to delete the last character on the scre en. Hold t he right s oft key will
clear all you entered.
Making a call from the Phone Book
1. Press the right soft key to access the Phone Book.
2. Scroll the Up/Down key to select the number you want, and press the Call Key to call the
number.
Last Number Redial
1. In the standby mode, press the Pick Up Key to access the Call Logs.
2. Slide your tr ajectory ball Up/Down to reach the desired number or name and press the
Call Key.
Speed Dialing
You can save 8 Speed Dial Numbers you often dial to positions titled with number keys from
“2” to “9” respectively. Select “Phonebook > Options > Phonebook settings > Speed dial
> Set Number”, and then set “Status” on. In the standby mode, press a nd hold th e number
key to dial the corresponding number.
Adjusting the Sound Volume
During a call, you can press the side Key to adjust the earpiece volume.
Answering Calls
1. To answer an incoming call, press the Call Key.
2. To end or reject an incoming/ongoing call, press the Hang Up Key.
Tip: If the caller can be identified, the screen will display the caller’s name. If the caller can’t
be identified, the screen will only display the caller’s number.
Options in Call
Your phone provides a number of functions that you can use during a call.
During a call, you can access Hold/End single call, New Call, Phone Book, Messages,
Sound Recorder and other functions.
Page 18
GUIDE TO MENU OPERATIONS
All function options about the mobile phon e are listed as belo w with brief description s. Slide
your trajectory ball right and left to select the icon
of main menu.
Phone Book
You can fast locate the number of the pe rson you want to contact. Please enter the initial
alphabets of the person’s name, and related reco rds of the co ntacts will be displayed in the
middle of the screen. You can locate your records by sliding your trajector y ball up or down
and pressing it, and then you can view, send SMS/ MMS, call and so on. Slide your
trajectory ball left and right and access the caller groups feature.
Messages
You can use this function only if your network operator support this service.
SMS
Smart SMS Services
With this function you can learn new message functio ns, such as Message Improve, Smart
Delete, Sort message, SMS search, and so on.
Write Message
You can edit the SMS.
Inbox
The phone will prompt you when you receive a new message.
Drafts
In the Drafts, please select Options, and then you can send from Master /Slave SI M, edit
and some other operations.
Outbox
This function is used to check messages in outbox.
Trash
This function is used to check messages send by the people who are in your blacklist.
Templates
Your phone saves m essages both for SMS in common use. You can edit, remove or write
message.
SMS Settings
You can configure the default information about SMS properties.
MMS
Write Message
You can edit the MMS message.
13
Page 19
14
Inbox
The phone will prompt you when you receive a new MMS.
Outbox
This function is used to check MMS in outbox.
Drafts
This function is used to check messages in drafts.
Templates
Your phone saves m essages both for MMS in commo n use. You can view, write message,
properties.
MMS Settings
You can configure the default information about MMS properties.
E-mail
This function enables you to receive and send emails supported not only by WAP but also
POP3, IMAP4 and any other ordinar y E-mail server. Ple ase read the following information
carefully before using the function:
Email: Please log on some Internet web to apply for an email account. That email account is
just the "Email" referred in your manual. It belongs to the email server computer system
provided from the network operator. Emails you received and sent are tra nsferred by that
email server.
Email Server: It is a computer that s upplies the email service from the network operator.
Please consult your network operator to obtain the server name. POP3 and IMAP are
commonly used servers:
1. POP3: It is a client/server protocol in which e-mail is re ceived and held for you by
your Internet server. Once you connect the web and enable t he email, your phone
will automatically download the new email from POP3 email server to the phone's
inbox, and then delete those emails from the server. If you want to save those emails,
please select the "Leave a copy of messages on server" option in "Email Setting".
2. IMAP: (Internet Message Access Protocol) is a standard protocol for accessing
e-mail from your local server. IMAP provides the user more capabilities for retaining
e-mail on the server and for organizing it in folders on the server. IMAP can be
thought of as a remote file server.
Note: Please consult your network operator to ensure which type your email is.
User Name: The name you en ter when you apply for t he email account. W hen you log on
the email, the server should verify your identity.
Password: The code you enter when you apply for the email account. The email server will
verify whether you are authentic user for the email account or not according to the user
name and password you input.
Email Address: This is the address used in Internet. According to the address, people send
emails to your mailbox. The address is assigned by the system when you apply the email, so
you can’t modify the address.
Send and Receive
You can read, send and receive emails.
Page 20
Write Email
To: edit the receiver E-mail address.
CC: Other e-mail addresses to whom you want to send the e-mail at the same time.
BCC: Other e-mail addresses to whom you want to send the e-mail at the same
time secretly.
Subject: edit the Subject of the E-mail.
Attachment: attach 3 files saved in the phone. The default mail size is up to 90K.
Priority: you can select Normal, Low or High.
Content: enter the text and press “Ctrl” Key to switch input methods.
When you select Done, you can do the following operations:
− Send: to send the email.
− Send and Save: to send and save the sent mail.
− Save to Drafts: to save the email in Drafts without sending it out
− Quit without Saving: to exit the Email Option without saving the email.
Inbox
All received emails are displayed in the inbox, and the icon
means the email is unread.
Use the Down/Up key to scroll the cursor to check the list.. If the email ha s been read, the
icon will change to the read icon. Please press the left soft key to access Option, and follow
steps described as below:
Reply: to reply back to the sender.
Reply to all: to reply to all the senders.
Forward: to forward this email to others.
Delete: to delete this email.
Outbox
In the Outbox, Select Options, and then you can View or select other operations.
