Speed Queen ADG3TRBLACK, ADE3TR10BLACK, ADE3TR20BLACK Installation Guide
Installation Instructions
for Dryers
Original Instructions
Keep These Instructions for Futur
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
e Reference.
www.alliancelaundry.com
Part No. D514463ENR4
August 2017
IMPORTANT: The electrical installation in the site shall
comply with the Australian Electrical Standards,
AS3000, SAA wiring rules, and such local regulations
that might apply. In Australia and New Zealand, installation must comply with the Gas Installations Standard
AS/NZA 5601 Part 1: General Instructions.
Read complete Installation and Operation Instructions before using unit.
The maximum drying load dry weight shall not exceed 9.0 kg [20
pounds].
WARNING
FOR YOUR SAFETY, the information in this manual
must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or death.
W033
WARNING
WARNING
• Installation of unit must be performed by a qualified installer.
• Install clothes dryer according to manufacturer’s
instructions and local codes.
• DO NOT install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type)
duct is installed, it must be of a specific type
identified by the appliance manufacturer as suitable for use with clothes dryers. Refer to section
on connecting exhaust system. Flexible venting
materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct
clothes dryer airflow and increase the risk of fire.
W729R1
WARNING
• Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
• WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use
any phone in your building.
• Clear the room, building or area of all occu-
pants.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the
fire department.
• Installation and service must be performed by a
qualified installer, service agency or the gas supplier.
W052
IMPORTANT: Purchaser must consult the local gas
supplier for suggested instructions to be followed if
the dryer user smells gas. The gas utility instructions
plus the SAFETY and WARNING note directly above
must be posted in a prominent location near the dryer
for customer use.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
W053
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
3 Part No. D514463ENR4
Table of Contents
...............................................................................................................3
Dimensions............................................................................................. 5
Installation............................................................................................. 7
Before You Start............................................................................................. 7
Supplies..................................................................................................... 7
Parts Included............................................................................................. 7
Order of Installation Steps............................................................................7
Position Dryer Near Installation Area............................................................... 7
Position and Level the Dryer............................................................................7
Connect Dryer Exhaust System...................................................................... 10
Exhaust Direction......................................................................................11
Exhaust System.........................................................................................11
Gas Dryers - Connect Gas Supply Pipe........................................................... 12
Reverse Door, if Desired................................................................................14
Wipe Out Inside of Dryer...............................................................................15
Connect Dryer to Electrical Power..................................................................15
Electrical Requirements............................................................................. 15
Grounding Instructions.............................................................................. 16
Recheck Steps.............................................................................................. 17
Check Heat Source........................................................................................17
Electric Dryers.......................................................................................... 17
Gas Dryers................................................................................................17
All Dryers.................................................................................................18
Installer Checklist.................................................................................19
©
Copyright 2017, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed
written consent of the publisher.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
4 Part No. D514463ENR4
Dimensions
DRY2275N_SVG
M
L
K
J
I
H
G
F
E
D
C
B
A
Electric Dryers
A 569 mm [22.38 in.]
Dimensions
B 203 mm [8.0 in.]
C * 914 mm [36 in.]
D * 1022 mm [40.25 in.]
E * 1092 mm [43 in.]
F 391 mm [15.4 in.]
G * 392 mm [15.44 in.]
H 683 mm [26.875 in.]
I * 102 mm [4.0 in.]
J 11 mm [0.4 in.]
K * 114 mm [4.5 in.]
L 711 mm [28 in.]
M 597 mm [23.5 in.]
NOTE: Exhaust openings are 102 mm [4 inch] metal
* With leveling legs turned into base.
ducting.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
5 Part No. D514463ENR4
DRY2276N_SVG
O N
M
L
K
J
I
H
G
F
E
D
C
B
A
Dimensions
Gas Dryers
1. 3/8 in. N.P.T. Gas Connection
A 569 mm [22.38 in.]
B 203 mm [8.0 in.]
C * 914 mm [36 in.]
D * 1022 mm [40.25 in.]
E * 1092 mm [43 in.]
F 391 mm [15.4 in.]
G * 392 mm [15.44 in.]
H * 70 mm [2.8 in.]
I 60 mm [2.3 in.]
J 683 mm [26.875 in.]
K * 102 mm [4.0 in.]
L 10 mm [0.4 in.]
M * 114 mm [4.5 in.]
N 711 mm [28 in.]
O 597 mm [23.5 in.]
NOTE: Exhaust openings are 102 mm [4 inch] metal
ducting.
* With leveling legs turned into base.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
6 Part No. D514463ENR4
Loading...