Speed by spectre 9922 Installation Instructions Manual

Intake Installation Instructions P/N 9922

Year/Make/Model/Engine

99-04 Ford F250 7.3-V8 td
99-04 Ford F350 7.3-V8 td

99-04 Ford Excursion 7.3-V8 td

Tools Required:

• 13mm socket or wrench

• 8mm socket or wrench

• 10mm socket and wrench

• 5/16” nut driver or Flat

Blade Screwdriver

Parts List
1- Filter shield

1- Air lter

1- Intake tube

1- 4” coupler

1- Rubber vibration mount
2- M8 fender washers
2- M8 lock nuts
1- Plug
2- Grommets

3- 4” hose clamps

1- Rubber seal
1- Rubber liner

Legal for use on pollution

controlled vehicles

C.A.R.B E.O.# D-629-1

for applications listed above

For lter reorders ask at the

special order counter of your

local parts store or call:

1-800-821-4868

ask for P/N 889882

Step 1
Safety First! Before you begin
disconnect the negative
battery terminal. Verify
all components listed are
present before beginning the
installation.

Step 2
Start by loosening the clamps
securing the OE intake tube to
the turbo inlet and the air box.

Step 3
Remove the OE intake assembly
out of the engine.

Step 4
Disconnect the Air Filter Minder
Harness.

Step 7
Remove the IAT sensor from the
lower air box.

Step 5
Unclip the air box cover from
both sides and pull up and out.

Step 8
Remove the four 10mm bolts
securing the lower air box
assembly. Set bolts aside for
later use.

Step 6
Remove the Air Filter.

Step 9
Remove the lower air box from
battery tray.