Sent
After the email has been sent successfully, you will be asked to save the email into the Sent
or not. Please refer to the Unsent for more details.
Drafts
Emails in Inbox, Sent or Unsent a nd the email unfinished can all be sa ved into the Drafts.
Please select Option, and then you can Edit, Mark as Deleted or Delete.
Clear Mailbox
Use the function to delete emails in Inbox, Outbox, Sent, Drafts and all mailboxes
respectively.
Delete marked Emails
Use the function to delete emails with the deleted mark in Inbox, Outbox, Sent, Drafts
respectively, or Delete all mailboxes drastically.
Email Accounts
Please select one mode from them. After you edit the mode, please activate it to use the
E-mail function.
1> E-Mail Address: user defined
2> Display Name: user defined
15
Page 21
16
3> Username: user defined
4> Password: user defined
5> Outgoing Server: user defined
6> Incoming Server: user defined
7> Advanced Settings:
Account Setting:
1> Account Name: user defined
2> Data Account: user defined
3> Protocol: POP3
4> Check Interval: user defined
5> Download Size: user defined( 204800, max)
6> Retrieve amount: user defined( 50, max)
7> Reply to address: user defined
Outgoing Server:
1> Outgoing Port: 25
2> Authentication: user defined
Incoming Server:
1> Incoming port: 110
2> Download Options: user defined
3> Copy on Server: user defined
4> Del server mail: user defined
Signature: You can set Auto Signature, Signature Image and Signature Text.
Templates
You mobile phone saves various templates that are commonly used.
Tip: The word “user defined” may indicate what you enter or select. You should consider the
local network conditions and consult your network operator and the local dealer for more
information.
Broadcast Message
This network service enables you to receive all kind of text messages, such as weather
reports or transportation information. Ther e are se veral net works who pro vide this s ervice. .
Please consult your network operator for more reference.
Receive Mode: Turn on or off the Cell Broadcast.
Read Message: Scroll the Up/Down Key to select the message.
Languages: Select the desired language to display the broadcast message.
Note: Your network operator decides whether the language is supported or not.
Channel Settings: You can choose Selec t, Add, Edit or Delete to recei ve the Broad cast
information.
Call History
In the standby mode, press left soft key to access Menu > Call History.
Page 22
17
Call history
Master /Slave SIM Call history
Missed Calls
With this function, you can check recent missed calls.
Dialed Calls
With this function, you can check recent dialed calls.
Received Calls
With this function, you can check recent received calls.
Delete Call Logs
You can delete all records of mi ssed calls, dialed c alls or received calls with this function or
Delete all folders drastically.
Call Timers
Last Call: The last call time can be checked.
Dialed Calls: The total time for all dialed calls can be checked.
Received Calls: The total time for all received calls can be checked.
Reset All: Reset the counters.
Call Cost
Last Call Cost: You can check the cost of last call.
Total Cost: You can check the total cost of all calls.
Reset Cost: You can modif y the cost of call, and reset the cost to 0. PIN2 code is required
while modifying.
Max Cost: You can check and modify the upper limit. PIN2 code is required while modifying.
Price per Unit: You can check and modify the call rate. PIN2 code is required while
modifying.
Note: This function is related to the SI M card. Some SIM cards don't support the function .
PIN2 is provided from the net work operator. Please consult your network oper ator to obtai n
the number.
Text message Counter
Sent: You can check and clear the number of sent messages.
Received: You can check and clear the number of received messages.
Note: This function has nothing to do with the SIM card. The amount of sent or received
messages will not change even if you change the SIM card.
GPRS Counter
You can check or reset the Last Sent, Last Received, All Sent, All Received and Reset
Counter.
Call settings
Master SIM Call Settings
Caller ID: You can select Set By Network , Hide ID or Send ID. The default s tatus is Set
by Network.
Page 23
18
Note: This function is related with your n etwork. Selecting Hide ID setting may cause
failure to dial. Please test the calling function before you enable Hide ID.
Call Waiting:
1> Activate: The mobile phone will connect to the net work when Call Wait is enabled.
After a while, the network will take a response by sending messages to ensure your
operation. If Call Wait is enabled, the network will warn you. At the same time,
another incoming call will display on the screen while the first call is in process.
2> Deactivate: If you cancel Call Waiting, the net work will not warn you when you ar e
on a call and a new call is coming.
3> Query Status: With this function, you can inquire about th e c u rrent s tatus from the
network.
Call Divert: This function allows your phone to divert coming calls to another phone.
1> Divert All Voice Calls: When this function is enabled, all coming calls will be
diverted to another phone. Set it On or Off, the phone will connect to the network.
After a while, the network will take a response and tell you the result on operation.
2> Divert If Unreachable: When this function is enabled, the coming call will be
diverted to another phone number if the phone is unreachable.
3> Divert If No Answer: When this function is enabled, the coming call will be diverted
to another phone number if there is no answer in some time.
4> Divert If Busy: When this function is enabled, the coming call will be di verted to
another phone number if the phone number you dialed is busy.
5> Divert All Data Calls: You can divert all data calls with the n eed of your network
operator's support.
6> Cancel All Divert: Use to cancel all diverting functions.
Call Barring:
This function limits some selected calls. When you configure this function, you should
consult your network operator for the password. If the password is wrong, the phone will
prompt the fault message. After the desired number is sele cted, please continue to select
On or Off. After a while, the network will take a response and tell you the result.
1> Outgoing Calls:
− All Calls: When this option is enabled, you cannot make any calls.
− International Calls: When this option is enabled, you cannot make any
international calls.
