Pome Fruit Grinder
page 3 of 8
1 General information
Dear Customer,
You purchased a new product from Speidel. Thank you very much for your trust. When it
comes to our products, quality and functionality are of our primary concern.
Intended use:
The pome fruit grinder is designed for the fine cutting of pomaceous fruit (e.g., apples,
pears) so that a direct and optimal processing in a juicer (SPEIDEL Hydro Press)
provides the best juice yield possible. The pome fruit grinder was delivered in ready-touse condition and may only be used for crushing pome fruit. The grinder is not suitable
for grinding of stone fruits such as cherries, etc. and shall never be used for shredding
garden waste such as tree cutting, etc.
Operating instructions:
In order to ensure your new pome fruit grinder will work reliably and safely from the first
time you use it and throughout its entire operating life, we have written these instructions.
Please read them carefully before using the product for the first time. If you follow these
tips and instructions carefully, the unit will work to your utmost satisfaction and will last
you for a long time to come. Should you decide to pass this product on to a third party,
please ensure to hand over the operating manual as well. To ensure, that you will enjoy
your newly purchased grinder, please observe the following safety and operating
instructions.
Declaration of Conformity
We, SPEIDEL Tank- und Behälterbau GmbH, herewith declare that the "Pome Fruit
Grinder" referred to in these instructions to which this declaration relates, conforms with
the requirements of the following guidelines:
EMV 2004/108/EG, Low Voltage 2006/95/EG, Machinery Directive 2006/42/EG
Manufacturer:
Speidel Tank- und Behälterbau GmbH
Krummenstrasse 2
D-72131 Ofterdingen
Germany
www.speidels-hausmosterei.de
www.speidel-behaelter.de
2 Safety instructions
General safety instructions:
• The equipment and the electrical connection including switch must be regularly
inspected for signs of damage. If damage is detected, the unit must not be used.
• Install the power cord to prevent it from coming into contact with sharp objects (e.g.
knives). Ensure to unwind the cable completely.
• If using an extension cord, the cable cross-section shall be at least 1.5 mm². Please
ensure to completely unwind this extension cord as well. Do not use multi electrical
outlets, as this unit is too powerful. Risk of fire!