Speed Queen NX18, NX30 User Manual

qwert

COIN & CARD-OPERATED

Softmount Washer-Extractors

18 lb (8 kg)

30 lb (14 kg)

Built Better To Last Longer

NX18 NX30

Capacity - lb (kg) 18 (8) 30 (14)

Width - in (mm) 26” (660) 30 3/4” (780)

Depth - in (mm) 29 1/8” (739) 33 1/8” (842)

Height - in (mm) 40 7/8” (1038) 47 3/8” (1202)

Cylinder Diameter - in (mm) 20 7/8” (530) 25 5/8” (650)

Cylinder Depth - in (mm) 13” (330) 15 3/4” (400)

Cylinder Volume - cu. ft. (liters) 2.7 (76) 5.9 (132)

Door Opening Size - in (mm) 11 7/8” (300) 11 7/8” (300)

Door Bottom to Floor - in (mm) 11” (280) 15” (381)

Wash Speed - RPM 10-50 10-50

Distribution Speed - RPM 85 85

Extract Speed - RPM 250-1000 100-1000

G-Force Factor - RPM 74-296 88-363

Water Inlet Conn. - in (mm) 3 x 3/4” (19) 3 x 3/4” (19)

Drain Connection Size - in (mm) 2” (51) 2” (51)

Motor Size - HP (kw) 1 (.75) 2 (1.5)

Voltage/Hz/Phase Non-heat

200-240/50-60 1 200-240/50-60 1

Circuit Breaker 15 15 Voltage/Hz/Phase* Elect. heat 200-240/50-60/3 200-240/50-60/3

Circuit Breaker 25 50 Voltage/Hz/Phase Elect. heat 380-415/50-60/3 380-415/50-60/3

Circuit Breaker 16 32 Shipping Dimensions - H 44 7/8” (1140) 51 5/8” (1310)

in (mm) W 29 1/8” (740) 33 1/2” (850)

D 33 1/8” (840) 37” (940)

Net Weight - lb (kg) 465 (211) 717 (325)

Shipping Weight - lb (kg) 514 (233) 783 (355)

Agency Approvals CE, ETL CE, ETL

AC05-208

Washer-Extractor Specifications



* Special order may require longer time, check with factory.

Due to the continous product improvements, design and specifications subject to change without notice.

www.speedqueen.com

Variable Speed Drive

Since all fabrics have different

extract speed requirements, our

line of softmount washer-extractors

have variable extract speeds. A low

extract speed is ideal for synthetics,

permanent press and blends. A

mid-range extract speed is ideal

for mattress pads, blankets and

spreads. A high extract speed is

ideal for terry and cotton items.

A higher G-Force during extraction

lowers the water retention of the

fabrics being processed. Lower water

retention also reduces the gas or

electricity used during the drying

process, saving money on utilities

and improving customer turnover.

Superior Performance Suspension

Extensive

engineering

efforts have

developed a

heavy-duty

suspension

system

designed for

superior washing performance

and absorb out-of-balance load

vibrations without the need for

special foundations.

Durable 304

polished

stainless steel

construction

on the washer-

extractors

won't corrode,

chip, crack or pit with normal use,

and is extremely rust resistant. In

fact, the polished stainless exterior,

top and front panels will maintain

their lustrous appearance for years

to come.

Stainless Steel Construction

Speed Queen’s 18 lb and 30 lb

capacity softmount washer-

extractors fit through 36” door

openings. Softmount washer-

extractors require no additional

cement base, making installation

easier and less costly.

Easy Installation

As the No.1 supplier of commercial coin-operated laundry equipment, Speed Queen continues to lead in customer satisfaction with its topof-the-line commerical laundry equipment. Manufactured with quality components, Speed Queen coin-operated washers and dryers are durable, rugged and built better to last longer.

Commercial Quality

Our advanced

microprocessor

control is

designed to

offer eight pre-programmed cycles.

These cycles can be customized to

fit your specific needs. Customized

cycles can significantly reduce

water consumption or reduce

turnaround time by doing the

maximum amount of cleaning in

the shortest amount of time. The

micro control is easy to operate

utilizing a separate start pad and

cycle symbols designed to match

garment care labels.

Fully Programmable Control