− International Calls Except to Home PLMN: When this option is enabled, you
can make only local calls when you are a broad or dial to the countr y in which the
network provider is.
2> Incoming Calls:
− All Calls: When this option is enabled, you cannot make any calls.
− When Roaming: When this option i s enabled, you cannot receive any incoming
calls if you are out of reach of the network service.
3> Activate All: When this option is enabled, you cannot receive any incoming calls.
Page 24
19
4> Cancel All: Cancel the call barring. It also needs the Call baring password provided by
the network operator.
5> Change Barring Password: Use to modify the Call baring password. It needs to input
the original password before you modify.
Line Switching: Switch to Line 1 or Line 2, the default is Line 1.
Note: If Line 2 is selected, making calls from Line 2 depends on the network operator.
Closed user group: Press the le ft soft key to access Group List, and then select Add to
input the group's name. Press the left soft key to select Done, and then add the number.
Press the left key to finish. Select Option to Edit, Add, Activate, and Deactivate or Delete the
existent group.
Slave SIM Call Settings
Caller ID: You can select Set By Net work, Hide ID or Send ID. T he default status is the
Set by Network.
Note: This function is related with your network. Select Hide ID may cause failure to dial.
Please test the calling function before you enable Hide ID.
Call Waiting:
1> Activate: The mobile phone will connect to the network when Call Wait is enabled.
After a while, the network will take a response by sending messages to ensure
your operation. If Call Wait is enabled, the network will warn you. At the same time,
another coming call number will display on the screen when the first call is ongoing
and a new call is coming.
2> Deactivate: If you cancel Call Waiting, the network will not warn you when you are
on at call and a new call is coming.
3> Query Status: With this function, you can inquire about the current status from the
network.
Call Divert: This function allows your phone to divert incoming calls to another phone.
1> Divert All Voice Calls: When this function is enabled, all incoming calls will be
diverted to another phone. Set it On or Off, the phone will con nect to the network.
After a while, the network will take a response and tell you the result on operation.
2> Divert If Unreachable: When this function is enabled, the incoming call will be
diverted to another phone number if the phone is unreachable.
3> Divert If No Answer: When this function is enabled, the incoming call will be
diverted to another phone number if there is no answer in some time.
4> Divert If Busy: W hen this functi on is ena bled, the in coming c all will be di verted t o
another phone number if the phone number you dialed is busy4.
5> Divert All Data Calls: You can divert all data calls with the need of your network
operator's support.
6> Cancel All Divert: Use to cancel all diverting functions.
Call Barring:
This function makes use of Call Barring to limit some selected calls. When you configure this
function, you should consult your network operator for the password. If the password is
wrong, the phone will prompt the fault message. After the desired number is selected,
Page 25
20
please continue to select On or Off. After a while, the network will take a response and tell
you the result.
1> Outgoing Calls:
− All Calls: When this option is enabled, you cannot make any calls.
− International Calls: When this option is enabled, you cannot make any
international calls.
− International Calls Except to Home PLMN: When this option is enabled, you
can only make local calls when you are a broad or dial to the countr y in which the
network provider is.
2> Incoming Calls:
− All Calls: When this option is enabled, you cannot make any calls.
− When Roaming: When this option i s enabled, you cannot receive any incoming
calls if you are out of reach of the network service.
3> Activate All: When this option is enabled, you cannot receive any incoming calls.
4> Cancel All: Cancel the call barring. It also needs the Call baring password which is
provided by the network operator.
5> Change Barring Password: Use to modify the Call baring password. It needs to
input the original password before you modify.
Line Switching: Switch to Line 1 or Line 2, the default is Line 1.
Note: If Line 2 is selected, making calls from Line 2 depends on the network operator.
Advance settings
1) Auto Redial
You can set the Auto Redial function On or Off. When you activate auto redial, the phone will
automatically redial the last c alled num ber after a while if you fail to con nect to the number.
The time for auto redial is up to 10 times. You cannot make a ny other calls when the Auto
Redial is in process. Press Cancel to end Auto Redial.
2) Background sound
You can set the background sound when you are calling.
3) Call Time Display
You can set Call Time Display On or Off. The call time will display when it is activated, .The
call time would not display when it is deactivated.
4) Call Time Reminder
In order to save the call cost, this function prompts you to end the call in time. You can select
Off, Single, or Periodic. There is no prompt when Off is selected. You should enter a specific
time between 1 and 3000 seconds when Single is selected. T he phone will ring once when
the time is up. You should enter a specific time between 30 and 60 seconds when Periodic is
selected. The phone will ring once automatically at the specific time before the integral
minute is up.
5) Auto Call Disconnect
You can set ON/ OFF, and set a time (1~9999s) as your desire.
User Profiles
Page 26
General
1. Activate
2. Customize
Tone Settings: Includes Master/Slave SIM Incoming Call, Power on, Power off,
Master/Slave SIM Message, Keypad. You can select built-in ring tunes, or the tunes
composed by yourself.
Volume: Includes the volume s etting o f R ing Tone and Key Tone. The volume degree is
from 1 to 7.
Alert Type:
− Ring Only: Just ringing, no vibration.
− Vib. Only: Just Vibrating, no ringing.
− Vib. and Ring: Ringing and vibration.
− Vib. then Ring: Ringing after vibration.
− Silent: No ring or vibration.
Ring Type:
− Single: Rings once when a call is coming.
− Repeat: Rings continuously when a call is coming.
− Ascending: Rings continuously and the volume increases gradually.
Extra Tone:
− Warning: If necessary, you will be warned by the prompt tone.
