Speed Queen SQWADREW173001 Install manual
Installation Instructions
for Dryers
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
www.alliancelaundry.com
Part No. D514830R3
October 2018
WARNING
WARNING
Part No. D514830R3
Risk of fire. Highly flammable material.
IMPORTANT: Purchaser must consult the local gas
supplier for suggested instructions to be followed if
the dryer user smells gas. The gas utility instructions
plus the SAFETY and WARNING note directly above
must be posted in a prominent location near the dryer
for customer use.
W881
Read all instructions before using unit.
WARNING
FOR YOUR SAFETY, the information in this manual
must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or death.
W033
WARNING
• Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
WHA
•
•
•
• Clear the room, building or area of all occu-
• Immediately call your gas supplier from a
• If you cannot reach your gas supplier, call the
• Installation and service must be performed by a
qualified installer, service agency or the gas supplier.
O DO IF YOU SMELL GAS:
T T
Do not try to light any appliance.
Do not touch any electrical switch; do not use
any phone in your building.
pants.
neighbor’s phone. Follow the gas supplier’s instructions.
fire department.
WARNING
• Installation of unit must be performed by a qualified installer
• Install clothes dryer according to manufacturer’s
instructions and local codes.
• DO NOT install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type)
duct is installed, it must be of a specific type
identified by the appliance manufacturer as suitable for use with clothes dryers. Refer to section
on connecting exhaust system. Flexible venting
materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct
clothes dryer airflow and increase the risk of fire.
.
W729R1
WARNING
To reduce the risk of severe injury or death, follow all
installation instructions. Save these instructions.
W894
WARNING
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
W053
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
W052
This product uses FreeRTOS V7.2.0 (www.freertos.org).
3
The following information applies to the state of Massachusetts,
Part No. D514830R3
USA.
• This appliance can only be installed by a Massachusetts licensed plumber or gas fitter.
• This appliance must be installed with a 36 inch
[910 mm]
long flexible gas connector.
• A “T-Handle” type gas shut-off valve must be installed in the
gas supply line to this appliance.
• This appliance must not be installed in a bedroom or bathroom.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
4
Table of Contents
Part No. D514830R3
Dimensions............................................................................................. 6
Installation............................................................................................. 8
Before You Start............................................................................................. 8
Supplies..................................................................................................... 8
Order of Installation Steps............................................................................8
Position and Level the Dryer............................................................................8
Connect Dryer Exhaust System...................................................................... 10
Exhaust Direction......................................................................................11
Exhaust System.........................................................................................12
Gas Dryers - Connect Gas Supply Pipe........................................................... 12
Electric Dryer Only - Connect Electrical Plug..................................................14
Earth/Ground Information.......................................................................... 14
Connecting Power Cord with Three-Wire Plug.............................................15
Connecting Power Cord with Four
Reverse Door, if Desired................................................................................18
Wipe Out Inside of Dryer...............................................................................20
Plug In the Dryer.......................................................................................... 20
Electric Dryer........................................................................................... 20
Gas Dryer................................................................................................. 20
Recheck Steps.............................................................................................. 21
Check Heat Source........................................................................................21
Electric Dryers.......................................................................................... 21
Gas Dryers................................................................................................21
-Wire Plug.............................................. 17
©
Copyright 2018, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed
written consent of the publisher.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Installer Checklist.................................................................................23
5
Dimensions
DRY2638N_SVG
JK
I
H
G
F
E
D
C
B
A
DRY2639N_SVG
F
E
D
C
B
A
J
K
M L
I
H
G
1
Part No. D514830R3
Electric Models
A * 40.42 in. [1027 mm]
B * 39.61 in. [1006 mm]
C * 15.44 in. [392 mm]
D * 4 in. [102 mm]
Dimensions
E 15.4 in. [391 mm]
F 26.875 in. [683 mm]
G * 4.5 in. [114 mm]
H 0.4 in. [10 mm]
I 8 in. [203 mm]
J 28 in. [711 mm]
K 23.5 in. [597 mm]
NOTE: Exhaust openings are 4 inch [102 mm] metal
* With leveling legs turned into base.
ducting.
Gas Models
1. 3/8 in. NPT Gas Connection
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
6
A *40.42 in. [1027 mm]
Part No. D514830R3
B *39.61 in. [1006 mm]
C *15.44 in. [392 mm]
D *2.8 in. [70 mm]
E 2.3 in. [60 mm]
F 15.4 in. [391 mm]
G 26.875 in. [683 mm]
H 4 in. [102 mm]
I *4.5 in. [114 mm]
J 0.4 in. [10 mm]
K 8 in. [203 mm]
L 28 in. [711 mm]
M 23.5 in. [597 mm]
Dimensions
NOTE: Exhaust openings are 4 inch [102 mm] metal
ducting.
NOTE: Gas models cannot be vented out left side of
cabinet because of burner housing.
IMPORTANT: The dryer should have sufficient clearance around it for needed ventilation and for the ease
of installation and servicing. For maximum drying performance, we recommend that more clearance be allowed around the dryer than the clearances that are
listed throughout this manual.
* With leveling legs turned into base.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
7
Loading...