AMC series contoured microscope platforms
High Performance anti vibration platform for Microscopes
AMC-1 with microscope
AMC-3
Type Performance Surface Isolation Application
AMC-1 Scientific Electroless Nickel 2Hz air Performance microscopes
AMC-3 Scientific White epoxy powder 2Hz air Performance microscopes
AMC-7 Scientific White porder epoxy 7Hz elastomer Laboratory microscopes
AMC-1
Contoured shape ideal for use with microscopes
AMC-1 and 3 rolling diaphragm air isolator removes up to 99 percent of vibrations
AMC-1 electroless nickel version is ideal for use in cleanrooms
AMC-7 with sorbothane isolators gives economic isolation
Ideal for laminar flow cabinets, biohazard areas , cleanrooms
These platforms remove unwanted vibrations which limit the performance of microscopes. Their T shaped profile allows users to place
their arms on either side of the platform, while the rear section is wide enough to accomodate most makes of microscope.
Air platforms are made from aluminium parts and are fully non-magnetic. They meet the most stringent cleanliness requirements , such
as Class 1 and are resistant to most forms of biological and chemical attack. Their simple shape makes them very easy to clean. We offer a
choice of white epoxy powder or electroless nickel finishes.
Air platform top plates rest on three pneumatic damped rolling diaphragm isolators. Typical building vibrations , which cause the most
problems, are the cyclical ones between 7 and 30Hz. These isolators have a natural frequency of around 2Hz and start to effectively isolate
vibrations from 7Hz upwards, greatly outperforming simple air cushion and rubber isolators which have much higher natural frequencies.
The isolators are inflated using a conventional bicycle pump. When pressurised the isolators float the platform free from the bench it is
placed on and so isolate the microscope placed on top from vibrations present on the worksurface via a cushion of air enclosed by the
rolling diaphragm.
AMC-7
The AMC-7 has three elastomeric isolators which give good isolation above 20Hz and features a white epoxy finish over a steel base
Product Details
45
10
0
asda
25
0
Isolation dampening chamber
Isolator crossection
Specifications
Air Isolators
0 82.5 310 400 580
Dimensions mm's
AMC-1 AMC-3 AMC-7
asda
380
300
190
80
0
0 310 580
Dimensions mm's
Dimensions (LxWxH) mm 580x380x55 580x380x55 565x380x45
Load capacity kgs 100 100 25 (75 optional)
Level adjustment mm 5 5 n/a
olators 3off air rolling diaphragm 3off elastomeric
damped. Pumped up
Isolation performace
50Hz 97 percent percent 95 percent
100Hz 99 percent 98 percent
Natural frequency vertical 2Hz 7Hz
Natural frequency horizontal 2Hz 2Hz
Surface finish Electroless Nickel White epoxy White epoxy
Construction Aluminium Steel
Bacterial resistance No growth
Fungal resistance No growth
Heat aging Stable
Working temperature -20C to 160C
asda
380
190
0
Weight kgs 5 12
Loading...