− Error: You will be warned by a tone if you make a mistake.
− Camp On: A prompt tone will be heard after searching the network successfully.
− Connect: A prompt tone will be heard after the call gets connected.
Answer Mode:
− Any Key: Press any ke y to answer a call (Except of Hang Up Key and Right Soft
Key).
Silent
Please refer to “General” for more details.
Note: Press and hold the key to enable or cancel the silent mode.
Outdoor
Please refer to “General” for more details.
Indoor
Please refer to “General” for more details.
Headset
Insert the earphone and access the Headset mode automatically. This mode has no Activate
option. Please refer to “General” for more details.
21
Page 27
Bluetooth
You will enter into Bl uetooth mode after you acti vate the Bluetooth fu nction. This mode h as
no Activate option; the detailed operation has been shown in the “General”.
Power Saving
This is a special profile which increases the usage time of the phone. In this profile only
important functions of the phone will wo rk so the power consumption of the phone will be
minimizes.
Note: Insert the earphone to access the Headset mode automatically. This mode has no
Activate option. Long press the key to enable or cancel the silent mode. In the Silent
mode, you can not hear any sounds except the vibration indicates a call or a message is
coming.
Media Center
Java
Java
You can download th e latest Java games and applications f rom the Internet. Please follow
the steps described below to download the application software (the web address) :
1> In the standby mode, select Menu > Services > Internet Ser vice > Bookmarks. You
should input the web address and name it.
2> To connect to the internet, select Option > Go to.
3> Please choose your favorite application software, and then select Option > Go to.
4> Your phone will ask you download it or n ot, with their name, version number, type,
and size.
5> Select “Yes”, and then you should select where to save that a pplication file. Pho ne is
recommended.
6> These downloaded games and applications are automatically saved to the Java.
Select a Java game or an applicat ion and then press t he OK k ey to run it. You can view the
details of installed games or applications, remove them from your device, and specify
installation settings.
Warning: Install and use applications and other software from trusted sources only.
Java Settings
This function includes settings of Java Audio, Java Vibration, Select SIM, and so on. You
can configure those options as desired.
Java Default Security
There are 4 options you can set: Third Party, Untrusted domain, Restore Default and
Domain Options. For Third Party and Untr usted domain, you can defin e which funct ions the
Java application can access. The value that you can set for each functionally depends upon
the protection domain of the software package.
22
Page 28
23
− Network access: Create a data connection to the network
− Auto Invocation: Open the application automatically.
− Messaging: Send messages.
− Multimedia: Capture images or record videos or sound.
− Read user data: Read your calendar entries, contacts, or any other personal data.
− Write user data: Add personal data, such as entries to Contacts.
− Local connectivity: set Prompt at first, Prompt once, Never, Prompt always.
After you finished settings, please select Restore Settings to save.
Camera
Select Camera in Media center menu to activate the camera, press the trajectory ball to
take a photo. Press the left soft key to access the following options:
Photos: With this function, you can view, browse style, forward, rename, delete and do
some other operations with these pictures.
Camera Settings: You can configure the basic settings of camera.
− Led Highlight: You can set On or Off.
− Shutter Sound: Off, Sound1, Sound2, Sound3.
− EV: You can adjust exposure value to improve the image quality according to the actual
conditions.
− Contrast: High, Medium, Low.
− Anti-Flicker: 50Hz, 60Hz.
− Delay Timer: Off, 5 seconds, 10 seconds, and 15 seconds.
− Cont. Shot: Off, 1 Shot, 3 Shot.
Tip: You can use the selection key repeatedly to select the desired option.
Image Settings: You can set the size and quality of these images.
Tip: You can use the Left/Right selection key repeatedly to select the desired option.
− Image Size: Y ou can take and store pictures in various sizes. The larger the image size
is the more memory space will occupy on your phone’s memory.
− Image Quality: Normal, Good, and Low. Higher quality images will take up more
space.
White Balance: Adjust the color balanc e of the image. You can make your photo appear
warmer or cooler.
Scene Mode: You can set Auto or Night.
Effect settings: To set special shot effect.
Storage: To set the default storage path.
Restore Default: Camera Parameters will be restored to factory parameters with this
function.
Page 29
24
Image Viewer
The Image Viewer provides you with a quick view of the picture functions. Please refer to the
Photos operations of the Camera for more details.
Sound Recorder
The mobile phone supports 3 recording formats: WAV, AWB and AMR. You can record
conversations, which may be saved to the Audio folder under File Manager. If there is a
record, press the left soft key you can select: New Record, Play, Append (only for AMR),
Rename, Delete, and so on.
Video Player
You can perform the following operations:
Play: You can play the specified video.
Use as: You can set the video as your screen saver, power on display and power off display
and caller video.
Send: You can forward the video to Bluetooth and so on.
Rename: You can rename the specified video.
Delete: You can delete the specified video.
Delete All Files: You can delete all videos.
Sort by: You can sort your videos by Name, Type, Time and so on.
Storage: To set the default storage path.
Video Recorder
You can record videos of special moments with this function. Press trajectory ball to
start/pause record.
Press the left soft key to access Options:
Camcorder Settings:
− Led Highlight: You can set On or Off.
− EV: You can a djust e xposure value to imp rove the video qualit y accordi ng to t he ac tua l
conditions.
− Night Mode: You can set On or Off.
− Anti-flicker: 50Hz, 60Hz.
Video Settings: You can set the quality of the videos.
White Balance: Adjust the color balance of the video. You can make your video appear
warmer or cooler.
Effect settings: To set special shot effect.
