Speed Queen LTSA7AWN, LTSA9AWN, LTSA7AWN1500 User Manual

DOE Compliant for
Water and Energy Standards
MULTI-HOUSING
Manual Control
ADA Compliant for Side Reach
Ultra High Efficient With
High Speed Extract and Low Water Consumption
Commercial Stack Washer/Dryer
Front Control
RELIABLE COMMERCIAL PRODUCTS
Large Door Opening
With Stainless Steel Hinge
ENERGY STAR® Qualified
Multi-Compartment
Supply Dispenser
Durable
Galvanized Steel
Cylinder
Upfront Lint Filter
Easy to Clean and
Secured
MANUAL STACK WASHER/DRYER SPECIFICATIONS
Elec (“E” - 208V) Elec (“E” - 240V) Gas (“G”)
LTSA7AWN1500
LTSA7AWN
LTSA9AWN Activation Manual Appearance
Color White
Control Panel Selection Front Water and Energy Info
Modified Energy Factor “MEF”: ft³/kWh/cycle (Liters/kWh/cycle) 2.04 (57.77) Water Factor “WF” - gal/ft³ (Liters/Liter/cycle) 4.9 (0.65) Water Consumption - gal (Liter) 13.9 (52.6) Average Hot Water - gal (Liter) 1.74 (6.6)
Technical Info
Weight - lb (kg)
Shipping Weight - lb (kg)
Electrical Requirements
Elec 350 (159) Gas 355 (161) Elec 380 (172) Gas 385 (175)
Elec 208V Elec 240V
Gas
120/208/60/1 120/240/60/1 30 amp* 120/60/1 15 amp
Overall Dimensions - WxDxH in (mm): 26 7/8” (683) x 28” (711) x 75 1/4” (1911)
Washer
Stainless/Galvanized Basket Volume - cu. ft. (liters) 2.84 (80) Cycle Temp - High 160º, Med 155º, Low 145º, Delicate 115º, No Heat Motor 1 HP 750 W Water Pressure psi (Bar) Pressure Fill 20 to 120 psi 1.4/8.3 Spin Speeds - RPM 500, 650, 1000 Drain Pump
Dryer
Galvanized Cylinder Volume - cu. ft. (liters) 7.0 (198) Air Outlet Diameter - in (mm)
4” (102)
Exhaust Airflow - cfm (liters/sec) 220 (105)
Heating Element
Elec 208V Elec 240V
Gas
4750W, 208V 5350W, 240V 25,000 Btu
Motor 1/3 HP, 5.5 amps
Performance/Features
Unit is Factory Assembled Top and Lower Unit
Agency Approval
Elec Gas
cULus
CSA
c
us
* Electric dryers come equipped for 120/240/60/1 operation. They can be field converted to operate on 120/208/60/1 with optional 61928 conversion kit.
** Gas dryers can be field converted for operation on LP gas with optional 458P3 conversion kit.
For the most accurate information, the installation guide should be used for all design and construction purposes. Due to continuous product improvements, design and specifications subject to change without notice. The quality management system of Alliance Laundry Systems’ Ripon facility has been registered to ISO9001:2008.
23.5 in
(59.69 cm)
2.0 in
(5.1 cm)
7.0 in
(17.8 cm)
24.0 in
(60.96 cm)
*64.75 in (164.47 cm)
*55.75 in (141.6 cm)
*13.1 in
(33.3 cm)
1.5 in
(3.81 cm)
METERED MODELS
8.0 in
(20.3 cm)
28 in
(71.1 cm)
(5.1 cm)
*with leveling legs turned into base
*76.5 in (194.3)
*45.8 in (116.3)
2.0 in
26.9 in
(68.3 cm)
GAS MODELS
ONLY
3/8 in N.P.T.
Gas Connection
15.4 in
(39.1 cm)
2.3 in (6 cm)
*44.1 in (112 cm)
*31.1 in (79 cm)
*29.6 in (75.1 cm)
Speed Queen | 800-345-5649 | www.speedqueen.com/route
*14.5 in
(36.8 cm)
© 2013 Alliance Laundry Systems LLC AM11-0528R1
Loading...