clinical wheelchair seating
Medifab Ltd
fasterresults@spexseating.com
New Zealand: 32 Detroit Drive, Rolleston 7675 Call 0800 543 343 Fax 0800 633 322
Australia: 26 Pardoe Street, Devonport, TAS 7310 Call 1300 543 343 Fax 1800 11 6000
International: Call +643 307 9790 Fax +643 307 2820
www.spexseating.com
Instructions on Reverse Side
shoulder strap guides
1400-6692-000
EC REP
BEO MedConsulting Berlin GmbH
Helmholtzstr, 2-9
10587 Berlin Germany
Tel: +49-30-318045-51
Installation & user manual
Tools required: 10 mm Ring Spanner
1. Remove the backrest squab
from the backrest shell.
2. Fasten the shoulder guides
to the shell as shown. The shoulder
guides should be approximately
35mm above the top of the shell.
3. Tighten using a 10 mm
Spanner.
4. Width can be adjusted by
reversing the position of the guides.
5. Feed harness straps through
the guides.
Loading...