Storage: You can store the Video in phone or T-Flash card.
Restore Default: Video Recorder Parameters will be restored to factory parameters with
this function.
Tip: You can use the Left/Right or Up/Down selection key to select the desired setting option
accordingly. Please refer the section “Camera” for more details.
Page 30
Photo Editor
With this function, you can edit your photos as you want.
FM
You can use your ph one to listen to FM radio s tations once the original Headset i s plugged
into the accessories connector.
Tip: Long press the
key in the standby mode to activate the FM function.
Schedule FM Record
With this function, your phone can record the FM program as the schedules once the original
Headset is plugged into the accessories connector. You can set Off or On, the date and time,
repeat style, channel settings and record settings.
Ebook reader
You can read E-book with "*.TXT" format which saved in your phone or memory card.
Games
There are several interesting games and Motion games in the phone. Please refer to
instructions from the menu for more details.
Tip: The game menu includes Start Game, Game Level, Best Grades and Game Help.
Yahoo!
Yahoo zon e allows you to access Yahoo, Mail, Ne ws, Finance, Astrology, Search, Movies,
and Flickr.
Settings
Multi SIM Settings
You can choose one mode as your desire.
Phone Settings
Time and Date
Set Home City: Select the desired home city.
Set Time / Date: Enter the current time and date.
Set Format: Select a time and a date format.
Update with Time Zone: You can set On or Off.
Schedule Power On/Off: You can set the time for auto power on/off.
Language: Select the desired language for the display text.
Pref. Input Methods: Select the desired input method for the default input method.
25
Page 31
26
Display Settings: You can confi gure the wallpaper, screen saver, po wer on display, power
off display, smart desktop, main menu effect, and so on.
Themes: You can choose your theme as you want.
Dazzle ringtone: Abb Har Bar Na ya Gan a Bajega ! You like lot of songs and also lik e to set
those all songs to be a ring tone of your mobile phone?? For this you ha ve to change ring
tone every time with new song.
Not anymore. Qt-65 gives you the facility of Dazzle/Shuffle Ringtones.
You can set up to 10 songs in one time as your ring tone.
Now whenever a new call will come every time a new song will play as your ring tone.
Motion Sensor: In this function you can set change your wallpaper, music and mute
incoming call by shaking your phone.
Greeting Text: Set the states on, greetings will display when power on.
Shortcuts: You can set 10 functions as your shortcuts.
Dedicated Key: You can configure short cut functions for the Up, Do wn, Left and Right ke y
respectively.
Note: Need to close Display Settings > Smart Desktop, may use the Dedicated Key
function.
Auto Update of Date and Time: It can be set to ON or OFF. (Network Service)
UART Settings: When using this phone for GPRS, select different UART port to decide
whether Master /Slave SIM to be used.
LCD Backlight: You can set the time and the brightness of your LCD backlight.
Jog Ball Setting: You can set High, Medium or Low.
Network Settings
Please contact the network operator for the following network service.
Master/Slave SIM Network setup
1. Network Selection
You can choose Aut omatic or Manual to select t he network (Auto is recomme nded). When
you select Automatic, the phone will make the preferential selection according to the
network where the SIM card belongs. W hen you select Manual, you are required to select
the same network as the registered net work with the network o perator by SIM card f or your
use.
2. Preferences
Select the Preferred Networks. The default network is the network where the SIM card
belongs. Select Options to perform the following operations:
Add From List: Display all PLMN list.
New: Create a new network and set the network priority.
Change Priority: Reset the selected Network Priority.
Delete: Delete the current preferred network.
Page 32
27
Security Settings
Master SIM Security Settings
Master SIM Lock:
You will be asked to input the PIN. It can be configured if the PIN is correct. If SIM card is set
on, you will need to input the PIN every time you switch on th e power. If you enter incorrect
PIN three times, you will be asked to enter PUK. PUK is used to release and modify the
locked PIN. If PUK is not provided or missed, please consult your network operator.
Fixed Dial:
If this function is enabled, onl y phone numbers in the Fixed Dial List can be dialed. PIN2 i s
required for this function. Network support is also required.
Note: You need to e nter PIN 2 a fter the phone g ets switc hed o n; PIN2 is n ot require d before
the phone is switched off. Therefore, please switch off the phone and switch it on again after
configuration, if you do not want others to change the status of the Fixed Dial.
Barred Dial:
If this function is activated, the phone nu mbers in the barred dial list can not be dia led. PIN 2
is required for the function. Network support is also required.
Change Password:
You can change Master SIM PIN1, and Master SIM PIN2.
Slave SIM Security Settings
Slave SIM Lock:
You will be asked to input the PIN. It can be configured if the PIN is correct. If SIM card is set
on, you need to input the PIN every time you switch the power on. If you enter wrong PIN
three times, it is asked to input PUK. PUK is used to release and modify the locked PIN. If
PUK is not provided or missed, please consult your network operator.
Fixed Dial:
If this function is enabled, onl y phone numbers in the Fixed Dial List can be dialed. PIN2 i s
required for this function. Network support is also required.
Note: Please enter PIN2 after the phone gets switched on, PIN2 is not required for switched
off the phone. Therefore, please switch off the phone and switch it on again after
configuration, if you do not want others to change the status of the Fixed Dial.
Change Password:
You can change Slave SIM PIN and Slave SIM PIN2.
Phone Lock
You can lock or u nlock the phone. Enter the password to a ctivate or deactivate the phone
lock. When the phone is locked, you will be required to enter the phone password. 4-8
numbers can be used for the phone password. The default phone password is 1122.
