BIOSYSTEMS MULTIPRO
®
Biosystems MultiPro Options
Option Code Comment
Alkaline A Biosystems MultiPro Alkaline and Li-Ion batteries are interchangeable. Li-Ion version includes charger.
Rechargeable N Both Li-Ion and Alkaline versions are available in value packs and Confined Space Kits.
Confined Space Kit (CSK) C Confined Space Kits contain standard accessories, standard sized calibration gas and fixed flow rate regulator
conveniently packaged in a rugged waterproof carrying case.
Value pack V Value Pack kits contain standard accessories, compact sized calibration gas, fixed flow rate regulator, and
foam-lined carrying case.
Datalogging D Enables the Biosystems MultiPro to record and download measurements. This option is available as an upgrade
after purchase. Download software must be purchased separately. Computer must support IrDA to download or
USB for use with an automatic dock.
Biosystems MultiPro Sensors
Part Number Description Range Resolution
54-49-80 LEL — Combustible gas 0 — 100% LEL 1% LEL
54-49-90 O2— Oxygen 0 — 30%/Vol. 0.1%
54-49-25 CO — Carbon Monoxide 0 — 999 PPM 1 PPM
54-49-02 H2S — Hydrogen Sulfide 0 — 200 PPM 1 PPM
54-49-14 Duo-Tox — Dual channel CO/H
2
S CO: 0 – 999 PPM 1 PPM
Provides substance specific readouts for CO and H2SH
2
S: 0 – 200 PPM 1 PPM
54-49-200 Biosystems MultiPro Sensor Exchange set — O2, LEL, Duo-Tox
54-49-201 Biosystems MultiPro Sensor Exchange set — O2, LEL, CO
54-49-202 Biosystems MultiPro Sensor Exchange set — O2, LEL, H2S
www.sperian.com
Sperian Protection Instrumentation, LLC
651 South Main St., Middletown, CT 06457 | tel: 1.800.711.6776 | fax: 1.800.995.4992
CONFINED SPACE GAS DETECTOR
Biosystems MultiPro Remote Accessories
Part Number Description
54-49-102 Continuous sample pump for Biosystems MultiPro. Includes 10'
of sample tubing and sample probe assembly.
54-49-104 Sample draw/calibration adapter.
54-49-105 Sample draw kit. Includes adapter, squeeze bulb, 10' of tubing
and sample probe assembly.
54-05-A0403 Sample probe assembly. Does not include tubing, squeeze bulb,
or sample draw adapter.
54-05-A0405 Sample probe assembly with 11.5" stainless-steel probe
tube. Does not include tubing, squeeze bulb, or sample
draw/calibration adapter.
Biosystems MultiPro Charging
& Datalogging Accessories
Part Number Description
54-49-103-1 Slip-in charger (110 VAC) for Biosystems MultiPro.
Includes “wall cube” supply.
54-49-103-12 Slip-in charger (12 VDC) for Biosystems MultiPro. Includes
“cigarette lighter”styleadapter, and vehiclemounting hardware.
54-49-106 Biosystems MultiPro Alkaline battery pack.
54-49-107 Biosystems MultiPro Li-Ion rechargeable battery pack.
54-26-0603 Biosystems MultiPro BioTrak Software Kit. Includes BioTrak
software and manual.
54-26-0605U Infrared communication device (USB — IrDA) — Requires one
available PC USB port.
Most Common Biosystems MultiPro
Detector Configurations
Part Number Description
54-48-100 LEL
54-48-200 O
2
54-48-300 LEL / O
2
54-48-301 LEL / O2/ CO
54-48-302 LEL / O2/ H2S
54-48-314 LEL / O2/ Duo-Tox (CO/H2S)
BIOMPRO Rev. 4/10
Biosystems MultiPro Certifications: UL Class I, Division 1, Groups A, B, C, D Temp code T4; UL Class ll, Division 1, Groups E, F, G; UL Class III; CSA Class I, Division 1, Groups A, B, C, D
Temp Code T4; ATEX (DEMKO) EEx ia d IIC T4; CE Mark; IECEx Ex ia d IIC T4; CQST (China) Ex ia d IIC T4
WEIGHT AND DIMENSIONS
■ With Alkaline Battery: 9.9 ounces
(280 grams); with pump: 13.1
ounces (370 grams)
■ With Li-ion Battery: 7.8 ounces
(220 grams); with pump: 10.9
ounces (310 grams)
■ Dimensions: 4 1/2" (11.4 cm) H x
2 11/16" (6.8 cm) W x 1 11/16"
(4.3 cm) D
■ Dimensions with Pump Installed:
6 3/4" (17.1 cm) H x 2 11/16" (6.8
cm) W x 1 11/16" (4.3 cm) D
Sperian, Biosystems and MultiPro are trademarks or registered trademarks of Sperian Protection and its affiliates.