Auto Keypad Lock
You can lock/unlock the phone keyboard and set the Key Lock Time to None, 5 sec, 30 sec.
Change Password
You can change phone password, Tracker Password and Change PIM Lock Password.
1> Phone Password
− The current phone password is required before changing the phone password.
Page 33
28
− Enter the new phone password.
− Enter the new phone password again to ensure the new phone password.
2> Tracker Password
− The current Tracker password is required before changing the Tracker password.
− Enter the new Tracker password.
− Enter the new Tracker password again to ensure the new Tracker password.
3> Change PIM Lock Password
− The current PIM Lock password is required before changing the PIM Lock
password.
− Enter the new PIM Lock password.
− Enter the new PIM Lock password again to ensure the new PIM Lock password.
Note: The default password is 1122.
Restore Factory Settings
Access Settings to select Restore Factory Settings, and press OK. All settings can be
restored to factory settings with this function. The default password is 1122.
File Manager
You can use various functions to manage all type of files saved in the Memory card or
Phone.
Snaptu
Now you can enjoy enjoy the best new mobile apps easily and quickly with the help of
Snaptu in your phone. It is a all-in-one application, which enables you to access Twitter,
Facebook, Flickr, Picasa, News, AccuWeather, Sports (Cricket, Soccer...) Movies, Sudoku
and much more swiftly.
You require GPRS connection to use thi s feature. Please contact your operator for GPRS
activation.
Answer machine
This function supports a new auto incoming call answer for you. It can take recor d of your
missing calls.
Leaving messages
If you have some leaving messages, you can select play, delete and so on.
Settings
You can set the states of the answer machine.
Page 34
Tip: If you set the states of Remote access option on, you can listen your leaving messages..
You only need to call your own phone number and then press the “Hot key” and “password”,
and then you can get the information. The default password is “1122”.
Nimbuzz
Nimbuzz, another path-breaking innovation is available exclusively to the users of Spice
Mobiles. Nimbuzz is a common IM platform that allows one to chat, message and send files
on the move. This service is common for most of the commonly used IM portals including
skype, MSN, yahoo, ICQ, AIM, Google talk – one log-in, one contact list for all accounts.
Please check your GPRS settings before accessing Nimbuzz
Organizer
Calendar
You can view and edit the memo of a specified date with this function.
1. View: You can view or edit the daily arrangement of the day.
2. View All: You can view or edit all the daily arrangement of the day.
3. Add Event: You can select task types: Reminder, Meeting, and Course.
4. Delete Event: You can select delete entries form All, Overdue, Spec Period.
5. Jump to Date: Skip to the specified date to view or edit the d aily arrangements of the
day.
6. Go To Weekl y/Monthly View: Go to the specified date to che ck which week/Month it
is.
7. Hijri Info: You can view or edit: Day Details, Festivals, Date Correction.
8. Indian Calendar: You can view or edit: Tithi details, Festival list, Date t o tithi, Yearly
tithi.
9. Onscreen Prompts: It can be set to None, Indian or Hijri date.
Calculator
The calculator can add, subtract, multiply and divide.
Currency Converter
You can make currency conversions. Press OK after enter the exchange rate, and then
enter the number of the currency, and press OK to get the result.
Notes
You can view and edit the memo of a specified date with this function,
Flash Light
You can turn On/ Off the flash light function.
TIP: In the standby mode, press and hold the
key to activate flash light.
29
Page 35
30
Bluetooth
You can transfer data, such as music to other de vice using Bluetooth. Search th e device
and accept/trasfer data. The received data is automatically stored in the directory.
Power: Bluetooth Switched on or off.
Inquiry audio device: You can search audio device.
Remote control: Connect by remote HID host device.
My device: Can inquiry new device.
Active devices: Can use Active devices connected.
Settings: Some devices can be set up.
About: Can read information about my devices.
Services
STK Service
This service is offered as the SIM card service provided by the network operator.
Internet Service
WAP enables you to tour around the Internet world easily and pleasan tly. Please follow the
steps described below:
1. Homepage: The default Internet Web Address.
2. Bookmarks: Save the Web address you often use.
3. Recent Pages: Records after you browse the Website.
4. Offline Pages: You can view offline pages which you saved.
5. Input Address: Press the left soft key to access Enter Addres s, and then inp ut th e web
address to go to the Internet.
6. Service Inbox: Messages sent to users from the Web site.
7. Settings: You can configure Select SIM, Edit Profile, Browser Options, Service
Message Settings, Clear Cache, Clear Cookies and Trusted Certificates.
Data Account
Press the left soft key to perform the following steps:
1. GSM Data: Edit the GSM account.
2. GPRS: Edit the GPRS account.
Extras
Alarm
The mobile phone provides several alarms and you can set them as per your need.
Page 36
31
World Clock
Scroll to browse every city’s time zones in the world map. The related date and tim e will be
displayed at the bottom of the screen.
Stopwatch
The stopwatch has two modes -- Typical stopwatch and Nway stop watch, and you can view
the records of both of those modes.
To do list
You can View, Add, Edit, Delete, Delete overdue, Delete all, Send vCalendar, Save as file
and so on as desired. Start up the Memo and press OK. Press Option to access the next
step to add a new memo.
Fun Spice
Fun Spice menu is specifically for the entertainment purpose and all the functions belonging
to this menu are chargeable. All the functions of Fun Spice will work only if GPRS is
activated on your SIM card.
SpiceGang
It is a wap portal from where user can download Ringtones, Wallpapers, Animations, Videos
and other kind of content.
Step1: Check the GPRS settings for your operator.
Step2: Initiate SpiceGang wap portal to browse and download the content.
Step3: Charges for download apply as per operator pricing.
Explore the whole world of Entertainment with SpiceGang.
Ngpay
WHAT IS NGPAY?
ngpay is India’s first mobile marketplace.
You can use ngpay to bu y air & rail tickets, pay your bills, bu y mo vie tickets, shop for boo ks
& gifts, do banking, make payments and more from your mobi le phone in a fast, simple a nd
secure fashion.
ngpay offers a range of services from it’s network of partners view current list. In a simple,
consolidated menu, you can discover and choose merchants, banks, or service providers
with whom you want to transact.
HOW CAN I USE NGPAY?
Step 1: Register with ngpay
Register with ngpay by providing a few details - name, mobile no & address and a 6 digit
ngpay PIN.3
Step 2: Create your “My Services” List
Page 37
32
Create a list of your favorite ngpay partners and services. You can always update this list.
Step 3: Transact with your favorite partners
Select any partner from your favorite list and go thro ugh the i ntuitive ste ps. Once you reac h
the pay screen while transacting with any partner, pay using a variety of payment
instruments. Currently, your regular Visa/MasterCard cr edit cards and HDF C Bank Account
are supported.
Step 4: Retrieve Transaction details
Your transaction details get stored in the ngpay History under the My Profile menu. In
addition, ngpay also sends you a SMS and an email with the transaction details.
HOW SAFE IS NGPAY?
ngpay transactions offer security levels similar to ATM transactions. Once you become a
ngpay user, for your security you will need to enter your uni que 6-digit PIN, ever y time you
make a payment transaction. This PIN number is NOT stored on your ha ndset, so hacking
your stolen handset will not put you at risk.
ngpay's Mobile Wallet is a tamper-proof digital wallet on your phone and it stores your Bank
account/card details in an encrypted form. Even if you lose your phone, u nauthorized users
cannot access ngpay or your payment/banking transactions without your uniq ue ng pay PIN.
What’s more, you can simply call ngpay Custome r Car e @ + 91 80 670 0400 0 or S MS < your
message> to +91 99009 06677, and block ngpay on your phone.
ngpay respects your privacy. ngpay does not store your card / bank information on its
servers, neither do we share your personal information with any third party - other than those
ngpay Partners that you have select ed to use. These P artners may contact you dir ectly for
service related issues.
If your mobile goes off during a transaction due to either low battery charge or bad
connectivity, rest ass ured that your credit card will not be debited. Charges are debited to
your credit card only on the successful completion of a payment transaction.
For the technically - minded...
ngpay provides 128-bit end-to-end financ ial grade security from user ’s handset, through to
the application servers. It uses an innovative approa ch based on the concept of application
layer security and has been independently certified for financial transactions.
Email2SMS
Emergic Email2SMS is a product of Netcore Soluti ons Pvt. Ltd. provided by Spice Mobiles.
Email2SMS allows you to receive email on your phone via SMS without GPRS. You can
Read, Reply, Com pose and Forward your emails via SMS. This service is only a vailable for
Gmail, Indiatimes and Corporat e Account Holders. Spice Mobiles offers FREE subscription
for one month.
1. Just send SPICE START <Location> to 575758 to register for Email2SMS service.
For composing new mail type NEW <Receiver's Email-Id> S: <Subject> B: <Message> and
send it to 575758.
2. For replying to any mail types REPLY <Message-Id> <Message> and send it to 575758.
3. For replying to all in the mail type REPLY <Message-Id> <Message> and send it to
575758.
Page 38
33
4. For forwarding the mail type FW D <Message-Id> <Receiver's Email-Id> <Message> an d
send it to 575758.
5. For reading the remaining part of mail types READ <Message-Id> and send it to 575758.
NOTE: Message-Id is the number which you get at the end of SMS. i.e., 01, 02, 03, 04.
For more details contact Customer Support:
Phone: +91 22 6662 8130,
[email protected]
Disclaimer: For any Third Party application, Spice Mobiles disclaims all responsibilities from
its usage, whether express or implied.
Reuters
Reuters India gives you the latest India, World and Business news and more. Also, get the
latest stock market information a long with tools like the currenc y converter and weather in
your city on your mobile phone.
NOTE: Please ensure that you have GPRS settings in your phone to open Reuters. Contact
your operator for GPRS settings.
Vuclip
Vuclip is a Mobile Video search and Delivery service which gives you a premium experience
by providing real time device optimizatio n and delivery of Videos. Write the search term for
video in the search box and you get options for both downloading and streaming. Videos can
be played in different resolutions and in parts. You can also create your own playlist by
adding your favorite video to ‘Add to my Cliplist’ tab.
Please ensure that you have GPRS settings in your phone to open Vuclip. Contact your
operator for GPRS settings.
Ibibo
Now connect with the ibibo community on Spice Mobiles. Go and create your profile, search
for people based on their age, sex & location, make new friends and send or receive blurbs.
Invite your existing friends to join your new community.
The services pre loaded on Spice Phone s are Make New Friends, Cricket Update, Movie
Update, and Free SMS
Please check your GPRS settings before accessing Ibibo.
Free SMS
Free SMS service is powered by ibibo. You can now send free SMS to your friends using this
feature. You require GPRS connection to use this feature.
Please contact your operator for GPRS activation.
Page 39
34
MGurujee
MGurujee is India's leading M-Learning portal delivering uniqu e anytime anywhere mobile
phone based learning experience with access to a wide variety of quality knowledge content
from market leaders.
NOTE: Please check your GPRS settings before accessing MGurujee.
Privacy Protection
Did some one scan your Personal Messages when you were out? Get smarter with QT-65's
Privacy Protection advantage. Keep your Phone numbers, SMS and Call Records password
protected so that no one gets to know your secrets. Can Keep 1000 Numbers of Phone
Book, SMS up to 1000, 20 each of Diale d Calls, Received Calls and Missed Call Records,
your personal notes like different passwords, account nos. etc (Above all are shared
between both Private and Non-private Menu and for SM S with SIM Card S MS and handse t
SMS). The default password is 1122.
Mobile Tracker
Now be sure of your mobile phones with Mobile Tracker offered by Spice Mobiles. This
feature allows users to track their phone if the y are lost or sto len. Switch on Mobile Tracker
application and whenever a new SIM is inserted in your phone you will receive a SMS on pre
defined numbers.
1) Tracker Mode
This function requires your network support. You can set ON or OFF. W hen the fu nction O N
and the phone change a SIM car d, the p hone will sent a mes sage to the number which you
set in Fun Spice > Mobile Tracker > Number. The message will tell you that which number
is using your phone now. The default password is 1122.
2) Number
You can set Tracker number.
TIP: This function requires your network support. When you set Tracker Mode OFF, and
then you can set the tracker number you want.
Audio Player
The Back, Forward functions correspond to slide your trajectory ball to Left and Right
respectively. Slide your trajectory ball t Up or Down to adjust volume.
Press trajectory ball to play the song. Press “List” to access t he Play List, and then select
Option to perform the following functions:
Note: The current system does not support some MP3 with a non-standard format.
1. Play: to play the specified music.
2. Details: Filename, Channel, Quality, Size, Time and so on.
3. Add to Ringtones: You can use MP3 music as the ring tone for incoming calls.
4. Refresh List: You can refresh the music file list of the phone.
Page 40
35
5. Settings: You can set Player Settings, Display Settings, Sound Effects, and Bluetooth
Settings.
Note: Press the side ke y to adju st t he vol ume. Make sur e t hat the volume is app rop riate f or
your hearing while using the audio player.
To enjoy non-stop music, please download music to the “My Music” folder of phone’s internal
memory recognized as a USB disk on your PC. The Audio Player of the phone will
automatically play music files from the “My Music” folder. You may need to refresh it
manually from the settings in case you have earlier selected manual refresh settings.
Slide Show
Select a folder and then you can enjoy the slide show without manual modulation.
Menu Manager
Menu Manager lists all the main menu functions of your phone. You can choose to set. The
selected menu will be incl uded within t he main menu an d th os e that ar e n ot s electe d will b e
shielded.
Page 41
APPENDIX
Appendix A: Guidance on Entry Methods
This phone provides input methods, which can be used in editing the Phone Book, short messages,
memos, greetings, alarms and other text applications.
The Icons of Input Methods
After entering different kinds of edit windows (including edit phonebook, short messages. etc.), the
icons of input are as follows:
“123”: The Entry method of Numeric appears as: “123”
“abc”: The entry method of Multitap abc appears as: “abc”
“Abc”: The entry method of Multitap Abc appears as: “Abc”
“ABC”: The entry method of Multitap ABC appears as: “ABC”
“eZi abc”: The entry method of eZiText® Smart abc appears as: “eZi abc”
“eZi Abc”: The entry method of eZiText® Smart A bc appears a s: “eZi Abc”
“eZi ABC”: The entry method of eZiText® Smart ABC appears as: “eZi ABC”
“HI ”: The entry method of Multitap Hindi appears as: “HI”
“BN ”: The entry method of Multitap Bengali appears as: “BN”
“TE”: The entry method of Multitap Telugu appears as: “TE”
How to Switch Between the Input Methods
Press the key to switch the input methods.
e.g.: If the current input is Smart abc t he scree n w ill show “ eZi abc”. Press the key, to go to abc,
and the screen will show “abc”.
Press key to switch the uppercase and lowercase; Press the key to switch the letters/
numbers/ symbols between the upper row and the lower row.
How to Input Special Symbols
If you want to input special symbols, such as " @ = < >”, etc., please press the key at the right
bottom of your keypad.
36
Page 42
37
Appendix B: Troubleshooting
This section lists some problems that you might meet while using your phone. If you feel that your
phone do not operate normally, please reset settings first, and then follow Troubleshooting Guide. If
you are still unable to solve problems, please contact the authorized service center or the store from
where you have purchased the phone.
Problems Solutions
Can not
answer or
make a
call
Make sure that the phone has been switched on.
Make sure that the battery is charged.
Make sure that the signal intensity is high enough.
Make sure the own number function in the call setting is system
preset or number sending.
Make sure the line switch in call setting is the system preset line.
Check whether you hav e set up call bar ring or fix ed diali ng or any
other safety function.
Check whether you have set up call diverts. Check whether you
have inserted the SIM card correctly.
Low
voice
Check if the volume has been set too low.
No ring
Check whether you have set up the” Silent” option.
Check whether the ring volume is not too low.
Move away from a nois y place to ch eck i f you can h ear t he pho ne
ringing.
Check whether you have set up call diverts.
T-Flash
card
detect
slowly
Format your T-Flash card with your phone.
Note: To protect your files from getting lost, please backup the
important information into the safe place before formatting the
card.
Appendix C: FCC Statement
This device has been tested and found to comply with Part 15 of the FCC rules. Performance is
subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
3. Changes or modifications not expressly approved by the manufacturer or authorized service
center could void the user’s authority to operate this equipment.
Loading...